I need help bottom feeding.

[conanthewarrior]

Hi people.

I recently acquired my first sqounker, which already sounds rude enough-now I need help bottom feeding.

The dripper it come with is a bit too roomy, the coil heats up well up to the wattage it is set at, and the TC works, just the dripper is crap.

I am currently charging my drill so I can drill out the 510 Screw on my Stillare V4 clone-it came with two screws, so one I can drill out for having a quick sqounk, the other I can put in to use on standard devices.

I have looked on fasttech, I want to get from there if possible, for a bottom feed dripper, but to no avail.

I wan't to get a few exclusively for this device, and a future sqounker now I know I like it.

Could anyone help me out-a nice clone is fine, just a bottom feeding dripper I can buy? Or am I stuck drilling out and making my own?

Thanks people, Conan.

(This is also on the UK forum POTV, I find there is more activity at different times of day due to the time difference, so thought I would put it here too)

 

[AmandaD]

Your'e in luck - I recently bought the Tobeco Velocity Mini, and it comes with a spare bottom feeding pin. I bought mine from VapeNW here for about $15, but you may be able to find these on Fasttech. I don't know if the full size Velocity clones come with the spare pin, but the small one first perfectly on my Reo (and you don't need a huge reservoir if you're squonking in any event).

 

[conanthewarrior]

Your'e in luck - I recently bought the Tobeco Velocity Mini, and it comes with a spare bottom feeding pin. I bought mine from VapeNW here for about $15, but you may be able to find these on Fasttech. I don't know if the full size Velocity clones come with the spare pin, but the small one first perfectly on my Reo (and you don't need a huge reservoir if you're squonking in any event).

Hang on-most of my tobecco clones come with a spare pin! I could have loads-I will check all my boxes now.

If not, I will check fasttech-would you mind linking me to the one you got? I like the velocity but the mini would be cool for the collection .

 

[conanthewarrior]

no luck for me, just standard pins, at least from my quick search.

I am going to also get another sqounker-this one cost me £12 off of a friend, not the best but its to see if I liked it or not before spending money on it.

Only thing is-I don't want to buy an expensive sqounker if I can't get any decent RDA's with it. The velocity mini sounds great though-think I may well get that.

 

[AmandaD]

This is what I got: http://vapenw.com/velocity-mini-rda-by-tobeco

 

[conanthewarrior]

Ok I drilled out a stillare V4, and it is like a completely different device. Great production at 20W, the dripper it came with was MUCH too big, this provides great cloud, and has made me realise how easy it is to turn any RDA into a squonker.

I will be buying a higher quality one as this is the Kangxin one, I got it for £12 off of a friend, but think I will go for a vapour flask style with a better chip.

Someone did recommend me one, was it the Wadea model? If so I will order that as next months mod of the month, this months one is the Efusion DNA200, should have it in 2 days now they have the stock.

 

[Zamazam]

http://www.vapordna.com/LowPro-RDA-Micro-Rebuildable-Dripping-Atomizer-p/lowpro.htm

Low Pro RDA. This thing freaking rocks as a squonker. Using it on my SIB mosfet protected box mod at .15 Ohms. Freaking tons of vapor and flavor.

 

[conanthewarrior]

http://www.vapordna.com/LowPro-RDA-Micro-Rebuildable-Dripping-Atomizer-p/lowpro.htm

Low Pro RDA. This thing freaking rocks as a squonker. Using it on my SIB mosfet protected box mod at .15 Ohms. Freaking tons of vapor and flavor.

Thanks man, that is on the list-now I just need a better sqounker as this was so cheap as it has a screen issue, it was to see if I like it.

What do you suggest as a good squonker? I quite like the vapour flask styles, I don't mind ordering from china as long as it is not more than £50.

 

[Zamazam]

I have a real vaporflask squonk, it's ok, but under powered for dripping the way I like. There are 60 and 75 watt squonkers out there, but they are unicorns, hard to find. I'm waiting on a DNA200 Squonker, perfect for what I want. I'd seriously look at a mech squonker for the time being. You can tailor the build to the warmth you want. Decent squonkers are hard to come by because the are a niche item, they were incredibly popular 3 years ago, but most of them were mechs. Subtanks really hit the squonk market hard.

 

[Discobob]

I have also seen some rda's that have plentiful room to notch out the insulator instead of drilling the 510. Might look into it.