Silo Beast just came in, and it's hitting like a champ.
Become a Patron!
Just got my Beast
- Thread starter kingchapp352
- Start date
Sure
Couldn't get it to upload on here but I just uploaded a video to YouTube just look up silo beast, big black guy can't miss me.
No they said they were going to send them separately, and it has come yet.
Just got mine on Tuesday! Like a champ! I'd say like a BOSS!
Yea for sure
Sent from my Samsung Galaxy S5 Dumbphone
Sent from my Samsung Galaxy S5 Dumbphone
Yea man your right, just wish it had an rba deck, but other than that I plan on getting a couple more.Just got mine on Tuesday! Like a champ! I'd say like a BOSS!
Me too. But the anyvape rba coil that fits the atlantis fits the Silo Beast better. And I saw the V2 of that coil available online for about $6. About to pick up some Atlantis V2 coils though in a few days.
The v2 of the rba
rudogg760
Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Ive been using it with the atlantis nickel coil, i didnt even use the stock coils. I love it, top tank so far, i have a vid on youtube as well. Silo beast with nickel coils. Its beautiful and well built.
Nice setup. I don't even have a device that will compatible with the nickel coils.Ive been using it with the atlantis nickel coil, i didnt even use the stock coils. I love it, top tank so far, i have a vid on youtube as well. Silo beast with nickel coils. Its beautiful and well built.
rudogg760
Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Thanks, i just saw my vid didnt upload, ill try n re upload it. And yea i recommended with the nickel coils, i put an atlantis v2 .5 ohm coil and it was reeaally good. Then i put nickel in it n woah a step up. I cant comment on the stock coils.
I'm gonna try the v2 coils for sure
Close the airflow before opening the top. Fill it, close the top then open the airflow. This creates the vacuum. All top fills require this. More so with thinner juices.
Yeah. It has 2 holes drilled into the chimney (making it look like the stock coils) to increase the wicking.
Yea, I was noticing some leakage.
rudogg760
Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
ive done this, and i use max vg juices, in my video i suggest to users to close the afc and it still does it :/ other than the leakage i love the tank but its getting frustrating. i like tanks cause i dont have to deal with the juice getting everywhere and this defeats the purpose
The only thing I can think of is to take the tank completely apart and make sure all of the o rings are there. Specifically the ones over and under the glass. I haven't had one leaking issue at all. And a few times I filled it I forgot to close the airflow and still no leaks.
Yea mine isn't really leaking to bad, sometimes when refilling the afc comes open, that's probable cause for the minimum leakage I'm experiencing. They could have put a tad bit more resistance in the afc but whatever. Has anyone received the new seal for the top yet
Well my local Beyond Vape shop (there's 3 around me) says they'll get them in about 2 weeks. Emails will be sent out when they do was what I was told. I just modded mine till then.
I also cut mine open too. My local BV shop said the shop itself should be getting them in about two weeks and we should all expecting emails about them
I did the same but I think I cut too much because now juice pops into my mouth and sometimes juice collects under the dip tip. Any of you have these issues
The juice popping is common. With almost any tank or RDA. And I get the condensation under the drip tip too. Welcome to having a dense vape!
Put mine on order today. Will receive it Wednesday... Pretty stoked about it...
So I'm now using the Atlantis V2 0.5 ohm coils in my Beast and...Whoa. Flavor AND clouds!
Sounds awesome. Can't wait to try mine tomorrow with Atlantis nickel coils
Sent from my Samsung Galaxy S5 Dumbphone
Just got the beast in. Yes it is a great tank and may beat out the Atlantis. However the top gasket was the original so I cut it out a little bit. Apparently too much cause this thing is too airy now. Damn it. Hopefully the new top gasket will bring some common sense to it. Filled it twice shutting the air control off both times and both times the bitch flooded. May be the oversized top gasket so I will wait to pass judgement till I get the right replacement gasket in. The vape has very dense clouds and flavor is great to. Before modifying the gasket it was a bit of a tight draw and muted flavor so I'm sure the happy medium will work great. When the modified gasket she whistles if I close the air down too much.
Sent from my Samsung Galaxy S5 Dumbphone
Sent from my Samsung Galaxy S5 Dumbphone
rudogg760
Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Yea them v2 .5 ohm coils are no joke. Clouds for days. What wattage do you run yours at? They say something like 20 to 30 watts but it doesnt come alive for me until i hit it with 50 watts.
rudogg760
Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Pic of the gasket cut? Also i just ordered the shorty tank. Does anyone have any experience? I would think the flavor is better with a shorter chimny.
Last edited:
Here is the cut gasket. I contacted beyond vapes last night and they responded that they would send the new "beast gasket " so it appears they have them now.
Sent from my Samsung Galaxy S5 Dumbphone
Almost looks like mine, I agree it a bit to airy now but it's not that bad to where I don't wanna use it. I guess because my flavor hasn't diminished.
If I crank up the power it does get better but a bit hot. I have it tuned in pretty good now between the air and power with nickel colis. She is Def a great tank. Betting with right gasket it will be amazing
Sent from my Samsung Galaxy S5 Dumbphone
I have no idea. My iStick 50w's screen went blank on me 2 weeks ago. I set it by feel until the vape feels like it does when I use my 18650 tube mech.
Has anyone received in their new beast gaskets for the Silo Beast? I put mine on the shelf till I get the new seal. The tank has great potential but I cannot vape on it now with the screwed up seal from me cutting too much out. It either is too airy or whistles if I close the AFC down to where I enjoy my vape. Its a shame as I was very excited to get this but then my own doing ruined it for me. Should have just stuck to the original till the new seal came. Oh well, we are always trying to get more out of our devices. hahahahh
I'm actually about to go to my local Beyond Vape to get some juice and see if the new seals came in yet.
If they have them I'd be interested in hearing your thoughts on how it performs
Sent from my Samsung Galaxy S5 Dumbphone
Well they don't have them yet. I just left there about an hour ago from the time of this post. I would assume it works as well as cutting open the current one-which Btw works well. The draw is smoother and airier.
I did cut mine but too much. Way to much air now. Closing it down gives me an annoying whistle.
Sent from my iPad using Tapatalk
Have any of you tried it with any other juice ratio besides max vg
The lowest I have currently mixed is 80% I could mix up something lower tomorrow n test it. I do love the tank just hoping the new gasket with be the key
Sent from my Samsung Galaxy S5 Dumbphone
Me too, I just ordered the rba heads as well I hope that goes well.
rudogg760
Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
I made the same mistake with mine. I just got the short tank in and made it really wide, im on the fence tho. I like a. airy draw but this quite insane with the atlantis v2 coils.
Sent from my LG-D851 using Tapatalk
Sent from my LG-D851 using Tapatalk
I hear ya brother. It's Def very airy that wide open. Looking forward to someday getting the new beast seal as they call it
Sent from my Samsung Galaxy S5 Dumbphone
Sent from my Samsung Galaxy S5 Dumbphone
buffaloruffneck
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Just got mine today. Running it with the stock .5 coil - cut the gasket as well - mouth full of juice half the time but I like it so far. Agreed on the wattage bump as well, no funk taste until 60 watts!!! It was leaking on me with every fill. Stopped it by closing afc, filling, replacing top cap, quickly fliping it upside down then right side up, open afc. That did the trick. High maintenance so far but I'm just that kind of freak I guess.