Hi Vaping Underground members, In this review i take a look at the Zeus Nano Tank from Geekvape. The Zeus Nano Tank was supplied for the purpose of this review by Geekvape.
https://www.geekvape.com/kits/zeus/zeus-nano.html
Introduction
Geekvape in the last 3 years have become best known for their Zeus atomizers and Aegis devices and here we have them meet in the form of coil cross compatibility. The Zeus Nano Tank borrows it's top to bottom airflow system from it's bigger brother the Zeus Sub-ohm tank just on a smaller scale offering a more restrictive vape for lower wattage RDL or loose MTL dependant on airflow setting and installed coil head. The coils get press fitted into the chamber and the top to bottom airflow offers a leak resistant solution.
The Zeus Nano Tank accommodates the G Boost B-series coil heads that are used by the Aegis boost and this cross compatibility of coil heads is something that's both welcomed and we should see more of. Coming in 6 different colour options and with familiar Zeus aesthetics let's give the 22mm in diameter new member of the Zeus family a closer look!
___________________________________________________________________
In The Box
Contents:
1 x Zeus Nano Tank (2ml)(Pre-installed: Geekvape B Series Coil 0.4ohm,25~33W)
1 x Geekvape B Series Coil 0.6ohm,15~25W
1 x Drip tip
1 x Coil tool
1 x User manual
1 x Spare parts pack
1 x Spare glass tube (3.5ml)
___________________________________________________________________
Aesthetics
The Zeus Nano Tank came in cardboard box sample packaging so the retail packaging will differ. I received the Rainbow colour version, the options are Silver, Gunmetal, Blue, Black, Gold or Rainbow.
The build quality and overall look is the same as we have seen with previous Zeus family members with the Nano at 22mm being the most slender of the siblings which also gives it a taller look.
Up top we have a Black 510 Delrin drip tip then a top-cap that tapers and has spaced indented grooves for a good grip. The base section has the same indented grooves and is 22mm at the very base and then it tapers outwards then back inwards making the straight glass approximately 23mm wide. Below the top-cap we have the airflow control ring with short dual airflow slots and "ZEUS" carved into the metal. Looking through the glass at the visible chamber we can see cut-out sections either side that line up with the coils wicking ports and the familiar Zeus logo on both the front and back. Moving to the base we have a Gold plated 510 pin, branding and safety marks!
___________________________________________________________________
Zeus Nano Specs and Features:
Diameter: 22mm
Height: 56.55mm
Tank Capacity: 2ml
Filling Method: Top filling
Airflow: Top to Bottom Airflow Control
Drip Tip Type: 510 Drip Tip
Resistance: 0.6ohm KA1 Mesh Coil - Rated 15-25W;
0.4ohm KA1 Mesh Coil - Rated 25-33W
GV Boost Formula G Coil/B Series Coil
Material: Stainless Steel+Pyrex Glass
The Most Reliable Leakproof tank
Quick-change prebuilt coil system
Thread: 510
Colours: Silver, Gunmetal, Blue, Black, Gold, Rainbow
___________________________________________________________________
What You Receive?
As well as the Zeus Nano Tank with 2ml straight glass you also receive a 3.5ml bubble glass and full set of spare O-rings. You also get one of the boost coil spanners for help with coil removal although i have never found the need to ever use it whichever kit it has been supplied with. Also included are 2 different G-Boost B-Series coil heads, and finally a spare (identical) 510 drip tip.
___________________________________________________________________
It's Various Parts
Up top we have a plain Delrin 510 with a bore suited to a restricted direct lung or loose MTL draw and the spare is identical, at least the spare i received is. We then have the top cap with bayonet fitting that secures to the juice port plate which has attached the double chamber with incorporated airflow system.
On the top of the Chamber and juice port plate section we have an airflow control ring that can be easily removed for cleaning purposes and the glass tube whether it be the pre-installed straight glass or included bubble glass secures really well over an O-ring below the airflow slots and above the chamber. The coil head gets press fitted into the chamber and base section with 510 thread screws on to complete the tank!
___________________________________________________________________
Fitting The Coil Head
The Zeus Nano Tank takes the same Boost coils that fit both the Boost and Boost Plus and you receive both the 0.6ohm and 0.4ohm kanthal mesh coils, the 0.4ohm is rated between 25w and 33w and the 0.6ohm rated between 15w and 25w.
As mentioned the coil head just gets press fitted into the chamber, make sure that the wicking ports line up with the cut-out ports on the chamber so it wicks correctly, then simply screw the tanks base on and you are ready to fill!
___________________________________________________________________
Filling
As mentioned the top-cap has the same bayonet fitting as the other Zeus family members which let's face it who doesn't prefer this method rather than more time consuming threading? So just a quarter turn, if that and the top-cap is off revealing 2 quite narrow kidney shaped juice ports. Although the ports are quite narrow they are within a deep channel so the e-liquid will find it's way into the ports if using bigger nozzles just a little more time consuming but standard gorilla nozzles are fine.
Once filled again it's just the slightest of turns and the top-cap is secured and you are good to go!
___________________________________________________________________
Review Continued Below:
https://www.geekvape.com/kits/zeus/zeus-nano.html
Introduction
Geekvape in the last 3 years have become best known for their Zeus atomizers and Aegis devices and here we have them meet in the form of coil cross compatibility. The Zeus Nano Tank borrows it's top to bottom airflow system from it's bigger brother the Zeus Sub-ohm tank just on a smaller scale offering a more restrictive vape for lower wattage RDL or loose MTL dependant on airflow setting and installed coil head. The coils get press fitted into the chamber and the top to bottom airflow offers a leak resistant solution.
The Zeus Nano Tank accommodates the G Boost B-series coil heads that are used by the Aegis boost and this cross compatibility of coil heads is something that's both welcomed and we should see more of. Coming in 6 different colour options and with familiar Zeus aesthetics let's give the 22mm in diameter new member of the Zeus family a closer look!
___________________________________________________________________
In The Box
Contents:
1 x Zeus Nano Tank (2ml)(Pre-installed: Geekvape B Series Coil 0.4ohm,25~33W)
1 x Geekvape B Series Coil 0.6ohm,15~25W
1 x Drip tip
1 x Coil tool
1 x User manual
1 x Spare parts pack
1 x Spare glass tube (3.5ml)
___________________________________________________________________
Aesthetics
The Zeus Nano Tank came in cardboard box sample packaging so the retail packaging will differ. I received the Rainbow colour version, the options are Silver, Gunmetal, Blue, Black, Gold or Rainbow.
The build quality and overall look is the same as we have seen with previous Zeus family members with the Nano at 22mm being the most slender of the siblings which also gives it a taller look.
Up top we have a Black 510 Delrin drip tip then a top-cap that tapers and has spaced indented grooves for a good grip. The base section has the same indented grooves and is 22mm at the very base and then it tapers outwards then back inwards making the straight glass approximately 23mm wide. Below the top-cap we have the airflow control ring with short dual airflow slots and "ZEUS" carved into the metal. Looking through the glass at the visible chamber we can see cut-out sections either side that line up with the coils wicking ports and the familiar Zeus logo on both the front and back. Moving to the base we have a Gold plated 510 pin, branding and safety marks!
___________________________________________________________________
Zeus Nano Specs and Features:
Diameter: 22mm
Height: 56.55mm
Tank Capacity: 2ml
Filling Method: Top filling
Airflow: Top to Bottom Airflow Control
Drip Tip Type: 510 Drip Tip
Resistance: 0.6ohm KA1 Mesh Coil - Rated 15-25W;
0.4ohm KA1 Mesh Coil - Rated 25-33W
GV Boost Formula G Coil/B Series Coil
Material: Stainless Steel+Pyrex Glass
The Most Reliable Leakproof tank
Quick-change prebuilt coil system
Thread: 510
Colours: Silver, Gunmetal, Blue, Black, Gold, Rainbow
___________________________________________________________________
What You Receive?
As well as the Zeus Nano Tank with 2ml straight glass you also receive a 3.5ml bubble glass and full set of spare O-rings. You also get one of the boost coil spanners for help with coil removal although i have never found the need to ever use it whichever kit it has been supplied with. Also included are 2 different G-Boost B-Series coil heads, and finally a spare (identical) 510 drip tip.
___________________________________________________________________
It's Various Parts
Up top we have a plain Delrin 510 with a bore suited to a restricted direct lung or loose MTL draw and the spare is identical, at least the spare i received is. We then have the top cap with bayonet fitting that secures to the juice port plate which has attached the double chamber with incorporated airflow system.
On the top of the Chamber and juice port plate section we have an airflow control ring that can be easily removed for cleaning purposes and the glass tube whether it be the pre-installed straight glass or included bubble glass secures really well over an O-ring below the airflow slots and above the chamber. The coil head gets press fitted into the chamber and base section with 510 thread screws on to complete the tank!
___________________________________________________________________
Fitting The Coil Head
The Zeus Nano Tank takes the same Boost coils that fit both the Boost and Boost Plus and you receive both the 0.6ohm and 0.4ohm kanthal mesh coils, the 0.4ohm is rated between 25w and 33w and the 0.6ohm rated between 15w and 25w.
As mentioned the coil head just gets press fitted into the chamber, make sure that the wicking ports line up with the cut-out ports on the chamber so it wicks correctly, then simply screw the tanks base on and you are ready to fill!
___________________________________________________________________
Filling
As mentioned the top-cap has the same bayonet fitting as the other Zeus family members which let's face it who doesn't prefer this method rather than more time consuming threading? So just a quarter turn, if that and the top-cap is off revealing 2 quite narrow kidney shaped juice ports. Although the ports are quite narrow they are within a deep channel so the e-liquid will find it's way into the ports if using bigger nozzles just a little more time consuming but standard gorilla nozzles are fine.
Once filled again it's just the slightest of turns and the top-cap is secured and you are good to go!
___________________________________________________________________
Review Continued Below:
