SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
Hi All, Anthony Vapes back here with my review of the Wotofo Profile RDA, please see the bottom for disclaimers and links. Note: This is not marked as a sample version
Introduction:
The Wotofo Profile RDA is the latest RDA from popular vape manufacturer Wotofo (well latest available but a new Faris RDA just showed up for review as i’m writing this). Wotofo has been hit and miss for me, they’ve made some good RDAs like the recurve and nudge 22, but also a lot of overhyped and bad ones like the warrior RDA, troll RTA, and some others, so they are a bit hit and miss IMO. it’s designed in collaboration with Mr Just Right 1 which i have no clue who he is personally. The Profile RDA is a mesh coil 24mm DTL RDA with an included squonk pin that can also be used as a single coil RDA. It’s available in 6 colors, Black, SS, Gold, Gunmetal, Blue, and Rainbow. I looked around online and see it in the 25 USD price range out of china and 30ish price range in the US so good price point.
Manufacturer's Specs
album
Initial Impressions
When I first got this RDA I was pretty impressed with the design. They include cotton and mesh coils made for the RDA and sent me some extras of both, but the one thing that stood out was the spring loaded ceramic block that keeps the cotton pushed up against the mesh. That was a really good idea we haven’t seen in a mesh RDA so far so well done there. The included cotton also fits well as does the precut mesh strips although technically it’s not mesh but more of a honeycomb coil as i call them but for the sake of the review i’ll just call it mesh as many companies use that design coil and call it mesh. Overall though pretty impressed form the start.
Build Deck and Wicking (pics above)
Let’s talk about the build deck now. It’s a 2 clamp system with the clamps positioned for vertical insertion instead of horizontal like many. Very similar to the VV mesh RDA deck design except the clamps are raised off the deck. The screws come in from the side so it does work well for flat wire, mesh, and round wire builds but you do need to precut your leads. The Mesh that comes with it is cut to size however and doesn't need any modifications. The post screws are good quality flat head/phillips combo screws so nice improvement there as wotofo has normally used some cheap poor quality screws in lots of RDAs. There is also a cut out on the juice well wall that acts as a place for the top cap to lock in but doubles to add room to get your screwdriver in there to use the post screws. Overall a really nicely designed deck that works with any wire type and is easy to build on. Just note that you will need to precut leads for using anything but the included mesh strips that are precut.
Wicking on it is quite easy. It’s an RDA so nothing fancy just drop your leads to the bottom for traditional coil builds. For Mesh builds this is where it gets cool, there is a spring loaded ceramic block between the posts and this allows the cotton to be pressed against the mesh coil easier so you don’t get dry hits. Very good idea indeed. Also the included cotton they make for it fits just right (no pun intended) so you just need to cut the ends and fluff them up making wicking very easy. When using a traditional coil the ceramic block isn’t used. Overall very easy to wick for mesh or traditional coils.
Performance
Performance wise, I used it as a Single Coil RDA and a Mesh RDA. I ran 4 builds in this a fancy 3mm ID build, a fancy 4 mm ID build, 1 mesh build with the included mesh and 1 simple round 4mm ID build. For size I found it worked best with the 4mm ID and the fancy builds or using the mesh. For the mesh coil I will say it’s the best flavor i’ve gotten from mesh in any RDA overall so it’s the best option for a mesh RDA. As a single coil RDA it’s just ok with a large fancy build and not worth much with the round builds and pretty space limited. Overall I’d say it’s great for a mesh RDA, but just decent not using mesh and overall not as good as a good single coil RDA but still the best RDA for mesh.
Introduction:
The Wotofo Profile RDA is the latest RDA from popular vape manufacturer Wotofo (well latest available but a new Faris RDA just showed up for review as i’m writing this). Wotofo has been hit and miss for me, they’ve made some good RDAs like the recurve and nudge 22, but also a lot of overhyped and bad ones like the warrior RDA, troll RTA, and some others, so they are a bit hit and miss IMO. it’s designed in collaboration with Mr Just Right 1 which i have no clue who he is personally. The Profile RDA is a mesh coil 24mm DTL RDA with an included squonk pin that can also be used as a single coil RDA. It’s available in 6 colors, Black, SS, Gold, Gunmetal, Blue, and Rainbow. I looked around online and see it in the 25 USD price range out of china and 30ish price range in the US so good price point.
Manufacturer's Specs
- Collaboration between Mr. Just Right 1
- 24mm Diameter
- Deep Juice Well
- Superior Stainless Steel Construction
- Spacious Build Deck
- Wide Clamp Style Ceramic Support
- Side Secured via Hex Screws
- Wide Terminals for Larger Builds or Leads
- Single or Dual Coil Configuration
- Spring-Loaded Ceramic Cotton Support
- Beehive Style Air Slots on Top Cap
- Detachable Structure
- 810 Wide Bore Resin Drip Tip
- Gold-Plated 510 Connection
- Available in Stainless Steel, Black, Blue, Gunmetal, Gold, and Rainbow
- 1 Wotofo Profile 24mm RDA
- 1 User Manual
- 1 6mm Agleted Cotton Strip
- 1 Extra 810 Drip Tip
- 1 Bending Tool
- 1 Clapton Coil
- 1 Mesh Style Coil Sheets
- 1 Bag of O-Rings and Screws
album
Initial Impressions
When I first got this RDA I was pretty impressed with the design. They include cotton and mesh coils made for the RDA and sent me some extras of both, but the one thing that stood out was the spring loaded ceramic block that keeps the cotton pushed up against the mesh. That was a really good idea we haven’t seen in a mesh RDA so far so well done there. The included cotton also fits well as does the precut mesh strips although technically it’s not mesh but more of a honeycomb coil as i call them but for the sake of the review i’ll just call it mesh as many companies use that design coil and call it mesh. Overall though pretty impressed form the start.
Build Deck and Wicking (pics above)
Let’s talk about the build deck now. It’s a 2 clamp system with the clamps positioned for vertical insertion instead of horizontal like many. Very similar to the VV mesh RDA deck design except the clamps are raised off the deck. The screws come in from the side so it does work well for flat wire, mesh, and round wire builds but you do need to precut your leads. The Mesh that comes with it is cut to size however and doesn't need any modifications. The post screws are good quality flat head/phillips combo screws so nice improvement there as wotofo has normally used some cheap poor quality screws in lots of RDAs. There is also a cut out on the juice well wall that acts as a place for the top cap to lock in but doubles to add room to get your screwdriver in there to use the post screws. Overall a really nicely designed deck that works with any wire type and is easy to build on. Just note that you will need to precut leads for using anything but the included mesh strips that are precut.
Wicking on it is quite easy. It’s an RDA so nothing fancy just drop your leads to the bottom for traditional coil builds. For Mesh builds this is where it gets cool, there is a spring loaded ceramic block between the posts and this allows the cotton to be pressed against the mesh coil easier so you don’t get dry hits. Very good idea indeed. Also the included cotton they make for it fits just right (no pun intended) so you just need to cut the ends and fluff them up making wicking very easy. When using a traditional coil the ceramic block isn’t used. Overall very easy to wick for mesh or traditional coils.
Performance
Performance wise, I used it as a Single Coil RDA and a Mesh RDA. I ran 4 builds in this a fancy 3mm ID build, a fancy 4 mm ID build, 1 mesh build with the included mesh and 1 simple round 4mm ID build. For size I found it worked best with the 4mm ID and the fancy builds or using the mesh. For the mesh coil I will say it’s the best flavor i’ve gotten from mesh in any RDA overall so it’s the best option for a mesh RDA. As a single coil RDA it’s just ok with a large fancy build and not worth much with the round builds and pretty space limited. Overall I’d say it’s great for a mesh RDA, but just decent not using mesh and overall not as good as a good single coil RDA but still the best RDA for mesh.