HCigar DNA40 (not a clone) ... $103.99

[moecat]

http://www.vaportekusa.com/hcigar-dna-40-with-heartbeat-by-evolv-chip-not-a-clone/

Product Description
Features:

EVOLV DNA 40 Temperature Sensing

Power (Wattage) Lock

Screen Flip

Stealth Mode

Auto Resistance Check

Variable Wattage 1 - 40 Watts (0.1 increments)

USB Charging (Operates as a Passthrough)

Spring loaded copper center pin

Stainless Steel Threads

Battery step-down function

Auto resistance identification

Magnet back cover

Accepts a single 18650 (not included)

Protection:

Short Circuit

Over Discharge

5 Click Lock/Unlock

Low Resistance


Output Power: 1 to 40 Watts

Output Voltage: 1 to 9 Volts

Output Current: Max 16.0 Amps

Atomizer Resistance (Standard Wire): 0.16 Ohms to 2.0 Ohms. Typical: 0.7 Ohms

Atomizer Resistance (Temperature Sensing, Cold): 0.10 Ohms to 1.0 Ohms. Typical: 0.4 Ohms

Temperature Limit: 200F to 600F

Input Voltage: 3.1 Volts to 4.3 Volts

Input Current: 0.5 Amps to 16.0 Amps. Typical: 8.0 Amps

Dimensions Approx: L90mm x H50mm x W23mm

Connection: 510

Material: Aluminum

Color: Black

Includes:

1 HB DNA 40 Watt Mod

1 USB Cable Retractable

1 Acrylic Box Packaging and User Guide

 

[Panther1911]

they probably would have been better off using a clone lol

the clone dna40 chip seem to have less problems than authentic evolvs

 

[VapedCrusader]

Yea exactly - I wouldn't be in a rush to buy this thing..

 

[moecat]

As soon as I posted, I did see this ... http://vapingunderground.com/threads/evolv-llc-are-you-reading-this-if-you-do-fuck-you.57802/

 

[hazozita]

Be prepared to do a little work on the wiring. The DNA 40 chip is fine, but the way it is wired is not to spec. It's mentioned in Todd's review, and there's a lot of info (including wiring diagrams) in the ECF thread he references.

 

[SMOKIE]

Product Description
Features:

EVOLV DNA 40 Temperature Sensing

Power (Wattage) Lock

Screen Flip

Stealth Mode

Auto Resistance Check

Variable Wattage 1 - 40 Watts (0.1 increments)

USB Charging (Operates as a Passthrough)

Spring loaded copper center pin

Stainless Steel Threads

Battery step-down function

Auto resistance identification

Magnet back cover

Accepts a single 18650 (not included)

Protection:

Short Circuit

Over Discharge

5 Click Lock/Unlock

Low Resistance


Output Power: 1 to 40 Watts

Output Voltage: 1 to 9 Volts

Output Current: Max 16.0 Amps

Atomizer Resistance (Standard Wire): 0.16 Ohms to 2.0 Ohms. Typical: 0.7 Ohms

Atomizer Resistance (Temperature Sensing, Cold): 0.10 Ohms to 1.0 Ohms. Typical: 0.4 Ohms

Temperature Limit: 200F to 600F

Input Voltage: 3.1 Volts to 4.3 Volts

Input Current: 0.5 Amps to 16.0 Amps. Typical: 8.0 Amps

Dimensions Approx: L90mm x H50mm x W23mm

Connection: 510

Material: Aluminum

Color: Black

Includes:

1 HB DNA 40 Watt Mod

1 USB Cable Retractable

1 Acrylic Box Packaging and User Guide

One of these just arrived today, and so far works well but time will tell. Now I am not going to use nickel wire so the temp feature will be useless to me.

VaportekUSA has them now for $99.39 http://www.vaportekusa.com/hcigar-dna-40-authentic-evolv/

 

[Steampirat]

Sorry but this thing Fugly, I would better save for 80$ more and get also a good box for the DNA40

 

[Zamazam]

Hmm, looks as if the American mod makers now have some big time competition with the Dna40 in a Chinese box. 200 bones is looking kinda steep now for a box mod with a dna40.

 

[omghax]

I've been tempted to get one of these, although I might wait for the clone xD or just wait for it to be a tad cheaper.

 

[steven7010]

Is there an clone for it yet i cant find anything on a clone ??