Hi, guys! Welcome to New Product Introduction! I have a question: do you need a Mechanical Mod at present? Today let me introduce you one mod named Vapeasy Meca DIY BF Squonk Mechanical Mod Clone(Replica). Now let’s take a closer look at the mod below.
The Vapeasy Meca DIY BF Squonk Mechanical Box Mod Clone is constructed from PC and stainless steel. You can find with the DIY Box a complete kit with screws and 2 plates. One superior plate for the connection with a One BF connector. It is entirely assembled with insulators and a connection strip. The plate is made in Stainless Steel and the connection strip. The inferior plate is also in Stainless Steel.
Main Features:
510 threading connection
PEI and stainless steel construction
Powered by 1 x 18650 battery (not included)
Silicone Squonker bottle capacity: 6.0ml
Atomizer connector diameter: 24mm
Installation of your DIY Box Mod
Screw the battery tube onto the lower plate
Place the button in the body
Insert the top plate on the body
Screw using the two screws provided
Insert the BF bottle
Insert your battery into the tube, positive pole upwards
Screw the battery caps
Your DIY Box is ready
There are three colors for you to choose, so which color is your favourite? If you want to get one, you can come here:
Vapeasy Meca DIY BF Squonk Mechanical Mod Clone(Replica) >>>
Recommended RDA:
Wotofo Profile RDTA / RDA >>>
Vapeasy Armor Engine RDA >>>
Battery you would need:
3FVAPE - Battery >>>
The Vapeasy Meca DIY BF Squonk Mechanical Box Mod Clone is constructed from PC and stainless steel. You can find with the DIY Box a complete kit with screws and 2 plates. One superior plate for the connection with a One BF connector. It is entirely assembled with insulators and a connection strip. The plate is made in Stainless Steel and the connection strip. The inferior plate is also in Stainless Steel.
Main Features:
510 threading connection
PEI and stainless steel construction
Powered by 1 x 18650 battery (not included)
Silicone Squonker bottle capacity: 6.0ml
Atomizer connector diameter: 24mm
Installation of your DIY Box Mod
Screw the battery tube onto the lower plate
Place the button in the body
Insert the top plate on the body
Screw using the two screws provided
Insert the BF bottle
Insert your battery into the tube, positive pole upwards
Screw the battery caps
Your DIY Box is ready
There are three colors for you to choose, so which color is your favourite? If you want to get one, you can come here:
Vapeasy Meca DIY BF Squonk Mechanical Mod Clone(Replica) >>>
Recommended RDA:
Wotofo Profile RDTA / RDA >>>
Vapeasy Armor Engine RDA >>>
Battery you would need:
3FVAPE - Battery >>>