Compatible with 21700 battery, but still works with 18650 battery as well. It comes with the battery sleeve. My sample came with a 21700 battery as well. It is A 10th anniversary limited edition, and it is an elegant well thought out piece of gear. . The ESPION Solo reaches 80W power along with a sequence of unique features.
First the look. It is an elegant little device but what stood out is the size. This mod is small. Very small. Evic mini size. But it packs a 21700 battery. Wowza. Then there is the touchscreen. The screen is large, readable and the mod has a function button. Navigating the screen was a pleasure. It has a full suite of features - ramp up, clock, tar, tc - everything you need.
Function is key to a mod. This functions flawlessly. With a 4000mAh high drain 21700 battery, you can vape most of the day. Still, you can use the normal 18650 battery with the help of a special sleeve (includes in the kit). My kit as I said came with the 21700 battery included. I found the TC worked well - typical joytech chip. I played a bit with the TCR to get my SS just right for me. It is not a DNA - let’s not pretend it is. But it hit pretty quick, I could ramp it up and it worked well. I don’t use TC that much though. in power mode I felt no discernible lag at all.
Here is what I really liked. You can lock the screen by clicking the function button to avoid any touch by mistake. Also, the screen will be locked automatically each time when you click the fire button. Click the function button once to unlock. You can turn the screen on/off by clicking the function button 2 times in quick succession. This is a great feature for touch screens and I wish it was adopted universally
Standard Configuration:
1 * ESPION Solo
1 * AVB 21700 battery (optional)
1 * 18650 battery sleeve
1 * QC USB cable
1 * Manual
1 * Warranty card
1* Procore X atomizer
Specification:
Mod size: 25.5mm(L)*39.5mm(W)*81.0mm(H)
Screen type: 1.3 inch OLED touchscreen
Screen size: 64*128 px
Output wattage: 1-80W
Output mode: Power/RTC/Bypass/TC(Ni, Ti, SS316)/TCR modes
Resistance range: 0.05-1.5ohm for TC/TCR mode
Resistance range: 0.1-3.5ohm for Power mode
Temperature range: 100-315°C/ 200-600°F
Cell using: single replaceable high rate 21700/18650 cell (CDR25A)
Max charging current: 2A
Max output current: 30A
Max output voltage: 9V
Well my kit came with the Procore X atomizer. I have discussed this atomizer previously. It has a .4 ohm head. It is a flip type top-fill system and very convenient to use. I’ve had no leaking issues. You can get coils capable of direct lung or mouth to lung, from big vapor production to optimal flavor. It is not a bad atomizer at all. Stock you have the smaller tank but the kit has the extender - which you will need if vaping DL.
Standard Configuration:
1 * ProCore X atomizer
1 * ProC1 (0.4ohm) head
1 * ProC1-S (0.25ohm) head
1 * Spare glass tube(4.5 ml)
1 * Extended vent pipe
1* Manual
1 * Warranty card
1* Warning card
So final thoughts … I just got a Asmodus Colussus for review. I ;loved the size. I put my O-genny on top and was quite happy. I l;ike this mod better. This just delivers in every category for me. Size, function, touch screen. It is a lovely little device.
Now the device is not cheap. The kit runs around 70 US. Also to note for you MTL vapers - it will adjust in .1 increments. Is it too much for what you get? You decide. I would pay for it. I have similar sm,all 80 watt devices that cost as much or more.
First the look. It is an elegant little device but what stood out is the size. This mod is small. Very small. Evic mini size. But it packs a 21700 battery. Wowza. Then there is the touchscreen. The screen is large, readable and the mod has a function button. Navigating the screen was a pleasure. It has a full suite of features - ramp up, clock, tar, tc - everything you need.
Function is key to a mod. This functions flawlessly. With a 4000mAh high drain 21700 battery, you can vape most of the day. Still, you can use the normal 18650 battery with the help of a special sleeve (includes in the kit). My kit as I said came with the 21700 battery included. I found the TC worked well - typical joytech chip. I played a bit with the TCR to get my SS just right for me. It is not a DNA - let’s not pretend it is. But it hit pretty quick, I could ramp it up and it worked well. I don’t use TC that much though. in power mode I felt no discernible lag at all.
Here is what I really liked. You can lock the screen by clicking the function button to avoid any touch by mistake. Also, the screen will be locked automatically each time when you click the fire button. Click the function button once to unlock. You can turn the screen on/off by clicking the function button 2 times in quick succession. This is a great feature for touch screens and I wish it was adopted universally
Standard Configuration:
1 * ESPION Solo
1 * AVB 21700 battery (optional)
1 * 18650 battery sleeve
1 * QC USB cable
1 * Manual
1 * Warranty card
1* Procore X atomizer
Specification:
Mod size: 25.5mm(L)*39.5mm(W)*81.0mm(H)
Screen type: 1.3 inch OLED touchscreen
Screen size: 64*128 px
Output wattage: 1-80W
Output mode: Power/RTC/Bypass/TC(Ni, Ti, SS316)/TCR modes
Resistance range: 0.05-1.5ohm for TC/TCR mode
Resistance range: 0.1-3.5ohm for Power mode
Temperature range: 100-315°C/ 200-600°F
Cell using: single replaceable high rate 21700/18650 cell (CDR25A)
Max charging current: 2A
Max output current: 30A
Max output voltage: 9V
Well my kit came with the Procore X atomizer. I have discussed this atomizer previously. It has a .4 ohm head. It is a flip type top-fill system and very convenient to use. I’ve had no leaking issues. You can get coils capable of direct lung or mouth to lung, from big vapor production to optimal flavor. It is not a bad atomizer at all. Stock you have the smaller tank but the kit has the extender - which you will need if vaping DL.
Standard Configuration:
1 * ProCore X atomizer
1 * ProC1 (0.4ohm) head
1 * ProC1-S (0.25ohm) head
1 * Spare glass tube(4.5 ml)
1 * Extended vent pipe
1* Manual
1 * Warranty card
1* Warning card
So final thoughts … I just got a Asmodus Colussus for review. I ;loved the size. I put my O-genny on top and was quite happy. I l;ike this mod better. This just delivers in every category for me. Size, function, touch screen. It is a lovely little device.
Now the device is not cheap. The kit runs around 70 US. Also to note for you MTL vapers - it will adjust in .1 increments. Is it too much for what you get? You decide. I would pay for it. I have similar sm,all 80 watt devices that cost as much or more.
Last edited: