Ben28
Member For 1 Year
GeekVape S100 Kit
Today I bring you a special kit. In this case we have the S100 (Aegis Solo 2) in combination with an RDA that is currently discontinued, the Z RDA. It is a device that works with a single 18650 and the RDA, it promises to give a very good flavor when vaping. Anyway, later we will check if that is as indicated.
Thanks to Sue from Healthcabin for making this review possible. You can visit her page and get more information about the S100 Kit.
Thanks to Sue from Healthcabin for making this review possible. You can visit her page and get more information about the S100 Kit.
Features
- 1. Industry-leading IP68 rating water & dust resistance
- 2. Ground-breaking shock-resistance
- 3. External 18650 battery
- 4. 1.08 inch full screen display
- 5. Type-c charging port with flip cover
- 6. A-lock design provides accidental press protection
| Brand | GeekVape |
| Product Name | S100 Aegis Solo 2 Mod |
| Battery | External 18650 single battery |
| Wattage | 100W max |
| Output Voltage | 8.5V (maximum) |
| Charging Specification | Type-C, 5V/2A |
| Low Voltage Warning | 3.3V±0.1V |
| PCBA Temperature Alarm | 85℃ |
| Longest Vaping Time | 10s |
| Working Temperature | ﹣10~40℃ |
| Standby Current | ＜10 uA |
| Storage Temperature | ﹣20℃~60℃ |
| Relative Humidity | 10% RH~70% RH |
| Color | Silver, Grey, Classic Black, Navy Blue, Red, Rainbow, Pink Gold, Mint Green, Rainbow Purple, Blue Red, Red White |
Packaging
The product comes in a fairly elongated rectangular box combining colors such as black, orange and white. Orange being the most typical color used by GeekVape in its packaging.
In the upper area we find the brand and its own logo. In the center we are presented with the device itself in an image that is consistent with what we have purchased.
Below it we are shown the model of the product and the color, in this case Red Black.
In the area behind the box we find a wide list of features in combination with the contents of the box, some contact addresses, a barcode, a scratch to verify the veracity of the product and some logos that are at the bottom .
In the box
1* S100 Mod
1*Z RDA
2*810 Drip Tip
1* T-Shaped Tool
1* Winding Coil Rod
1* Spare Parts Pack
4* Feather Cotton
4* Clapton Coils
1*USB Cable
In the upper area we find the brand and its own logo. In the center we are presented with the device itself in an image that is consistent with what we have purchased.
Below it we are shown the model of the product and the color, in this case Red Black.
In the area behind the box we find a wide list of features in combination with the contents of the box, some contact addresses, a barcode, a scratch to verify the veracity of the product and some logos that are at the bottom .
In the box
1* S100 Mod
1*Z RDA
2*810 Drip Tip
1* T-Shaped Tool
1* Winding Coil Rod
1* Spare Parts Pack
4* Feather Cotton
4* Clapton Coils
1*USB Cable
Once we slide the decorative cardboard, the first thing we will find will be the mod itself. Afterwards we can access a double bottom where the atomizer and all the other pieces that are included in the packaging will be.
Because of this, the box is quite voluminous since it has a lot of content.
Because of this, the box is quite voluminous since it has a lot of content.
Device Inspection
The front of the product is quite attractive and has very square shapes. At the top we find a small silicone cover that will give rise to a Type-C charging port, in any case it is not recommended to use it, but rather use a separate charger.
We continue down this area and find the fire button. This has a somewhat domed shape and makes it very comfortable to press. In the center would be the screen that we will discuss later.
At the bottom we find the power up and down buttons, which have a very good touch and are precise with little travel.
Here are the main functions;
Let's talk about functions, by giving 3 Clicks to the fire button we will enter the adjustment mode and we will move with the fire button. In this way we can choose between vaping modes with the + and -. Additionally, if we move to the puff counter and press + or - we will restart it.
If in the adjustment mode we press the + and - simultaneously, we will lock these buttons, to unlock them it is the same process as to lock them. If we hold these same buttons for 1 second the color of the interface will change.
If in the normal interface we press the fire button and the + or - button we can adjust the brightness of the screen.
To exit adjustment mode we will have to hold down the fire button.
Let's talk about vaping modes;
Power - It is the traditional wattage mode of all devices.
Bypass - This gives us the wattage depending on our batteries and their remaining charge, it is like a mech mod but with electronics, much safer
VPC - This will allow us to adjust the wattage in one second intervals. That is, we can start the puff with 50 watts and in the next second raise it to 55W.
Temperature - I don't entirely know how this mode works but we can control the temperature of our coil depending on whether we want a colder or warmer vape.
On the screen (1.08 inch TFT display) we will always be shown very similar information;
- Vaping mode
- Remaining battery depending on slots
- Wattage
- Ω indicator
- Voltage/Amperage Indicator (depends on mode)
- Puff/puff duration indicator.
We continue down this area and find the fire button. This has a somewhat domed shape and makes it very comfortable to press. In the center would be the screen that we will discuss later.
At the bottom we find the power up and down buttons, which have a very good touch and are precise with little travel.
Here are the main functions;
Let's talk about functions, by giving 3 Clicks to the fire button we will enter the adjustment mode and we will move with the fire button. In this way we can choose between vaping modes with the + and -. Additionally, if we move to the puff counter and press + or - we will restart it.
If in the adjustment mode we press the + and - simultaneously, we will lock these buttons, to unlock them it is the same process as to lock them. If we hold these same buttons for 1 second the color of the interface will change.
If in the normal interface we press the fire button and the + or - button we can adjust the brightness of the screen.
To exit adjustment mode we will have to hold down the fire button.
Let's talk about vaping modes;
Power - It is the traditional wattage mode of all devices.
Bypass - This gives us the wattage depending on our batteries and their remaining charge, it is like a mech mod but with electronics, much safer
VPC - This will allow us to adjust the wattage in one second intervals. That is, we can start the puff with 50 watts and in the next second raise it to 55W.
Temperature - I don't entirely know how this mode works but we can control the temperature of our coil depending on whether we want a colder or warmer vape.
On the screen (1.08 inch TFT display) we will always be shown very similar information;
- Vaping mode
- Remaining battery depending on slots
- Wattage
- Ω indicator
- Voltage/Amperage Indicator (depends on mode)
- Puff/puff duration indicator.
This is the side of the S100. As you can see, it has very geometric and regular shapes, with quite a few angles. In the rear area we find a C-shaped construction completely made of leather or synthetic leather.
The curious thing about this area is that small slide that we found there. That will serve to block the fire button. Something similar to what the Vaporesso Armor Max has. It is the same operation, we slide and lock the fire button. Quite useful for when we want to put the device in our pocket for example.
At the top of the mod we will find the 510 thread that will be covered by a small plate held with 3 screws. Many users have complained that this lid has become loose over time. Anyway, if that happens I'll come back here to leave a comment and a photo of it.
The curious thing about this area is that small slide that we found there. That will serve to block the fire button. Something similar to what the Vaporesso Armor Max has. It is the same operation, we slide and lock the fire button. Quite useful for when we want to put the device in our pocket for example.
At the top of the mod we will find the 510 thread that will be covered by a small plate held with 3 screws. Many users have complained that this lid has become loose over time. Anyway, if that happens I'll come back here to leave a comment and a photo of it.
In this area of the device, specifically the area below, we are presented with the battery compartment. To open it we will have to unscrew this cover, insert the battery with the positive pole facing in and close it again.
These lids do not give me complete confidence since they are quite prone to losing strength or breaking directly, but at the time of the review, everything worked correctly.
These lids do not give me complete confidence since they are quite prone to losing strength or breaking directly, but at the time of the review, everything worked correctly.
This is what the RDA looks like from the outside. It is about 25mm which makes it look like the device itself, which I don't like at all, they could have chosen an RDA that fit the size.
In any case, I find it a very attractive RDA that has a very peculiar shape. It becomes flatter until the mouthpiece arrives, something like a bell. In the upper area we find the airflow ring that is adjustable. It has no stop, so it will rotate infinitely if we want. It is made up of two entrances, one at the front and one at the back. The only drawback I can give it is that it whistles a lot when we take a puff, especially with the entrance completely open.
On both sides we also find a small decoration engraved on the atomizer itself.
In any case, I find it a very attractive RDA that has a very peculiar shape. It becomes flatter until the mouthpiece arrives, something like a bell. In the upper area we find the airflow ring that is adjustable. It has no stop, so it will rotate infinitely if we want. It is made up of two entrances, one at the front and one at the back. The only drawback I can give it is that it whistles a lot when we take a puff, especially with the entrance completely open.
On both sides we also find a small decoration engraved on the atomizer itself.