Fell in Love With this Mod

[Daniel]

http://focalecig.com/Product/Wolf-StyleMechanical-Mod-19883

Can I ask some of you to go look at this mod & give me your honest opinion? I had never been to this site b4, and while I was browsing, I ran across this mod. Now I am a fanatic about dogs, or wolves, anything canine, I friggin' love, & this one has an engraved wolf head on it, with the Chinese word Wolf engraved with it.

I am SERIOUSLY leaning on grabbing this mod, but I want to be sure everything about it is good, and I'm not just buying a fancy engraving. I'm trying to pay attention to certain aspects of mech mods now, like the contact points and buttons being silver plated, and all, but dayummmm, this mod has me shaking like jelly....lmao. Being silly I know, but hey, I'm amped up about good looking mods, & if everything is good with this one, those folks are liable to get alot , ALOT of my money...hehehehe

Thanks guys, I REALLY appreciate you all!!! It's always a great enjoyment to read the different posts and comments, I'm always looking forward to getting on the VU everyday. Ok, I'll shut up for now, gonna go make an account at Focalcig for now, & gaze at my possible new mech for a bit...hehehe

 

[State O' Flux]

These are pretty much a Stingray clone in design, with different metal finish and logo. FT has the same mod, but with a direct connect instead of the floating 510 pin. JACCM... "just another China clone mech". If you like it, it can't be any better or worse than any other recent China clone.

 

[Nikkita6]

http://focalecig.com/Product/Wolf-StyleMechanical-Mod-19883

Can I ask some of you to go look at this mod & give me your honest opinion? I had never been to this site b4, and while I was browsing, I ran across this mod. Now I am a fanatic about dogs, or wolves, anything canine, I friggin' love, & this one has an engraved wolf head on it, with the Chinese word Wolf engraved with it.

I am SERIOUSLY leaning on grabbing this mod, but I want to be sure everything about it is good, and I'm not just buying a fancy engraving. I'm trying to pay attention to certain aspects of mech mods now, like the contact points and buttons being silver plated, and all, but dayummmm, this mod has me shaking like jelly....lmao. Being silly I know, but hey, I'm amped up about good looking mods, & if everything is good with this one, those folks are liable to get alot , ALOT of my money...hehehehe

Thanks guys, I REALLY appreciate you all!!! It's always a great enjoyment to read the different posts and comments, I'm always looking forward to getting on the VU everyday. Ok, I'll shut up for now, gonna go make an account at Focalcig for now, & gaze at my possible new mech for a bit...hehehe

While I have a lot of experience with Focalecig.com as a vendor, I have nothing to add about this particular clone, other than what was said above, it looks like a Stingray with a different logo, which is not a bad thing.

Focal is a reputable vendor, so if you like it, buy it. I doubt you will find much feedback on this specific item because it is not a popular one, which doesn't mean that it isn't a good one. But there is only one way to find out.

 

[Daniel]

I kinda figured it wasn't a mass acquired item, it doesn't have any ratings, but I was just wondering about the attributes of the mech, are the contact points acceptable, or are they less than desired, so you're right, only one way to find out. I think I'm gonna go ahead and buy it. Nikkita, what was the average travel time when you purchased something from them? Was it decent, or had you forgotten about it before it came? While I don't mind a couple of weeks, I'd just hate to have to wait a couple of months, ya know? Thanks for everyone's response, I'll make a final decision this evening, and go for it most likely.....

 

[Daniel]

Well,...I bought the Wolf head mod, plus a matching glass & gold drip tip. Total cost to me----> $25.88. Not too bad, if it all goes well, which I'm praying it does. It comes with free shipping, with a determined time to me of 10-14 days. So, everything I have now, mod wise is telescoping, & the Wolf head mod is not, it will have 3 different tubes for the perspective batteries, so that will be different. And after comparing it and an actual Stingray side by side, there is no difference, only the logo, so I feel like I am getting a Stingray, just a different design on the outside.

Ok, thanks for all of the replies, gonna go rest a bit before Mod Envy comes on tonight, & hoping I can stay awake for all of it...lol. Everyone take care..

 

[The Ocelot]

One problem I have read about with the Stingray and it looks like it could happen with the one too: Sometimes the bottom screw on tanks get caught in the mod's airflow channels and people have a hard time getting them out.

 

[Nikkita6]

I kinda figured it wasn't a mass acquired item, it doesn't have any ratings, but I was just wondering about the attributes of the mech, are the contact points acceptable, or are they less than desired, so you're right, only one way to find out. I think I'm gonna go ahead and buy it. Nikkita, what was the average travel time when you purchased something from them? Was it decent, or had you forgotten about it before it came? While I don't mind a couple of weeks, I'd just hate to have to wait a couple of months, ya know? Thanks for everyone's response, I'll make a final decision this evening, and go for it most likely.....

The average wait time from FC is 12-15 days total barring any restocking issues, or postal delays. Out of approx 10 orders, all but one arrived within 10-12 days of my order. I had one that took 26 days, but that was the exception, not at all the norm .. but it can happen.

Orders usually ship within 3 business days (doesn't include weekends) although some can take longer. There are some items that ship within 24-48hours, and this is usually indicated on the product page. I hope you receive your order quickly, and that you love your new mod set.

 

[Nikkita6]

One problem I have read about with the Stingray and it looks like it could happen with the one too: Sometimes the bottom screw on tanks get caught in the mod's airflow channels and people have a hard time getting them out.

I have heard of this happening also with KFL's and the air adjustment screw that is located on the bottom. I have three Stingray mods, including the new X and it has yet to happen to me.

 

[The Ocelot]

I have heard of this happening also with KFL's and the air adjustment screw that is located on the bottom. I have three Stingray mods, including the new X and it has yet to happen to me.

Don't say yet! I hope it doesn't happen to you. I read of a couple of people who got frustrated and ended up scratching their Stingrays trying to get it off. Some were KFLs that got stuck, but it could happen with any device that has an air hole or fill screw on the bottom.

 

[Nikkita6]

Don't say yet! I hope it doesn't happen to you. I read of a couple of people who got frustrated and ended up scratching their Stingrays trying to get it off. Some were KFLs that got stuck, but it could happen with any device that has an air hole or fill screw on the bottom.

LOL .. Ok I won't say that

 

[ghost62]

I had my eye on this one too so let me know what you think of it when it comes.
My only concern was the build quality- threads look a little rough...