Hi Vaping Underground members, In this review i take a look at the ULTEX T80 80W TC Kit with Cubis Max from Joyetech. The ULTEX T80 80W TC Kit with Cubis Max was supplied for the purpose of this review by Ella from Joyetech.
http://www.joyetech.com/product/ultex-t80-cubis-max/
Introduction
The Ultex T80 is a solidly made, futuristic looking tubular single 18650 regulated device with a maximum wattage of 80w. Despite having a full TC suite and other features including setting up your own tailored pre-heat the device has a very simple user friendly interface and minimalist display. The Ultex T80 comes paired with the very interesting and innovative Cubis Max tank which rather than a coil uses a flat film called the NCFilm heater, which boasts longevity far greater than we have known in the past. Joyetech claim after long term testing of the NCFilm heater it should last for at least 3 months. The tank also has a very simple wicking method and has a top airflow leakproof design, enough said let's give the kit a look!
In the Box
Contents:
1x ULTEX T80 (no cell)
1x Cubis Max atomizer (including NCFilmTM heater)
1x QC USB cable
1x User Manual
1x Warranty card
1x Warning card
1x Spare NCFilm heater
Spare pre-cut cotton
Screwdriver
Spare glass
Spare parts
Aesthetics and Ergonomics
The Ultex T80 with Cubis Max came in cardboard box packaging, once opened i was met by a futuristic looking tubular device which is covered in raised textured areas. Although the device is plain in the way of it being a solid one colour device the complex raised areas of the device gives it (in my view) an aesthetically pleasing appeal. I received the Matte Black version, it's also available in SkyBlue, Gold, Silver and Dazzling, and all devices come with matching Cubis Max tank. The tank has texturing to both the top and bottom which matches the textured design on the device and just above and below the glass are thin silver bands which breaks the colour up nicely. The front of the device has a small screen at the bottom and large Black fire button at the top, the fire button has a translucent flattened bottom "V" in the middle of it that lights up when vaping, between the fire button and the screen we have the Black up and down buttons lined up vertically. The back of the device has the micro USB port towards the top, the base of the device has branding and small venting holes. Finally on top of the device we have printed safety stamps and a Gold plated, spring loaded 510. The build quality is very good and the device has some reassuring weight to it, there are no rattles whatsoever and with it being tubular it has sound ergonomics.
Cubis Max Specs and Features:
Diameter: 28.0mm
Height: 48mm
Capacity: 5ml
Heater: Joyetech NCFilmTM Heater (Kanthal) (Best at 35W-45W)
New Concept Coil-less Atomizer with 5ml Large E-liquid Capacity
Larger Heating Area for Great Flavor
Durable Long Lifespan
Easy Slide Top Refill and Bottom Airflow System
Thread: 510
Colours: Matte Black, SkyBlue, Gold, Silver, Dazzling
The NCFilm Heater
Instead of a coil as we know it the Cubis Max uses the new NCFilm heater which actually is a coil but flattened out. From the name and the picture no prizes for working out it's a thin NotchCoil that has been flattened out and not that dissimilar to the stovecoil idea but rather than circular this is rectangular and not pre-wicked so you can change the wicking time and time again making full use of the NCFilm heater longevity. Also the NCFilm is not relying on the tilt of the tank to saturate the cotton as it's placed in the base of the tank with cotton placed underneath so liquid saturates the cotton in a more traditional fashion.
Cubis Max Overview
Starting at the top of the tank we have a delrin drip tip which is a standard 510 fitting so you will be able to use your own 510's. The Cubis Max is top-fill and on top of the tank is a clear arrow which shows you where to push for the top to slide it open, it clicks into position once fully open revealing a single and quite small juice port so a bit of patience is needed when filling. The Base of the tank is where this differs from others, when you unscrew the base from the tank the 510 is left on the tank, you now pull the 510 which pulls out a circular section. The inner side of this circular section is ceramic and has a rectangular cutout which is where a rectangular piece of cotton needs to be placed to wick the NCFilm (included with the kit are several pre-cut pieces of cotton). looking inside the base of the tank you will see the NCFilm screwed into place via 2 small screws (when unscrewing the NCFilm you have to be careful not to lose the screws and again a bit of patience is needed when trying to screw the NCFilm back into position (i wish the screws were bigger)). Above and below the NCFilm are slots for the juice in the tank to travel through to wick your cotton, when placing the circular ceramic section back into the base of the tank there is a little notch on the side and corresponding cutout on the base so the section slots into the correct position. Before putting the base section back together prime the cotton, then you can place the circular section back into place, screw the bottom back on to the tank then fill.
ULTEX T80 Specs and Features:
Size: 28.0 x 93mm
Battery: Single 18650 Battery (not included)
Screen: 0.49 inch OLED display
Output: 1-80W
Modes: Power/Bypass/Temp(Ni/Ti/SS)/TCR
Resistance range: 0.05-1.5ohm for TEMP/TCR mode
0.05-3.5ohm for POWER mode
Powerful pen-style MOD with Intuitive OLED screen
Multi protections for safety vaping
Supporting 2A quick charge
Upgradeable firmware
Thread: 510
Colours: Matte Black, SkyBlue, Gold, Silver, Dazzling
Review Continued Below:
http://www.joyetech.com/product/ultex-t80-cubis-max/
Introduction
The Ultex T80 is a solidly made, futuristic looking tubular single 18650 regulated device with a maximum wattage of 80w. Despite having a full TC suite and other features including setting up your own tailored pre-heat the device has a very simple user friendly interface and minimalist display. The Ultex T80 comes paired with the very interesting and innovative Cubis Max tank which rather than a coil uses a flat film called the NCFilm heater, which boasts longevity far greater than we have known in the past. Joyetech claim after long term testing of the NCFilm heater it should last for at least 3 months. The tank also has a very simple wicking method and has a top airflow leakproof design, enough said let's give the kit a look!
In the Box
Contents:
1x ULTEX T80 (no cell)
1x Cubis Max atomizer (including NCFilmTM heater)
1x QC USB cable
1x User Manual
1x Warranty card
1x Warning card
1x Spare NCFilm heater
Spare pre-cut cotton
Screwdriver
Spare glass
Spare parts
Aesthetics and Ergonomics
The Ultex T80 with Cubis Max came in cardboard box packaging, once opened i was met by a futuristic looking tubular device which is covered in raised textured areas. Although the device is plain in the way of it being a solid one colour device the complex raised areas of the device gives it (in my view) an aesthetically pleasing appeal. I received the Matte Black version, it's also available in SkyBlue, Gold, Silver and Dazzling, and all devices come with matching Cubis Max tank. The tank has texturing to both the top and bottom which matches the textured design on the device and just above and below the glass are thin silver bands which breaks the colour up nicely. The front of the device has a small screen at the bottom and large Black fire button at the top, the fire button has a translucent flattened bottom "V" in the middle of it that lights up when vaping, between the fire button and the screen we have the Black up and down buttons lined up vertically. The back of the device has the micro USB port towards the top, the base of the device has branding and small venting holes. Finally on top of the device we have printed safety stamps and a Gold plated, spring loaded 510. The build quality is very good and the device has some reassuring weight to it, there are no rattles whatsoever and with it being tubular it has sound ergonomics.
Cubis Max Specs and Features:
Diameter: 28.0mm
Height: 48mm
Capacity: 5ml
Heater: Joyetech NCFilmTM Heater (Kanthal) (Best at 35W-45W)
New Concept Coil-less Atomizer with 5ml Large E-liquid Capacity
Larger Heating Area for Great Flavor
Durable Long Lifespan
Easy Slide Top Refill and Bottom Airflow System
Thread: 510
Colours: Matte Black, SkyBlue, Gold, Silver, Dazzling
The NCFilm Heater
Instead of a coil as we know it the Cubis Max uses the new NCFilm heater which actually is a coil but flattened out. From the name and the picture no prizes for working out it's a thin NotchCoil that has been flattened out and not that dissimilar to the stovecoil idea but rather than circular this is rectangular and not pre-wicked so you can change the wicking time and time again making full use of the NCFilm heater longevity. Also the NCFilm is not relying on the tilt of the tank to saturate the cotton as it's placed in the base of the tank with cotton placed underneath so liquid saturates the cotton in a more traditional fashion.
Cubis Max Overview
Starting at the top of the tank we have a delrin drip tip which is a standard 510 fitting so you will be able to use your own 510's. The Cubis Max is top-fill and on top of the tank is a clear arrow which shows you where to push for the top to slide it open, it clicks into position once fully open revealing a single and quite small juice port so a bit of patience is needed when filling. The Base of the tank is where this differs from others, when you unscrew the base from the tank the 510 is left on the tank, you now pull the 510 which pulls out a circular section. The inner side of this circular section is ceramic and has a rectangular cutout which is where a rectangular piece of cotton needs to be placed to wick the NCFilm (included with the kit are several pre-cut pieces of cotton). looking inside the base of the tank you will see the NCFilm screwed into place via 2 small screws (when unscrewing the NCFilm you have to be careful not to lose the screws and again a bit of patience is needed when trying to screw the NCFilm back into position (i wish the screws were bigger)). Above and below the NCFilm are slots for the juice in the tank to travel through to wick your cotton, when placing the circular ceramic section back into the base of the tank there is a little notch on the side and corresponding cutout on the base so the section slots into the correct position. Before putting the base section back together prime the cotton, then you can place the circular section back into place, screw the bottom back on to the tank then fill.
ULTEX T80 Specs and Features:
Size: 28.0 x 93mm
Battery: Single 18650 Battery (not included)
Screen: 0.49 inch OLED display
Output: 1-80W
Modes: Power/Bypass/Temp(Ni/Ti/SS)/TCR
Resistance range: 0.05-1.5ohm for TEMP/TCR mode
0.05-3.5ohm for POWER mode
Powerful pen-style MOD with Intuitive OLED screen
Multi protections for safety vaping
Supporting 2A quick charge
Upgradeable firmware
Thread: 510
Colours: Matte Black, SkyBlue, Gold, Silver, Dazzling
Review Continued Below:
