Hello! I love custom firmware for vapes like ArcticFox and even have my own modification (BetterJoy) - it has big interface, but works only on bigscreens.
Also, my favorite device istick 100w tc with small screen (96x16 pixels)
Inho, arcticfox has small usability, limited functiouns on key cobbinations, etc.
I suggest port main screen from pico 20700
AF use standart interface like
How small (96x16) screen can be so informative like middle screen? It just need to have new proportions.
NFE team, for example, like quite thin font like 1:3 (as for me, it is not very good and takes much space)
'big' font on small screen has 12x16 size with board pixels and 10x15 (proportions 2:3).
I suggest use thinner digets with 1:2 proporion
It looks like this
Bigger:
I used 2 different digit font version - boled in first case and thinner in second.
With this layout main screen can show up to 4 tunable infolines, but dev can made some of them hardcoded
By the way, even Eleaf on middle screen uses thin font with 16:32 - 1:2 proportion (really 14:30, but same shit)
Also, AF allows you tune too much key conbinations, but on one key combo you can set only one actions. For example, if i use TC, my key combunations;2 click s- tc/ww
3 - profile change
4 - , edit
Fire+ -settings
Fire- - update resistance (now i can not call stealth mode on TC mode)
What do I do in my firmware?
Yes, you can tune 2,3,4 key , but combos qute different
For example, if I hold Fire+ I gen menu, If hold it longer, I reset base resistance
If I hold Fire- I call stealth mode, if i hold in longer i call flashlightsom flashlight mode (useful to check screen degradation and flash sometime, if I hold it more, screen contrast will be maximum/minumum, depends on previous state).
Also, in my FW you can call brightness control with long holding +-button just +- gives keylock, long +- calls brightness control (i use 7, no 20 levels of brighness)
Also, my and SME firmware can parce +-Fire (three key buttons) and you can use it as you want
//PS it's my interface. It shows battery prcentage in realtime mode, puff duration, total puff duration, it have 1.42 bigger regular font with same proportions 1:2, I do not icons, it shows charge current and voltage on main screen, etc. But in the end, this interface more compact (for me, somebody think it is overloaded)
Actually, for minimalistic design lovers developer can make something like this (it just shows you big display can show 4 huge infolines)
Why I write suggestions here? NFE team hates me and I banned on this forum). You can copy any part of this post or just show them.
They afraid that my methods too hard and users will not like it. If you like, you can write it here, may be nfe team will change something
Also, my favorite device istick 100w tc with small screen (96x16 pixels)
Inho, arcticfox has small usability, limited functiouns on key cobbinations, etc.
I suggest port main screen from pico 20700
AF use standart interface like
How small (96x16) screen can be so informative like middle screen? It just need to have new proportions.
NFE team, for example, like quite thin font like 1:3 (as for me, it is not very good and takes much space)
'big' font on small screen has 12x16 size with board pixels and 10x15 (proportions 2:3).
I suggest use thinner digets with 1:2 proporion
It looks like this
Bigger:
I used 2 different digit font version - boled in first case and thinner in second.
With this layout main screen can show up to 4 tunable infolines, but dev can made some of them hardcoded
By the way, even Eleaf on middle screen uses thin font with 16:32 - 1:2 proportion (really 14:30, but same shit)
Also, AF allows you tune too much key conbinations, but on one key combo you can set only one actions. For example, if i use TC, my key combunations;2 click s- tc/ww
3 - profile change
4 - , edit
Fire+ -settings
Fire- - update resistance (now i can not call stealth mode on TC mode)
What do I do in my firmware?
Yes, you can tune 2,3,4 key , but combos qute different
For example, if I hold Fire+ I gen menu, If hold it longer, I reset base resistance
If I hold Fire- I call stealth mode, if i hold in longer i call flashlightsom flashlight mode (useful to check screen degradation and flash sometime, if I hold it more, screen contrast will be maximum/minumum, depends on previous state).
Also, in my FW you can call brightness control with long holding +-button just +- gives keylock, long +- calls brightness control (i use 7, no 20 levels of brighness)
Also, my and SME firmware can parce +-Fire (three key buttons) and you can use it as you want
//PS it's my interface. It shows battery prcentage in realtime mode, puff duration, total puff duration, it have 1.42 bigger regular font with same proportions 1:2, I do not icons, it shows charge current and voltage on main screen, etc. But in the end, this interface more compact (for me, somebody think it is overloaded)
Actually, for minimalistic design lovers developer can make something like this (it just shows you big display can show 4 huge infolines)
Why I write suggestions here? NFE team hates me and I banned on this forum). You can copy any part of this post or just show them.
They afraid that my methods too hard and users will not like it. If you like, you can write it here, may be nfe team will change something