Hi Vaping Underground members, In this review i take a look at the eGo AIO Mansion Starter Kit 1300mAh from Joyetech. The eGo AIO Mansion Starter Kit was supplied for the purpose of this review by Ella from Joyetech.
http://www.joyetech.com/product/ego-aio-mansion/
https://www.joyetech.com/online/joyetech...nsion.html
Introduction
The eGo AIO Mansion is a device which looks very much like a pod device but is an AIO device allowing the coils to be replaced. The device allows both suction activation and the use of a fire button, having both options available on the same device is a new one on me and makes the eGo AIO Mansion worthy of a further look, so lets do that!
In the Box
Contents:
1x eGo AIO Mansion Kit
2x BF SS316 0.6ohm Head
1x USB Cable
1x Warranty Card
1x Warning Card
Aesthetics and Ergonomics
The eGo Mansion comes in the usual Joyetech cardboard box packaging and on opening i was met by a device which on first glance looks like another pod system. I received the Black version it's also available in Rose Gold, Orange, Silver and Gold, there is also a special edition White version that can only be purchased via Joyetech's online store. The entire body of the device's sides, front and back has a classy looking grooved effect which the matte rather than glossy finishes suit well. On both sides of the device we have vertical pill shaped viewing windows at the top, below the viewing window one side we have a horizontal rectangular metallic Silver physical button, the other side we have a micro USB port. The base of the device is also metallic Silver and has good venting and safety marks stamped into the metal. The top of the device see's metallic Silver plaques both front and back, these plaques are joined together by the metallic Silver circling the entire device, one plaque has "JOYETECH" stamped into the plaque the other "eGo AIO MANSION". Above the metallic section we have the mouthpiece section which comes with a translucent Black removable cover, removing the cover reveals the mouthpiece section is Black and where it enters your mouth its a thin but quite long horizontal pill shaped. The device seems very good build quality and the little sections of metallic Silver contrast against the matte finish very well, the device is pocket friendly and ergonomic.
eGo AIO Mansion Specs and Features:
Size: 33.0 x 17.5 x 103.0mm
E-liquid Capacity: 2ml
Coil head: BF SS316 0.6ohm Head
Battery capacity: Built-in 1300mAh
Inspired by the Empire State Building
Pocket-friendly all-in-one starter kit
Luminous liquid visible window
Two vape ways of direct inhale and hold button to vape
1300mAh built-in battery with anti-leaking structure
2ml capacity with 7-colour indicator light
BF SS316 0.6ohm head for MTL inhale
Colours: Black, Rose Gold, Orange, Silver, Gold
White version only available from Joyetech online
filling
To fill the device the mouthpiece needs to be pulled off, there is a notch either side which helps to get part of your fingernail in to help with this. These two holes are not the airflow but do allow air to enter and circulate in the top piece to feed the airflow proper. Once the mouthpiece is off you can see a large pull out silicone bung which needs to be pulled out in order to fill the device with juice (despite the bung being attached to the device you still get spares in case it snaps off and you lose it), the fill port is a big pro on the Mansion as it's a generous size so filling isn't a messy affair. There are large clear viewing windows either side of the device which you can use to help fill to the correct level, you can also see your juice level at all times. The device holds 2ml of juice and once filled simply replace the plastic bung.
Changing the coil
I have already explained how to remove the mouthpiece, opposite the filling hole we have an air pipe with a groove that allows you to tighten and un-tighten with the flat-head tool which is fixed to the inside of the mouthpiece. Once un-tightened the pipe can be unscrewed the rest of the way with your fingers and pulled out. When the air pipe has been pulled out you will see the BF coil gets screwed onto the bottom of the pipe. First prime the coil then screw onto the pipe, lower the air pipe with attached coil into the device, tighten first with your fingers and then with the tool. To put the mouthpiece back on you will see from looking inside the mouthpiece which way it fits as there are the appropriate gaps for the fill bung and air pipe to fit into. The mouthpiece is just press fitted into place but is a nice tight fit unlike the outer dust cap, with mine it is quite loose. The coils you get with the Mansion Kit are 2 BF SS316 0.6ohm.
The Airflow
The airflow control is easily missed unless you realise it's on the top section of the air pipe that protrudes outside the e-liquid tank section, underneath the mouthpiece. To adjust the airflow you need to take the mouthpiece off so until you workout exactly how you like it set it can take a lot of removing the mouthpiece and making small adjustments until you have it just right. Despite needing to remove the mouthpiece it's still a big pro being able to adjust the airflow as so many pod and AIO devices have fixed airflow. With the Mansion you can have anything from a very tight MTL vape right up to a lung hit (it's very restrictive but you can do it). The airflow itself is adjusted by turning a protruding ring with heavy knurling that's on the top of the air pipe, the airflow is dual mini cyclops.
Review Continued Below:
http://www.joyetech.com/product/ego-aio-mansion/
https://www.joyetech.com/online/joyetech...nsion.html
Introduction
The eGo AIO Mansion is a device which looks very much like a pod device but is an AIO device allowing the coils to be replaced. The device allows both suction activation and the use of a fire button, having both options available on the same device is a new one on me and makes the eGo AIO Mansion worthy of a further look, so lets do that!
In the Box
Contents:
1x eGo AIO Mansion Kit
2x BF SS316 0.6ohm Head
1x USB Cable
1x Warranty Card
1x Warning Card
Aesthetics and Ergonomics
The eGo Mansion comes in the usual Joyetech cardboard box packaging and on opening i was met by a device which on first glance looks like another pod system. I received the Black version it's also available in Rose Gold, Orange, Silver and Gold, there is also a special edition White version that can only be purchased via Joyetech's online store. The entire body of the device's sides, front and back has a classy looking grooved effect which the matte rather than glossy finishes suit well. On both sides of the device we have vertical pill shaped viewing windows at the top, below the viewing window one side we have a horizontal rectangular metallic Silver physical button, the other side we have a micro USB port. The base of the device is also metallic Silver and has good venting and safety marks stamped into the metal. The top of the device see's metallic Silver plaques both front and back, these plaques are joined together by the metallic Silver circling the entire device, one plaque has "JOYETECH" stamped into the plaque the other "eGo AIO MANSION". Above the metallic section we have the mouthpiece section which comes with a translucent Black removable cover, removing the cover reveals the mouthpiece section is Black and where it enters your mouth its a thin but quite long horizontal pill shaped. The device seems very good build quality and the little sections of metallic Silver contrast against the matte finish very well, the device is pocket friendly and ergonomic.
eGo AIO Mansion Specs and Features:
Size: 33.0 x 17.5 x 103.0mm
E-liquid Capacity: 2ml
Coil head: BF SS316 0.6ohm Head
Battery capacity: Built-in 1300mAh
Inspired by the Empire State Building
Pocket-friendly all-in-one starter kit
Luminous liquid visible window
Two vape ways of direct inhale and hold button to vape
1300mAh built-in battery with anti-leaking structure
2ml capacity with 7-colour indicator light
BF SS316 0.6ohm head for MTL inhale
Colours: Black, Rose Gold, Orange, Silver, Gold
White version only available from Joyetech online
filling
To fill the device the mouthpiece needs to be pulled off, there is a notch either side which helps to get part of your fingernail in to help with this. These two holes are not the airflow but do allow air to enter and circulate in the top piece to feed the airflow proper. Once the mouthpiece is off you can see a large pull out silicone bung which needs to be pulled out in order to fill the device with juice (despite the bung being attached to the device you still get spares in case it snaps off and you lose it), the fill port is a big pro on the Mansion as it's a generous size so filling isn't a messy affair. There are large clear viewing windows either side of the device which you can use to help fill to the correct level, you can also see your juice level at all times. The device holds 2ml of juice and once filled simply replace the plastic bung.
Changing the coil
I have already explained how to remove the mouthpiece, opposite the filling hole we have an air pipe with a groove that allows you to tighten and un-tighten with the flat-head tool which is fixed to the inside of the mouthpiece. Once un-tightened the pipe can be unscrewed the rest of the way with your fingers and pulled out. When the air pipe has been pulled out you will see the BF coil gets screwed onto the bottom of the pipe. First prime the coil then screw onto the pipe, lower the air pipe with attached coil into the device, tighten first with your fingers and then with the tool. To put the mouthpiece back on you will see from looking inside the mouthpiece which way it fits as there are the appropriate gaps for the fill bung and air pipe to fit into. The mouthpiece is just press fitted into place but is a nice tight fit unlike the outer dust cap, with mine it is quite loose. The coils you get with the Mansion Kit are 2 BF SS316 0.6ohm.
The Airflow
The airflow control is easily missed unless you realise it's on the top section of the air pipe that protrudes outside the e-liquid tank section, underneath the mouthpiece. To adjust the airflow you need to take the mouthpiece off so until you workout exactly how you like it set it can take a lot of removing the mouthpiece and making small adjustments until you have it just right. Despite needing to remove the mouthpiece it's still a big pro being able to adjust the airflow as so many pod and AIO devices have fixed airflow. With the Mansion you can have anything from a very tight MTL vape right up to a lung hit (it's very restrictive but you can do it). The airflow itself is adjusted by turning a protruding ring with heavy knurling that's on the top of the air pipe, the airflow is dual mini cyclops.
Review Continued Below:
