Become a Patron!
Help! Kayfun 3.1 ES 510 connection
- Thread starter OFWGKTA
- Start date
The 3.1ES has a bottom 510 portion, the coil/base section, 3 tank rings, the top cap, and drip dip. What I see in the photo is the atty with out the 510 connection section. It simply unscrews where you see seams.
ajaymes2001
Member For 5 Years
Sometimes, to get them apart you will need to use 2 pairs of pliers with a cloth around the atty to avoid scratches. However, in your pic, it looks like that portion is already disassembled.
madmonkey
The Road Warrior
VU Donator
Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
If I see your picture right you have a nemesis or other mech style hybrid connection attached to the bottom and you want to put the standard connection on it correct? There are video's on youtube is you search "Kayfun hybrid adaptor" that well show you what I am about to say....
You unscrew the center pin on the bottom, then you gently remove the base place...once that is off genty wife out any juice in the juice collection tray...then you take the bottom with the 510 connection and screw it on the base of the Kayfun making sure the center pin doesn't cross thread and everything is snug and secure, then make sure the insulator inside the bottom of the center pin is in tact and you take the positive screw and screw it in to tighten everything up and secure it in place.
If you don't have the standard 510 connection place you might be able to find one from Fastech or somewhere...you'd have to google it....I'd think at this point someone has to sell kayfun parts, everyone and the mother has one...as for the connection on it...if your mod has the same threading you can unscrew the topcap and screw this on there but if it isn't going smoothly don't force and destroy your mod threads.
Hope this is some help and good luck.
You unscrew the center pin on the bottom, then you gently remove the base place...once that is off genty wife out any juice in the juice collection tray...then you take the bottom with the 510 connection and screw it on the base of the Kayfun making sure the center pin doesn't cross thread and everything is snug and secure, then make sure the insulator inside the bottom of the center pin is in tact and you take the positive screw and screw it in to tighten everything up and secure it in place.
If you don't have the standard 510 connection place you might be able to find one from Fastech or somewhere...you'd have to google it....I'd think at this point someone has to sell kayfun parts, everyone and the mother has one...as for the connection on it...if your mod has the same threading you can unscrew the topcap and screw this on there but if it isn't going smoothly don't force and destroy your mod threads.
Hope this is some help and good luck.