How to use temp control on an IPV5?

[rj9923]

Hello, I am new to temp control and I'm having some issues with it. A friend quit vaping and gave me an IPV5 with a Uwell Crown tank and a few Ni200 .15 ohm heads. I'm coming here because I can't find much on the IPV5 online besides unboxing videos. I went through the temp control menu and changed it to Ni200, but I have no idea what to set the temperature at. I ended up setting it at 300F. The device was reading the head at .17 ohms, so I clicked both arrow buttons and corrected it to .15 ohms. That is where the issues began because on .15 it does not produce any vapor, as opposed to a little bit at .17. No matter how I tinker with this temp control, it produces nearly no vapor. Am I doing something wrong? Please suggest an average temperature (F) and a good joules setting to start at for a .15 head. Also, on temp control the IPV5 makes a buzzing sound. Thank you.

 

[skt239]

Click the fire button 5 times to enter the menu. Use the + / - button to scroll through menu and select joule mode, then select Ni200. Once you are back on the main screen, hold the up and down button together at the same time to lock the resistance (very important). I would raise the temp to 400 and set the joules to 50. Work your way up or down from there.