Ar mod clone with mutation v3

[Fern2987]

Will this build be safe? Its a dual parallel with 24 gauge wire 7 wrap. On ohm reader comes out to
0.15 ohms. Im using a imren 30 amp battery. Thanks if anyone replies

Sent from my SAMSUNG-SM-N900A using Tapatalk

 

[CHIEFTANG]

If you have a smart phone download and ohm calculator. They're free and you'll be able to see if you're exceeding your amps


Dem be sum nice coils boi

 

[Zamazam]

The Imren batteries are a bit over spec'd. I would seriously look at VTC4's or LGHB2 batteries, both are true 30 amp cells.

 

[Mythical_OD]

On a fully charged battery at 4.2 volts youll be pulling 28 amps and around 120watts. Which is probably too much for that battery. It might say 30 amps CDR but really the only battery on the market with a legit 30 amp CDR is the VTC4. The Imren is probably using the Pulse CDR which is usually much higher. Its probably only 20-25amp, so no, I wouldnt run that setup with that battery.

Bookmark The Steam Engine, itll be your best friend when building for mechs.

http://www.steam-engine.org/ohm.asp

 

[Fern2987]

I have the lgs laying around. Did a new build put me at .13 ohms. Fully charged lg best clouds ive ever had

Sent from my SAMSUNG-SM-N900A using Tapatalk