IPV4 batteries

[rickinbflo]

Sorry for the noobish question but I respect your opinions.
I have an IPV4 and I am using Orbtronic SX30 30 amp batteries in it. I am not having any problems with these but just wondering if there is a better 30amp out there. I have just started to get into the 0.4 and lower subohm range. thanks for the help.

 

[Zamazam]

the SX30's are good batteries. If you can find them, Sony VTC4 and VTC5's are true 30 amp batteries.

 

[rickinbflo]

Thanks Zamazam I will look at a few of the vendors I have seen in the threads here.

 

[NemesisVaper]

Doesn't matter how low you build on a regulated device. Max Amp draw is max wattage divided by minimum battery voltage plus say 10% forbsafety and boards not being completely efficient.

At full baul and at minimum battery voltage (6.6V) the IPV4 only pulls 15.15A. You're perfectly safe with a good 20A battery like HE2/4 and 25rs. Some retailers have VTC5 in stock again but they get bloody hot at 30A. Not that you'd be near that, so they too would be fine.

 

[rickinbflo]

Thanks Nemesis I should have stated that I still occasionally use a reg mech mod, and I also like to go over on amp cushion just for piece of mind