Mod heating up

[Casey9667]

i have the smok alien 220 with a stro mini v2 rda, which I just got today, I have to staggered staple coils in there that reads .104 ohms running at 100w. The whole rda heats up pretty quickly but the top of the mod heats up pretty hot aswell. It has a pbc temp and I don't really like it going over 45 degrees (Celsius). I'm almost scared to go over that. Any input?

 

[BKTOAD]

Build higher is the only advice I have to keep the heat down.

 

[SirRichardRear]

i have the smok alien 220 with a stro mini v2 rda, which I just got today, I have to staggered staple coils in there that reads .104 ohms running at 100w. The whole rda heats up pretty quickly but the top of the mod heats up pretty hot aswell. It has a pbc temp and I don't really like it going over 45 degrees (Celsius). I'm almost scared to go over that. Any input?

heat transfer is pretty normal. your atty is getting hot and making the mod hot. your also pretty much at the amp limit of the chip itself with that low of resistance. You could buy a heatsink. they are cheap and should help cool off the mod.