Become a Patron!

Joyetech EXCEED D19 Kit. "Do you remember, how it all began?"

Vape Path

Member For 2 Years
Member For 1 Year
Unlisted Vendor
Hi to all!;)
Today I would like to talk about starter kit Joyetech EXCEED D19 , which was sent straight by Joyetech Co. (thanks!)

29.jpg

It came in a grey and white box. On the face side you can see the picture of device, Joyetech logo and the info, that it`s a test device.
On the back side we can find the logo, set info, certificates and warnings, the name of starter kit and manufacturer contacts.

31.jpg

30.jpg

As for set, it has the most important accessories, which will provide the stable work process of device.

28-1.jpg

Joyetech EXCEED D19 set:
1 * Joyetech EXCEED D19 battery;
1 * Joyetech D19 atomizer;
1 * Replacement coil head EX DL (0,5 Оhm);
1 * Replacement coil head EX MTL (1,2 Оhm);
1 * USB cable;
4 * Spare o-rings;
1 * Spare glass tube;
2 * User manual;
1 * Warranty card;
1 * Warning card;
2 * Stickers​

Starter kit consists of 2 parts: of battery and atomizer. They`re pleasant to the touch with a coarse coating. Colors are strict without really bright representatives, which tells us, that this is a serious device for serious people.

27.jpg

Joyetech EXCEED D19 specifications:
Sizes:
118.0 mm (with atomizer) * 19 mm;
Weight: 73.0g;
Цвет: Silver, black, white, dark orange, black and white;
Capacity: 2 ml;
Wire type in coils: NiCr;
Replacement coil heads: EX DL, EX MTL;
Battery: Built-in,1500mAh;
Modes: Direct output mode and constant voltage output mode;
Protection list: From shirt circuit, over- and discharge, high voltage; venting hole​


On the face side there is a round «Fire» button. It has a momentum response without misfires and besides the turn on/off function it also changes modes.

Inside you can see a non-springed connector and led-light ring indicator, which shows the set mod or battery`s level and system messages about mistakes.

25.jpg

Battery`s charge led indicator:
100%-60% — stay leat;
59%-30% — slowly flashes;
29%-10% — moderator flashes;
9%-0% — flashes in friquency

System mistakes led indicator:
High resistance: diod flashes slowly;
Short circuit and low resistance: diode will flash for 5 times, and the battery`ll turn off;
Short circuit while vape process: diode will flash for 3 times, and the battery`ll turn off
Cut-off more than 15 sec: diode will flash for 10 times, and the battery`ll turn off;
Low voltage: diode will flash for 40 times, and the battery`ll turn off


From the bottom there is one venting hole, which makes the vape process safer.

26.jpg

Micro USB port is situated on the opposite to "Fire" button side.

16.jpg

For to turn the Joyetech EXCEED D19 on/off you will have to push "Fire" button for 5 times.


If you want to change the mode, you will have to remember, that the standard mode from the box is «Direct output», and it flashes with orange light. If you want to set the other mode, you need to turn off the device and clamp «Fire» for a few seconds. The diode will change its light to white and you`ll use the «Voltage output mode».
As for autonomy, this is pretty good for complete MTL head, and if you use Dl one – it will disappear faster. So, its index depend on your method of vaping.

23.jpg

24.jpg

Now, let`s talk about Joyetech EXCEED D19 atomizer, guys!

22.jpg


It has middle sizes, 2 ml capacity and the height is 46 mm.
D19 atomizer consists of 6 parts: of base, airflow control ring, replacement coil head, glass tube, filling ring and top cap with drip tip.

21.jpg

The base is made with uncontrollable pin and fine airflow tuning.
You can see some dot holes, which will help to make the puff really tough.
I didn`t like the moment of control ring set: o-ring from the base prevents the window to provide air correct and strives to close it, so you have to put it on at an angle. This is a really hard work)))))

19.jpg

Joyetech EXCEED D19 atomizer works with 2 EX types of coil heads (DL и MTL), which can provide you a different experience. They have 0.5 and 1,2 Ohm resistance and are of gold and silver colors with 4 holes for juice impregnation.
The flavor is pretty good, and I can say, that it will attract not really fastidious users.

17.jpg

The filling ring is monolithic to a small shaft and fixes to a coil head with a thread. It has 2 holes for filling and a small niche, which will solve the leaks problems.

20.jpg

At the last part – D19 has a delrin drip tip, which is monolithic to top cap. This is a controversial decision, because if you use it often: screw and unscrew – maybe it will break down.

18.jpg

Pros:
•Sizes;
•Tough cigarette puff;
• Fine airflow tuning;
•Top filling;
•Not bad flavor;
•Quality and assembly

Cons:
•Price;
•Autonomy;
•Not convenient set of air control ring;
•Top cap has a delrin thread


CV
Well, in my time I began from similar to EXCEED D19 devices and am thankful to Joyetech Co. for them, `cause they`ve opned the vape world for me.
Joyetech EXCEED D19 – is a contradictory device, which has pros, but also some cons, which can scare off potential customers, and the most famous among them – the type of device without display, popular modes, etc.
It has not bad flavor (compare with some other such a devices), convenient top filling, fine airflow tuning, compact sizes and cigarette puff, but some nit-picking make you think wheter the game costs of candles.

The price is about 20-30$, and I think, that it`s high. You can find anything else for less money and not from series, similar to «EGO».

You can buy Joyetech EXCEED D19 kit here.


 
Last edited:

VU Sponsors

Top