Herakles RTA 2 Problems

[VapeVillian]

Hey all. I have 2 problems that could possibly be related to each other. I completely disassembled the deck to give it a good cleaning and now have a leaking problem and a lower positive post by about 3mm. I have repeated the process, replaced o rings and double checked the positive pin and positive post screws.

Any help will be greatly appreciated!

Sent from my Nexus 7 using Tapatalk

 

[advancedvapesupply]

Hey all. I have 2 problems that could possibly be related to each other. I completely disassembled the deck to give it a good cleaning and now have a leaking problem and a lower positive post by about 3mm. I have repeated the process, replaced o rings and double checked the positive pin and positive post screws.

Any help will be greatly appreciated!

Sent from my Nexus 7 using Tapatalk

My guess is the insulator not being seated all the way? But if you could, send some pictures of the bottom, and the deck, particularly the middle

Sent from my SM-G935V using Tapatalk

 

[mr vaper]

My guess is that you didn't screw back the center pin all the way

 

[VapeVillian]

My guess is that you didn't screw back the center pin all the way

Nope checked that and the pin (actually broke one making sure it was tight lol).

Sent from my Nexus 7 using Tapatalk

 

[VapeVillian]

My guess is the insulator not being seated all the way? But if you could, send some pictures of the bottom, and the deck, particularly the middle

Sent from my SM-G935V using Tapatalk

Ok so I just took a bunch of pics, not sure if you wanted them all , but figured more is always better LoLz.

Sent from my Nexus 7 using Tapatalk

 

[advancedvapesupply]

Ok so I just took a bunch of pics, not sure if you wanted them all , but figured more is always better LoLz.

Sent from my Nexus 7 using Tapatalk

Hmm. I don't see anything wrong there. Is your issue that the center pin comes out too far on the bottom or the top?

Sent from my SM-G935V using Tapatalk

 

[VapeVillian]

Hmm. I don't see anything wrong there. Is your issue that the center pin comes out too far on the bottom or the top?

Sent from my SM-G935V using Tapatalk

No, it's that the actual posts are offset. Also, the leaking issue I thought may be connected.

Sent from my Nexus 7 using Tapatalk

 

[BoostAddict]

Are your insulators reversed? Your top insulator should be on the positive pin on the bottom?

 

[VapeVillian]

Are your insulators reversed? Your top insulator should be on the positive pin on the bottom?

Just checked and the one on the pin won't fit the post hole. So I don't think so.

Sent from my Nexus 7 using Tapatalk

 

[advancedvapesupply]

Just checked and the one on the pin won't fit the post hole. So I don't think so.

Sent from my Nexus 7 using Tapatalk

Hmm. When I get home I'll take mine apart to try to see what's happening there.

Sent from my SM-G935V using Tapatalk

 

[VapeVillian]

Hmm. When I get home I'll take mine apart to try to see what's happening there.

Sent from my SM-G935V using Tapatalk

Cool man. Preciate it.

Sent from my Nexus 7 using Tapatalk

 

[cany]

Is your top insulator melted? Mine melted and the posts sit offset just like yours in the pic