So i'm fairly new to mech mods but I've done my research. So i have a Vgod pro mech with a vgod elite rda. I'm running a build which reads at .18 ohms. I'm just wondering if i'm safe running my sony vtc4 batteries with no problems. they are 30 amp continuous so i'm assuming it's fine since that gives me a good amount of headroom when fully charged. I also have 25r's which i'm too scared to use. Would it be safe to use 25r's with a build like this? Sorry for so many questions on one post.
Become a Patron!
Just wondering if this setup is safe enough.
- Thread starter TheNewVapor
- Start date
The samsung 25r is rated/tested safe up to 20 amps by Mooch. LG HB series batteries are rated up to 30 amps
https://batterybro.com/collections/moochs-recommended/ampint_20-30
You would be pushing your 25r slightly past it's rated amp threshold, which will cause more heat and shorter battery lifespan. You may make your own decision with this information.
https://batterybro.com/collections/moochs-recommended/ampint_20-30
You would be pushing your 25r slightly past it's rated amp threshold, which will cause more heat and shorter battery lifespan. You may make your own decision with this information.
Thanks for the link. That's exactly why i was scared to use the 25r. I did see the pulse rating was 100amps but i'm not trying to go past the max. continuous discharge rating.
I prefer running 0.3 or higher Ohm on my mech mods.