... That pulling VG through an 18ga needle sucks. That's all.
A scale and Yorker top bottles, hands down.
dunno how they compare in price, but heartlandvapes.com has 'em (yorkers) in 4oz, 8oz, 16oz, and 32oz http://wholesale.heartlandvapes.com/eliquid-bottles.html (you pick the bottle and then select cap style)I should be able to find them for less, though...
That's my rule of thumb with flavor weight, too.Consistancy is more important than the actual weight
+ pre-dilute VG with 10% demineralized water... and see the difference.Plain syringes without needles...
50% ? No... 5% to 10% for VG part is ok. If you pre-dilute your VG, you don't need to add water in your final mix. Vg thinned with 10% water is the same consistency than PG.Distilled water..But now youre playing with you over all PG VG mix...The water does however thin it out but i wouldnt suggest more than 15 percent...Not the same as PG as a mixer...If you mixed 50 percent distilled water with VG you basicly have water with very little to no Vapor production....Been there done that..wasted 100ml of VG..I used the wasted mix to dilute my VG..lol
And it is much easier to manipulate with syringe.50% ? No... 5% to 10% for VG part is ok. If you pre-dilute your VG, you don't need to add water in your final mix. Vg thinned with 10% water is the same consistency than PG.
This is a laxative lemonade Just add some sicilly lemons to it and drink it !By 50 percent i meant i mixed 50/50 of distilled water and VG which gave me a VG i couldnt vape..The consistency was that of the water.
I want these. Even if I go to weight, will still need something to transfer nic, and would love to go to VG nic, just can't stand the viscosity even after warmed to room temperature, and I don't think it's wise to excessively warm/cool nic base, though I could be crazy...
I just diluted a liter of 100 mg nic the other day by just pouring. With a scale I don't need anything other than my bottles and a beaker.Even if I go to weight, will still need something to transfer nic
Same, I've found mini funnels more useful since pouring, barely small enough for my 30ml bottles. I still use a big 60ml syringe sometimes to split a big batch between bottles smaller than that, so the 12 gauge comes in handy, all SS is easy to sterilize with a butane torch lolI just diluted a liter of 100 mg nic the other day by just pouring. With a scale I don't need anything other than my bottles and a beaker.
Yeah, I kinda sorta found that out the hard way...Best to use something to keep the juice bottle from tipping over, even a short 2x4 with a hole in it will do.
Syringes w/o needles only reach down far enough half the time. I got some Yorker tops, too, recently, and was dismayed to find that the dropper doesn't release fluid much faster than a a regular ejuice dropper top. At first I thought if I cut the tips I would no longer be able to snap the little red top onto them, which would diminish their functionality a lot--but as long as you stay above that little protruding band near the tip, the caps still pop on and stay put. With cut tips they've been a great solution for me.Plain syringes without needles...
Same, I've found mini funnels more useful since pouring, barely small enough for my 30ml bottles. I still use a big 60ml syringe sometimes to split a big batch between bottles smaller than that, so the 12 gauge comes in handy, all SS is easy to sterilize with a butane torch lol
At first I thought if I cut the tips I would no longer be able to snap the little red top onto them, which would diminish their functionality a lot--but as long as you stay above that little protruding band near the tip, the caps still pop on and stay put. With cut tips they've been a great solution for me.
boy, can I relate to this, lol..it's tough to be a 'discriminating' type individual i guess ( read as: 'picky' or 'OCD' lol) of course reserve the right to be a slacker as the mood strikes .. ;p