Ipv4s help

[chuckpie85]

Hey guys j recently bought an ipv4s second hand and when I received it there is juice residue everywhere I'm thinking there may be some inside near the electronics. What would be the best way to dry it out. I'm trying to avoid taking it apart if at all possible. Thanks for your Help

 

[Vapin4Joy]

Hey guys j recently bought an ipv4s second hand and when I received it there is juice residue everywhere I'm thinking there may be some inside near the electronics. What would be the best way to dry it out. I'm trying to avoid taking it apart if at all possible. Thanks for your Help

Hey,
I have leaked juice all over and inside my ipv4 many times, the best way to clean it is to pop the housing open. Get yourself a 3/32 hex key, unscrew the two hex screws, very, very easy, this is the only way to clean the inners, use a q tip dipped in alcohol, remove the batteries first.

 

[chuckpie85]

I kinda jumped the gun and followed this process already its seems like the insulator where this pin is is soaked in jucie any advice for getting that dried out and anyone know what it's made of

 

[chuckpie85]

And Thank you

 

[Vapin4Joy]

I kinda jumped the gun and followed this process already its seems like the insulator where this pin is is soaked in jucie any advice for getting that dried out and anyone know what it's made of

You talking about the 510, the insulator below it, if yes I do not know what it is made of. All I can tell you is I have used a q tip soaked with alcohol and swabbed out the threads and pushed the q tip down to the insulator and cleaned it with no problems.

 

[chuckpie85]

Yes the insulator in the 51o gonna let it sit upside down overnight see if that helps

 

[DevAuto]

Yes the insulator in the 51o gonna let it sit upside down overnight see if that helps

It may help a little, but like @Vapin4Joy said, a qtip dipped in alcohol will likely be necessary to really get it all cleaned out. Good luck!