Fishbone rda

[cheeney]

Hey guys just ordered the fishbone rda last night ik some have reviews and I've read and watched a lot of them but I'd thought I'd bring the discussion here. What are your questions comments concerns

Sent from my SM-G900R4 using Tapatalk

 

[cheeney]

Also I'm running the 150w sigeli tc

Sent from my SM-G900R4 using Tapatalk

 

[TogaJon]

Nice little rda. I find it produces a warm thick vapour with a standard dual 0.45ohm build at around 55watts.

The only big issue I have with rda is the bottom airflow. As you build your coils directly above 2 large holes on each side of the deck, you need to be precise when reloading with juice or else it drips into these holes, out the bottom of the rda and all over your mod.
This also reduces the deck space so I feel like I am dripping far more often than with other rda I own.

With that said, I am actually using it today on my xcube2 and even with the airhole issue I still rate it. It's in my top 3 rda that I own behind the velocity and troll.

 

[cheeney]

Nice little rda. I find it produces a warm thick vapour with a standard dual 0.45ohm build at around 55watts.

The only big issue I have with rda is the bottom airflow. As you build your coils directly above 2 large holes on each side of the deck, you need to be precise when reloading with juice or else it drips into these holes, out the bottom of the rda and all over your mod.
This also reduces the deck space so I feel like I am dripping far more often than with other rda I own.

With that said, I am actually using it today on my xcube2 and even with the airhole issue I still rate it. It's in my top 3 rda that I own behind the velocity and troll.

I don't have either of those rda I have the mad hatter and the derringer both dual parallel kamthal at .18 builds I'm curious to see how it will compare to those. I see that it's deck is going to be a bit janky to build on but ya I'm suppose to be getting some 24 gauge nickel wire this week as well so I'm thinking a 6 or 7 wrap dual parallel, never built or ran temp control on my sigelei that's going to be another feat lol

Sent from my SM-G900R4 using Tapatalk

 

[Jah]

I don't have either of those rda I have the mad hatter and the derringer both dual parallel kamthal at .18 builds I'm curious to see how it will compare to those. I see that it's deck is going to be a bit janky to build on but ya I'm suppose to be getting some 24 gauge nickel wire this week as well so I'm thinking a 6 or 7 wrap dual parallel, never built or ran temp control on my sigelei that's going to be another feat lol

Sent from my SM-G900R4 using Tapatalk

you wont be able to fire a dual parallel nickel 24 gauge. the resistance would be waaaaay too low. in fact, you will be pushing it getting a single coil 24 gauge ni200 build going at high enough resistance