I am new to building my own coils and all that good stuff. My question is, what build should I have to get great clouds with the stuff I have? I have a #tuglyfe unreg box mod with a Mutation X V3 atty. I usually use 22 gauge Kanthal A1 for my builds. I also have a Royal hunter atty that I like a lot too. The batteries I use are either the NXJO, the LG, or the 212°. I run 2 batteries at all times.
Become a Patron!
Help a girl out please!
- Thread starter SavanahG22
- Start date
What LG batteries? Those are the only ones I recommend of the ones you've listed...never even heard of 212.
22 is pretty thick, ramp-up time is going to be slow and you might get some spitback. I'd try 3 mm ID and 7/8 wrap duals to start, but the same build with 24 or 26 might suit you better.
Steam-engine.org is your friend. I trust you have a reliable ohm meter for safety's sake, correct?
22 is pretty thick, ramp-up time is going to be slow and you might get some spitback. I'd try 3 mm ID and 7/8 wrap duals to start, but the same build with 24 or 26 might suit you better.
Steam-engine.org is your friend. I trust you have a reliable ohm meter for safety's sake, correct?
Welcome from Breazy !!
ObDave's post is a good place to start. How warm do you want your vape? To get really large clouds, you can target the 0.15 to 0.17Ohm range. At .15Ohms you will be drawing 27 amps from your parallel Tuglyfe box, it will be a very warm vape with a lot of clouds.
They are the red LG batteries. Ya I do have an ohm reader. The builds I am making are reading .18 for a 5 wrap with 22 gauge and .22 for 6 wraps. . . I do like a warm vape. Thank you giys so much for the feedback!