Fuck me side ways. And here I was thinking we'd peaked the wattage war. Oh well.
Not a bad design though, imho
Not a bad design though, imho
Become a Patron!
Move over Primus. Make way for the 400w Smok Power Engine Mod!
- Thread starter PrinceWizdom
- Start date
What do you put on it to vape at 400 watts? And why would a sane person aim that much potential at the back of their throat and push the button???
Inquiring minds would like to know...
Inquiring minds would like to know...
Was about to post about this. I understand something like the HoG but as a regulated device, I just don't get this fist filler. At least to me, this would be so uncomfortable just to get a little more battery life at a time.
It definitely feels like something you would release when you just say fuck it.
Also all that power & the limiter is still .1
It definitely feels like something you would release when you just say fuck it.
Also all that power & the limiter is still .1
Last edited:
Jesus. My local vape shop has a couple of power junkies working there. My last visit they were using the new primus. They usually elan their mods wide open but I think they were making the primus at around 250 or so. I took a cape on it and it was HOT. No clue what you would do with 400 watts
Actually unless I am very much mistaken, even the HOG v2 was a 2s2p. But to get 400w I'd assumed you'd need to run this in 4s. Oh well.
meant it as a comparison of just a 4 battery mod. I get the usage of a 2s2p but a 4 bat reg just doesn't make much sense to me
Love it!
It's definitely on the must have list.
400W is like having 600bhp on a car. It's there when you want it!
Put 4 LG HG2s in there and vape at 50W for a week...
Put 4 LG HB6s in there and vape at 400W for a few hits...
If it's Nuvoton based like the Primus, it will give low ohm warning < 0.1 ohms but if you switch to TCR it will fire those lower builds which is nice. 400W "preheat" will be a BEAST from a "consumer turnkey" mod that doesn't break the bank.
Of course it's all speculation at this point, it could use a different chipset, err too far on the cautious side and be a real POS.
Can't wait for (hopefully) Daniel at DJLsb to review one!
It's definitely on the must have list.
400W is like having 600bhp on a car. It's there when you want it!
Put 4 LG HG2s in there and vape at 50W for a week...
Put 4 LG HB6s in there and vape at 400W for a few hits...
If it's Nuvoton based like the Primus, it will give low ohm warning < 0.1 ohms but if you switch to TCR it will fire those lower builds which is nice. 400W "preheat" will be a BEAST from a "consumer turnkey" mod that doesn't break the bank.
Of course it's all speculation at this point, it could use a different chipset, err too far on the cautious side and be a real POS.
Can't wait for (hopefully) Daniel at DJLsb to review one!
Yup. Now i wait for him and bogan to review something before i get it. Only 2 reviewers left that i trust.Love it!
It's definitely on the must have list.
400W is like having 600bhp on a car. It's there when you want it!
Put 4 LG HG2s in there and vape at 50W for a week...
Put 4 LG HB6s in there and vape at 400W for a few hits...
If it's Nuvoton based like the Primus, it will give low ohm warning < 0.1 ohms but if you switch to TCR it will fire those lower builds which is nice. 400W "preheat" will be a BEAST from a "consumer turnkey" mod that doesn't break the bank.
Of course it's all speculation at this point, it could use a different chipset, err too far on the cautious side and be a real POS.
Can't wait for (hopefully) Daniel at DJLsb to review one!
Finally a reason to get a Alliance FatBoy
Unless SMOK partners with hohm tech/DNA/Yihi, the possibility of that happening is almost zero. And the possibility of Smok partnering with any of those companies? Well...
0.06ohms @ 400w. Crazy.
Ridiculous isn't a strong enough word. Seems like it's for people who want to have bragging rights suffering from SPS. Mine (mod) is bigger than yours. 
Cheers,
Steve
Cheers,
Steve
There is one other type of person that would buy one.
A collector.
I have mods that I knew when I purchased them that they wouldn't get much usage.
(however 99% of all my mods get used through out my rotation, there are just a few that I felt I needed without intent on them being in that rotation)
I wanted them just because they would look good on my shelf next to another mod.
Maybe I needed it because the color worked well in the order the rest of them were in.
I have the 300 watt Primus and the Spartans.
I'll tell ya now due to their look, size, and weight, they will not receive much usage now that they have been through their testing stage.
So while I CURRENTLY am not interested in this 400 watt mod, that can easily change in a short period.
Especially if a time comes where there doesn't seem to be anything else that I don't have but in the mood for a new one.
All that said, there is no need what-so-ever for anyone to USE this mod at it's max settings.
Then again, maybe the lock ness monster or big foot is into vaping.
A collector.
I have mods that I knew when I purchased them that they wouldn't get much usage.
(however 99% of all my mods get used through out my rotation, there are just a few that I felt I needed without intent on them being in that rotation)
I wanted them just because they would look good on my shelf next to another mod.
Maybe I needed it because the color worked well in the order the rest of them were in.
I have the 300 watt Primus and the Spartans.
I'll tell ya now due to their look, size, and weight, they will not receive much usage now that they have been through their testing stage.
So while I CURRENTLY am not interested in this 400 watt mod, that can easily change in a short period.
Especially if a time comes where there doesn't seem to be anything else that I don't have but in the mood for a new one.
All that said, there is no need what-so-ever for anyone to USE this mod at it's max settings.
Then again, maybe the lock ness monster or big foot is into vaping.
Wonder how fast that Kayfun will tap out
Wonder how fast that Kayfun will tap out
Somewhere in the vicinity of my home....15 seconds after screwing on the KFM3...
