I-JOY Tornado RDTA

[BigDan]

glass tank too small when tighten up glass spins no need to add juice will flow out
Tried all things even the spare is same size only thing good is Allen wrench
Stay away from this junk

 

[fuseryder]

This means you didn't tighten the inner barrel correctly which is causing the gap, take the deck out and line it up so the deck goes all the way in the barrel flush and screw into the base, this should close the gap

Sent from my SM-G928V using Tapatalk

 

[BigDan]

I tried with the deck out and screwed the barrel all the way down then added the chimney which is part of the
Top (fill port) the glass still has about a 1/8 gap I know the deck has to be put in properly but even with the barrel seated all the way down the glass is to small. Checked the pin and it is flush with bottom. No quality inspection at plant. I did every configuration and cannot make up the space to tighten.has to be wrong size of glass

 

[BigDan]

Thanks Fuseryder for your input but I-JOY just screwed up. like I said before Allen wrench is the only thing good
In the kit