Many of you are just now enjoying the new IPV2 50 watt box mod by Pioneer4You. It is a small and compact powerhouse with a nice touch fire innovation (which can be disabled). There are plenty of threads on that unit so I wont go into those details.... BUT I do want to share with you that P4Y has just announced a new 100 watt version called the IPV3 coming real soon.
Here are two videos to check out.
Here is what we think we know right now:
The dimensions, screen, buttons, fire button, and weight are all the same as the iPV2.
The box is the same aluminum box with a USB port (for charging and supposedly to do firmware upgrades to 150 watts later this year) as the ipv2.
The iPV3 apparently uses a new version of YiHI's sx330 version 3 chipset. See LINK. Notice that the low Ohm level is .15. http://www.yihiecigar.com/products_info/YiHiEcigar-SX330-V3-100W-New-Vapor-Chip-270814.html
It currently has ONE 18650 battery (although i think they could get two in that box with the space that is free under some of the inside plastic).
The unit will come in several different colors. (Right now the ipv2 has shipped the charcoal "black" and the light grey. Blue is supposedly heading out the door to ship.
Here is what we are speculating.
IF the iPV3 uses the YiHi sx330 v3 chip how does it have a USB port and how can it firmware upgrade as the YiHi specs say otherwise. (we know the sx350 will do this) Perhaps they have modified the sx330 version 2 somehow (as their are rumors that the ipV2 will also get a firmware update at some point.)
We are not sure of price but early reports say there will be a MSRP of $130-150.00 USD... of course vendors get them much cheaper in bulk.
The release date is tentatively set for ate August or early September (but they are still tweaking some design issues)
I HOPE THEY:
I hope they make a magnetic closure for the back panel to access the battery easily and not have to charge via usb (which is super slow). Early signs of the design seem to show 4 TINY screws however. Ugh! The 2 screws that are on the iPV2 are real testy at times and seem to strip easily.
I hope they make the ipv3 a dual 18650 (esp if you gonna roast that puppy at 100 watts!)
SIDE NOTE:
While I am at it I might as well share with you that there are some new "special edition/limited edition" versions of the 50 watt iPV2 coming out. Apparently P4Y contracted with a few vendors to put their company name on the sticker side and add a black carbon fiber "wrap" on the front and back. (It would be neat to have a Vaping Underground one, huh?) Here is a photo of the VaporRange version:
I have an email in to a couple P4Y design/leaders to clarify a few things and I will try to keep everyone posted.
Thanks for reading this long winded update and sharing in the excitement.
Here are two videos to check out.
Here is what we think we know right now:
The dimensions, screen, buttons, fire button, and weight are all the same as the iPV2.
The box is the same aluminum box with a USB port (for charging and supposedly to do firmware upgrades to 150 watts later this year) as the ipv2.
The iPV3 apparently uses a new version of YiHI's sx330 version 3 chipset. See LINK. Notice that the low Ohm level is .15. http://www.yihiecigar.com/products_info/YiHiEcigar-SX330-V3-100W-New-Vapor-Chip-270814.html
It currently has ONE 18650 battery (although i think they could get two in that box with the space that is free under some of the inside plastic).
The unit will come in several different colors. (Right now the ipv2 has shipped the charcoal "black" and the light grey. Blue is supposedly heading out the door to ship.
Here is what we are speculating.
IF the iPV3 uses the YiHi sx330 v3 chip how does it have a USB port and how can it firmware upgrade as the YiHi specs say otherwise. (we know the sx350 will do this) Perhaps they have modified the sx330 version 2 somehow (as their are rumors that the ipV2 will also get a firmware update at some point.)
We are not sure of price but early reports say there will be a MSRP of $130-150.00 USD... of course vendors get them much cheaper in bulk.
The release date is tentatively set for ate August or early September (but they are still tweaking some design issues)
I HOPE THEY:
I hope they make a magnetic closure for the back panel to access the battery easily and not have to charge via usb (which is super slow). Early signs of the design seem to show 4 TINY screws however. Ugh! The 2 screws that are on the iPV2 are real testy at times and seem to strip easily.
I hope they make the ipv3 a dual 18650 (esp if you gonna roast that puppy at 100 watts!)
SIDE NOTE:
While I am at it I might as well share with you that there are some new "special edition/limited edition" versions of the 50 watt iPV2 coming out. Apparently P4Y contracted with a few vendors to put their company name on the sticker side and add a black carbon fiber "wrap" on the front and back. (It would be neat to have a Vaping Underground one, huh?) Here is a photo of the VaporRange version:
I have an email in to a couple P4Y design/leaders to clarify a few things and I will try to keep everyone posted.
Thanks for reading this long winded update and sharing in the excitement.