Ijoy Maxo V12 Supreme Kit

[Paratech]

Time to check out this tank.

The XL-C4 coil is the exact same coil that comes with the Limitless X1.
However it comes with a reducer that threads onto it to make it fit the larger diameter threading in the base.
Yes, that means the Limitless EXO XL coils works as well.

The V12-C12 coil does not require the reducer.

Airflow ring has full stops so it helps when removing the tank from your mod or opening it to change the coil or build deck.
Air flow holes measure 15.3mm X 2.5mm

Drip tip ID is 9.95mm, 17.12 OD at the tip, 18.9mm wide at the base and 10.8mm tall.
Chimney is 8.7mm ID.

Tank is 28mm wide at glass and 28.2mm where the base of the gold "XL" cage meets the base.

 

[Paratech]

The top fill cap locks in place with a hook.
It's pretty simple, push back and allow the spring to flip it open.

 

[Paratech]

 

[Paratech]

Started at 100 watts with the V12-C12 coil on the Digiflavor DF 200.
Seemed pretty weak on flavor and cloud production for what I was expecting but still was enough to get by.
Went to 150 watts.
Here is was just getting started.
Jumped to 200 watts.
Now we're getting some really good flavor and quite a bit of cloud.





Since the coil is rated 60 - 315 watts I decided to move the tank over to the Ijoy Maxo 315.
Jumped to 250 watts.
While I was expecting to be forced to take real quick and short hits from it, I was a bit surprised that it wasn't extremely hot or burnt.
I was able to take a full draw and WOW!
Massive cloud and an abundance of flavor.
Expecting it to be only one or two hits before the wicking failed to keep up, again I was pleasantly surprised that I was able to chain vape it at 250.
So I figured I'd just jump right up to the full 315 watts to see how it went.
Shorter draws at this point due to the amount of vapor being produced and unable to see my screen any longer.
Still chain vaping and only warm at this point.
Even though the vape was only warm I expected the glass to blister my fingers.
Surprised again after 22 medium chain vape draws, it was certainly warm to the touch but not actually hot.
I've vaped the juice down to the bottom of the juice holes on the coil and it is only warm to the touch and not a hot vape.
Not sure if I am more impressed by this or happy.
On this coil I have found my comfort zone to be right around 200 - 225 watts depending on mood.



PERFECT fit!



Supreme Kit Includes:
1 - MAXO V12 Tank
1 - 0.1Ω V12-C12 Twelvefold Coil
1 - 0.15Ω XL-C4 Chip Coil
1 - V12-RT6 Deck
1 - Replacement Glass Tube
1 - 510 Drip Tip Adapter
1 - Screwdriver
1 - Pack of Prebuilt Wires
1 - Vape Band
Spare Parts & O-Rings

Specs:
28mm Diameter wide
62.9mm Tall
5.6mL Juice Capacity
Superior 304 Stainless Steel Construction
Pyrex Glass Reinforcement
Innovative V12 Twelvefold Coil System
0.1Ω V12-C12 Twelve Cylinder Coil - rated for 60-315W
0.15Ω XL-C4 Chip Coil - rated for 50-250W
° Chip Coil requires included adapter
0.2Ω XL-C3 Coil - rated for 50-180W (optional)
V12-RT6 Deck - 3-Point Triple-Post Deck
° V12-RT6 Deck Supports Horizontal and Vertical Triple Coil Builds
° V12-RT6 Deck Features Triple Wicking Slots and Airflow Slots
PEEK-Insulator
Powerful Dual Adjustable Airflow at Base
Convenient Flip-Cap Top-Fill Method
Ultra-Wide Delrin Widebore Drip Tip
24K Gold-Plated 510 Connection

 

[Paratech]

Yes, I am wondering the same two things you are;
1. Do the Smok TFV8 and TFV12 coils fit?
2. Why haven't I built up that V12-RT6 deck yet?
Answer: I'm working on it.
I'll report back with more pics and info soon.


EDIT -- 3/23/2017

The V12-RT6 Deck with triple Demon Killer Violence coils @ 2.75mm ID ended up with 0.07Ω

 

[Paratech]

With a slight twist to the legs these coils slide right in.
At 0.07Ω @ 120 watts it certainly produces quite a cloud and plenty of vapor.
(@100 watts the clouds were there but light on the flavor)








Note:
Ijoy claims it is a spring loaded 510....
They SHOULD have said FLOATING 510.

 

[Deucesjack]

Time to check out this tank.

The XL-C4 coil is the exact same coil that comes with the Limitless X1.
However it comes with a reducer that threads onto it to make it fit the larger diameter threading in the base.
Yes, that means the Limitless EXO XL coils works as well.

The V12-C12 coil does not require the reducer.

Airflow ring has full stops so it helps when removing the tank from your mod or opening it to change the coil or build deck.
Air flow holes measure 15.3mm X 2.5mm

Drip tip ID is 9.95mm, 17.12 OD at the tip, 18.9mm wide at the base and 10.8mm tall.
Chimney is 8.7mm ID.

Tank is 28mm wide at glass and 28.2mm where the base of the gold "XL" cage meets the base.

View attachment 77536 View attachment 77537 View attachment 77538 View attachment 77539 View attachment 77540 View attachment 77541 View attachment 77542 View attachment 77543 View attachment 77544 View attachment 77545

Nice tank, great pics!

Variety's the very spice of life, that gives it all its flavour.

-William Cowper

 

[mjag]

Great write up @Paratech and the pics rock.

I am really looking forward to hearing how the RTA deck works out, that would be my main reason for buying the tank.

I like that Maxo 315 too, dammit, might have to buy one..haha

Sent from my SM-N910P using Tapatalk

 

[Deucesjack]

Great write up @Paratech and the pics rock.

I am really looking forward to hearing how the RTA deck works out, that would be my main reason for buying the tank.

I like that Maxo 315 too, dammit, might have to buy one..haha

Sent from my SM-N910P using Tapatalk

Yep, that V12 Deck looks awesome.

Variety's the very spice of life, that gives it all its flavour.

-William Cowper

 

[Paratech]

Hell, I'm still editing.....lol
Added specs and such.
Hopefully tomorrow I will have time to build on that triple coil deck.
Pretty much spent for the day, been up 31 hours.
My day is over.

 

[mjag]

Hell, I'm still editing.....lol
Added specs and such.
Hopefully tomorrow I will have time to build on that triple coil deck.
Pretty much spent for the day, been up 31 hours.
My day is over.

Dayum Para, there is not enough coffee in the world to keep me up for 31 hours, I would need some booger sugar for that....haha. You are a machine bud!

 

[Paratech]

1. Do the Smok TFV8 and TFV12 coils fit?

Answer: No

 

[Paratech]

Added more pics and the V12-RT6 deck build above.
You wanted info mjag, there ya go.

 

[SirRichardRear]

Nice! Can't wait for mine to arrive

Sent from my SM-G935V using Tapatalk

 

[SirRichardRear]

Just got mine in. waiting for it to prime so i can use it

 

[mjag]

Just got mine in. waiting for it to prime so i can use it

Ok, it's been 6 hours, if you prime it anymore it will be Optimus Prime...lol.

Sent from my SM-N910P using Tapatalk

 

[SirRichardRear]

Ok, it's been 6 hours, if you prime it anymore it will be Optimus Prime...lol.

Sent from my SM-N910P using Tapatalk

LMAO i gave it 30 mins. using the C12 coil it's vaping like a champ it's not the cloud beast of the TFV12 but flavor is on point. vaping it at 150 with a 165 preheat for .5 seconds and the rainbow looks amazing

 

[SirRichardRear]

Formal review is live