Become a Patron!
Lost Vape Efusion DNA 200
- Thread starter JamesV
- Start date
Make sure the file extension is correct. A lot of times to post it for downloading the file extensions are changed to .txt.
What you want is:
The .csv will be either a wire/material profile or a battery discharge profile, the first you would load in the Materials tab, the second in the Mod tab under Manufacture Settings. The device settings have an .ecig file extension and the 8 profiles have an .ecigprofile file extension.
Cheers,
Steve
What you want is:
The .csv will be either a wire/material profile or a battery discharge profile, the first you would load in the Materials tab, the second in the Mod tab under Manufacture Settings. The device settings have an .ecig file extension and the 8 profiles have an .ecigprofile file extension.
Cheers,
Steve
Last edited:
1. What version of Escribe and Firmware do you have? The latest test firmware is "Firmware 2016-02-29 EScribe 1.0.42". The newest recommended is "Firmware 2015-10-21 EScribe 1.0.35.2" You can find the Escribe version in the help tab at the top under about. The firmware version can be seen in the device manager in the lower right corner. You can download either one here.
PS I'm running the latest test firmware and like it alot.
Take a look at this thread to see all the new options the test firmware offers. Here's the link.
2. I thought the Efusion came pre-configured from the factory, Doesn't it? If so, I'm not sure why you are trying to run the .Ecig file. It's neither here or there since you should be able to if the mood strikes. I would suggest making sure you have the latest version of Escribe and firmware installed first and then go from there.
Cheers,
Steve
PS I'm running the latest test firmware and like it alot.
Take a look at this thread to see all the new options the test firmware offers. Here's the link.
2. I thought the Efusion came pre-configured from the factory, Doesn't it? If so, I'm not sure why you are trying to run the .Ecig file. It's neither here or there since you should be able to if the mood strikes. I would suggest making sure you have the latest version of Escribe and firmware installed first and then go from there.
Cheers,
Steve
Last edited:
JamesV
Member For 4 Years
Yes I had just installed escribe from the evolv site the day I tried to load the .exig file Imit does come preconfigured. But the vapordna site says on the efusion dna 200 page says load the file with the newest updates. But it still says The file is unsupported. Maybe the firmware isn't the newest and it has to be? But it let me change the battery settings to the correct one like Efusion says too