Become a Patron!

Damn freakshow.

MirkoGradski

Member For 4 Years
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
So I've been using a fraeakshow for about 2 and a half weeks now. It leaks. A lot. For no reason. I can't pin point it. Its either condensation or it has to do with the placement of the air holes because I make sure not to over fill. Anyways, today I noticed juice getting into my threads on my 510 connected to my device. I wiped it out, but I'm more conecerend about juice getting into the device itself. I'm running the thing on a ipv mini 2. Anyone have suggestions? I'm thinking of swapping out the orings to see if that's gonna make a difference because if not I may have to retire the atty. I can't afford to kill a device because juice seeped into its internals.
 

Kkay

Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
I would go on You Tube, and watch some Freakshow builds. You may need to raise your coil, or position it a little differently. (especially around the air hole) I think it is going to leak a little regardless. But if it is leaking a lot, you probably will have to build it a little differently.
 

Rayne

Member For 4 Years
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
You might want to also consider using a heat sink between the RDA and your mod. I use one on my Sigelei, and it keeps my box mod clean. You'll almost always have some leaking, so you might want to consider a heat sink as a sort of spacer. In addition, it will keep your connection between your RDA and box mod cooler; and that's always a bonus.
 

MirkoGradski

Member For 4 Years
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
I saw those and I've been meaning to get one. They're like the Vulcan style ones?
 

Rayne

Member For 4 Years
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Yeah, they're all pretty much the same thing. I bought mine from my work, and it was just a basic Wotofo one; works fine for my needs.
 

Zamazam

Evil Vulcan's do it with Logic
VU Donator
Platinum Contributor
Member For 5 Years
Here's the thing with the freakshow and dripping, you want you wicks not to touch the edges of the air channels because you are creating a migration path for the juice to follow, gravity takes care of the rest. The best solution I have come up with is to make sure their is enough cotton in the build, and kinda paint on the juice over the length of the wicks, not just dumping it in, just enough to saturate with out over saturation. Kicks ass with flavor when you do it that way.
 

ej1024

VU Donator
Diamond Contributor
Member For 4 Years
Raise ur coils, spread ur cotton far from the airflow
BIGBOYVAPER
 

MirkoGradski

Member For 4 Years
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
I'll have to watch Trevor build his up again when I'm off work.
 

VU Sponsors

Top