This EXCEED BOX with EXCEED D22C starter kit was sent to me from Joyetech specifically for the purposes of this review. This will not in any way, cause me to give this mod a favorable review or influence my opinion in any way.
EXCEED BOX Features:
D22C Tank Features:
How it is packaged:
The box has two tiers. It has a foam insert on the top where you will find the mod. Underneath that you will find a box that has your D22 tank, the larger glass for your tank, spare parts and next to that box is the USB cable.
Kit Contents:
Description:
The Joyetech Exceed Box with Exceed D22C, is a compact starter kit for either MTL or DL vapers. It is powered by a 3000mAh battery and you have two operating modes you can choose from. You can set it for direct output or constant voltage output.
The EXCEED BOX comes in Silver, Black, White, Dark Orange, and Black & White.
Operation:
Tank:
It breaks apart very easy, you will have the base, coil, Glass, top ring; fill cap then your drip tip. When using the expansion glass that came with the kit you will need to install the expansion tube that came in the bag of spare parts. All you need to do is screw it on (hand tight) and put your tank back together. The top cap has a child safety feature on it that annoyed me a bit. You will have to push down and unscrew it. It unscrews easy once you push down, if you forget to push down it will just keep spinning.
First Thoughts:
Small and very clean looking. Second was how nice the Silver looked, it is more of brushed silver. I am finding myself a big fan of this shade of silver. When installing the tank it did match nice and I personally liked the size profile when I was running the tank as a 2ml.
Talk about the Mod:
The Exceed box is a single button mod that is simple and easy to use. The 5 bar battery life indicator on top is made into a circle. In the center of that is the Joyeteck logo. There is a light strip around the top. The logo and light strip will either be white or orange depending on your mode choice. Each of the bars equal 20% with 5 bars lit up being full. The USB port is towards the top.
You have two choices for modes to run. Direct Output or Constant voltage. Constant Voltage the mod provides it with a constant amount of voltage, Direct Output will use the available battery voltage.
Talk about the Tank:
The tank included in the kit is the Exceed D22 tank, it is 22mm. It is top fill and has bottom air flow. It can either hold 2 ml of juice or you can switch it to a 3.5ml. The tank will break down into 6 pieces. It breaks apart very easy, you will have the base, coil, Glass, top ring; fill cap then your drip tip. When using the expansion glass that came with the kit you will need to install the expansion tube that came in the bag of spare parts. All you need to do is screw it on (hand tight) and put your tank back together. The top cap has a child safety feature on it that took me a few times to get use too. You will have to push down and unscrew it. It unscrews easy once you push down, if you forget to push down it will just keep spinning. The bottom air flow is able to adjust to a wide open “slot” to a set of pinholes for your airflow. It has a big range when it comes to air flow so it is very capable of running MTL or DL.
Coils
In the kit you will get two coils, one for MTL and the other for DL. One is 0.5ohm gold in color and is for DL; other is 1.2ohm silver in color and is for MTL. I got some good flavor from both these coils. My personal choice was the 0.5ohm it was a warmer vape. The flavor and cloud production for this set up while using the coil for DL vaping is pretty good when you take in account how small this is. Since this tank is set up for MTL or DL you have the option to run the 0.5 and close down your air flow.
Overall
I really like the Exceed box. It is very pocket friendly and you get great battery life with the internal 3000mAh battery. With it being adaptable it will give the new vaper a real chance to succeed and eventually figure out what style of vaping is for them. If you are experienced and are in need a backup mod, a mod to throw in your pocket, or know of a smoker looking to quit. I would suggest give this kit a try. You can’t ask for much more it is dependable and simple to use. I have found myself grabbing this a lot when running out the door.
In no way should this be a deal breaker but the only thing that was missing was 2 AMP charging. This still charges on the quick side, by no means was it slow.
Buy from Links
http://www.myvaporstore.com/Joyetech-Exceed-Box-Starter-Kit-p/joye-exd10.htm
For our friends on the other side of the pond
https://www.joyetech.co.uk/joyetech-exceed-box-e-cig-kit-e-liquid.html
Thanks
Raymond
EXCEED BOX Features:
- Size: 25 x 41 x 67 mm/0.98 x 1.61 x 2.74 in
- Weight: 106.5 g
- Resistance: 0.1-3 ohm
- Max charging current: 1 A
- spring-loaded 510 thread
- Battery capacity: 3000 mAh
- Output mode: direct output/constant voltage output
D22C Tank Features:
- Stainless steel construction
- 510 threading connection
- Diameter: 22mm
- Height: 41.6mm
- E-liquid capacity: 2ml / 3.5ml (with extended vent pipe & spare glass tube)
- Applicable heads: EX series heads
- EX 0.5ohm DL. (Original): rating 20~35W, best at 28W
- EX 1.2ohm MTL. (original): rating 8~14W, best at 12W
How it is packaged:
The box has two tiers. It has a foam insert on the top where you will find the mod. Underneath that you will find a box that has your D22 tank, the larger glass for your tank, spare parts and next to that box is the USB cable.
Kit Contents:
- 1x Exceed Box Mod
- 1x Exceed D22 Atomizer(include mouthpiece)
- 1x Ex 1.2ohm MTL Head
- 1x Ex 0.5ohm Dl Head
- 1x Spare Glass Tube(3.5ml)
- 1x Extended Vent Pipe
- 5x Silicon Ring
- 1x USB Cable
- 1x Warranty Card
- 1x Warning Card
- Spare Parts
Description:
The Joyetech Exceed Box with Exceed D22C, is a compact starter kit for either MTL or DL vapers. It is powered by a 3000mAh battery and you have two operating modes you can choose from. You can set it for direct output or constant voltage output.
The EXCEED BOX comes in Silver, Black, White, Dark Orange, and Black & White.
Operation:
- 5 clicks of the fire button will turn the mod on and off.
- While the mod is on, press the fire button 3 times fast to switch between Direct Output (white light) and Constant Voltage (orange light) mode.
Tank:
It breaks apart very easy, you will have the base, coil, Glass, top ring; fill cap then your drip tip. When using the expansion glass that came with the kit you will need to install the expansion tube that came in the bag of spare parts. All you need to do is screw it on (hand tight) and put your tank back together. The top cap has a child safety feature on it that annoyed me a bit. You will have to push down and unscrew it. It unscrews easy once you push down, if you forget to push down it will just keep spinning.
First Thoughts:
Small and very clean looking. Second was how nice the Silver looked, it is more of brushed silver. I am finding myself a big fan of this shade of silver. When installing the tank it did match nice and I personally liked the size profile when I was running the tank as a 2ml.
Talk about the Mod:
The Exceed box is a single button mod that is simple and easy to use. The 5 bar battery life indicator on top is made into a circle. In the center of that is the Joyeteck logo. There is a light strip around the top. The logo and light strip will either be white or orange depending on your mode choice. Each of the bars equal 20% with 5 bars lit up being full. The USB port is towards the top.
You have two choices for modes to run. Direct Output or Constant voltage. Constant Voltage the mod provides it with a constant amount of voltage, Direct Output will use the available battery voltage.
Talk about the Tank:
The tank included in the kit is the Exceed D22 tank, it is 22mm. It is top fill and has bottom air flow. It can either hold 2 ml of juice or you can switch it to a 3.5ml. The tank will break down into 6 pieces. It breaks apart very easy, you will have the base, coil, Glass, top ring; fill cap then your drip tip. When using the expansion glass that came with the kit you will need to install the expansion tube that came in the bag of spare parts. All you need to do is screw it on (hand tight) and put your tank back together. The top cap has a child safety feature on it that took me a few times to get use too. You will have to push down and unscrew it. It unscrews easy once you push down, if you forget to push down it will just keep spinning. The bottom air flow is able to adjust to a wide open “slot” to a set of pinholes for your airflow. It has a big range when it comes to air flow so it is very capable of running MTL or DL.
Coils
In the kit you will get two coils, one for MTL and the other for DL. One is 0.5ohm gold in color and is for DL; other is 1.2ohm silver in color and is for MTL. I got some good flavor from both these coils. My personal choice was the 0.5ohm it was a warmer vape. The flavor and cloud production for this set up while using the coil for DL vaping is pretty good when you take in account how small this is. Since this tank is set up for MTL or DL you have the option to run the 0.5 and close down your air flow.
Overall
I really like the Exceed box. It is very pocket friendly and you get great battery life with the internal 3000mAh battery. With it being adaptable it will give the new vaper a real chance to succeed and eventually figure out what style of vaping is for them. If you are experienced and are in need a backup mod, a mod to throw in your pocket, or know of a smoker looking to quit. I would suggest give this kit a try. You can’t ask for much more it is dependable and simple to use. I have found myself grabbing this a lot when running out the door.
In no way should this be a deal breaker but the only thing that was missing was 2 AMP charging. This still charges on the quick side, by no means was it slow.
Buy from Links
http://www.myvaporstore.com/Joyetech-Exceed-Box-Starter-Kit-p/joye-exd10.htm
For our friends on the other side of the pond
https://www.joyetech.co.uk/joyetech-exceed-box-e-cig-kit-e-liquid.html
Thanks
Raymond