Nebox by kanger tech usage and help plz

[DEATHquidox]

Hey guys kinda new to this but I know alot. The nebox is a temp controlled mod with a Built in tank its very nice it goes from 7-60 watts.

Problem im having is that it drips out of the bottom without me using the device sometimes and it wastes e-juice sadly if anyone has a fix to this please let me know. Or any info at all will be helpful like if im doing something wrong or anything just help haha, thanks guys

 

[AmandaD]

Hey guys kinda new to this but I know alot. The nebox is a temp controlled mod with a Built in tank its very nice it goes from 7-60 watts.

Problem im having is that it drips out of the bottom without me using the device sometimes and it wastes e-juice sadly if anyone has a fix to this please let me know. Or any info at all will be helpful like if im doing something wrong or anything just help haha, thanks guys

It's a common problem according to other threads I've read. Mine will do it when it's less than half full - solution for me is to store it upside down!

 

[DEATHquidox]

It's a common problem according to other threads I've read. Mine will do it when it's less than half full - solution for me is to store it upside down!

Awesome. Thankyou.

 

[DEATHquidox]

It's a common problem according to other threads I've read. Mine will do it when it's less than half full - solution for me is to store it upside down!

What do u keep ur tank at? ? 75%? Cause if you fill it all the way it leaks to

 

[AmandaD]

What do u keep ur tank at? ? 75%? Cause if you fill it all the way it leaks to

Mine doesn't seem to leak when it's full, but I've only had it a few days!

I'm used to leaking from this type of thank though, because i have three egrips, and I have to store them all upside down or they all leak through that bottom airflow hole.

 

[DEATHquidox]

Mine doesn't seem to leak when it's full, but I've only had it a few days!

I'm used to leaking from this type of thank though, because i have three egrips, and I have to store them all upside down or they all leak through that bottom airflow hole.

Well thats lame, sucks because I was gonna use this as my all day vape ;-; do you know if the
Vaporesso Target 2 VTC 75W MOD Kit

Is any good?

 

[AmandaD]

Not familiar with it - sorry!

I think the Nebox is still good for many for an all day vape - just don't put it right side up in your pocket However if it's really leaking that badly I'd get a replacement from the place you bought it.

 

[DEATHquidox]

Not familiar with it - sorry!

I think the Nebox is still good for many for an all day vape - just don't put it right side up in your pocket However if it's really leaking that badly I'd get a replacement from the place you bought it.

It leaks really bad when I open it and its really low. Ill turn it upside down and she it and nothing will come out. Then ill close it. Open it later and it just poors out and its empty. I enjoy it I do, but the leaking Is annoying and gets everywhere sadly but ill remember to keep it full from now on thankyou for the tips

 

[DEATHquidox]

It leaks really bad when I open it and its really low. Ill turn it upside down and she it and nothing will come out. Then ill close it. Open it later and it just poors out and its empty. I enjoy it I do, but the leaking Is annoying and gets everywhere sadly but ill remember to keep it full from now on thankyou for the tips

You know it was probably the coil that had some in it and when I closed it it forced it out and bleh. Thats probably what happened

 

[Robert B]

You might get more views & feedback if this thread were in the regulated mod section instead of the mech section... @Huckleberried

 

[DEATHquidox]

You might get more views & feedback if this thread were in the regulated mod section instead of the mech section... @Huckleberried

Yeah ive been all over the place and I dont know how to move it, but I didn't realize the temp control was under this fourm

 

[dre]

If you use the square coils it helps to stop leaking. Mine has yet to leak but I use the rba coil only. I like it so much my dna200 mod hasn't been touched since I got the nebox.

Sent from my XT1585 using Tapatalk

 

[DEATHquidox]

If you use the square coils it helps to stop leaking. Mine has yet to leak but I use the rba coil only. I like it so much my dna200 mod hasn't been touched since I got the nebox.

Sent from my XT1585 using Tapatalk

Holy crap yes. Do you run any build or at you just running the one on the little how to guide it comes with?

 

[Robert B]

Yeah ive been all over the place and I dont know how to move it, but I didn't realize the temp control was under this fourm

You can't move it. A moderator has to move it. I summoned @Huckleberried or @Whiskey for you. Hope you get it dialed in.

 

[dre]

The one that's in it is pretty good. Give it a go just wick it correctly. It's good around 32w to 40w.

Sent from my XT1585 using Tapatalk

 

[DEATHquidox]

The one that's in it is pretty good. Give it a go just wick it correctly. It's good around 32w to 40w.

Sent from my XT1585 using Tapatalk

Ill give it a go been wanting to play with coils lately anyways seems fun. Thanks man

 

[Huckleberried]

You might get more views & feedback if this thread were in the regulated mod section instead of the mech section... @Huckleberried

As you wish.

 

[Jah]

Im having the same issue with mine and using the supplied round ssocc coils. I shelved it because of this, @dre Ill try the square coils and RBA...i really want to like this thing lol

 

[dre]

Seems like only the ni200 coil leaks the .5 n80 coil hasn't leaked a drop. The nikel always gurggled and leaked

Sent from my XT1585 using Tapatalk

 

[Lost]

Seems like only the ni200 coil leaks the .5 n80 coil hasn't leaked a drop. The nikel always gurggled and leaked

Have you taken one apart yet? Looks like they should all be leaking/not working. But I know nothing about vertical builds, so there's that. My w. did try the .5 and it worked shockingly well for maybe a week straight. Wayyyy longer than any other Kanger attys. Haven't used the .15 yet.

So far, we haven't had a drop leak out of the Nebox. RBA works well. Second round of cotton. Same coil, cleaned in place.

 

[dre]

Not yet but I will. I use to rebuild the square coils all the time.

Sent from my XT1585 using Tapatalk

 

[Lost]

Not yet but I will. I use to rebuild the square coils all the time.

Can't remember if the squares are vertical or not. If I DO try a vertical in that tiny thing, my initial thoughts are that I'd have to cut the inside diameter of the coil down to at least 3mm so I can get the cotton in place. More YouTube I guess.

 

[Jah]

Can't remember if the squares are vertical or not. If I DO try a vertical in that tiny thing, my initial thoughts are that I'd have to cut the inside diameter of the coil down to at least 3mm so I can get the cotton in place. More YouTube I guess.

the newer square occ are vertical, i still see some of the horizontal ones from time to time, but usually at discount

 

[Lost]

Need to find out how many of you with Nebox leaking problems are only experiencing them with the RBA.

My wife has had no issues with the prebuilt coils, and no issues with the RBA... at least until she tried to change the cotton herself. THEN it leaked.
I checked her efforts. Overall, she did an excellent job for a first time with cotton. She had followed the instructions in the manual, didn't overstuff the coil, and tightened all the threads properly. She said she covered the RBA holes with the cotton, but I know that she wasn't as obsessive as I have been about fiddling with the cotton ends, getting them juuuuust so.

As long as something odd hasn't happened to her unit in the week since I last changed out her cotton, this is a slam-dunk explanation: The atty flooded. The air hole is right under the coil and the juice just started leaking out to the bottom.

I'm going to play with cotton right now, and have her watch what I do. Leaks or not, I'll report back.

 

[jasonculp]

I have been using mine daily for just under a month (11/14). I have only had one leak and it was with the RBA. I tried to scrimp on the cotton a bit and it worked fine for about 4 days, on the 5th I let it get pretty low and it started seeping a bit out of the air hole. I have since done a bit better at wicking and it has not given me a minutes trouble (in the leaking department). I have very little experience using the pre-made coils. I have been having much better luck, flavor, and performance using the RBA and Ti coils.

Overall I have had pretty good luck with this little mod. It doesn't do the best job in temp mode, my D2 and Evic VTC mini are better. It doesn't have the best airflow, I much prefer my Cthulhu V2, it is just about right for me. All that being said, size, weight, juice capacity, and acceptable performance, I am really pleased overall with this mod.

 

[Lost]

Update. I showed my w. how I've been replacing cotton... how you can push the cotton down from the top of the RBA, but it still won't completely cover the holes. There's still a tiny bit at the bottom of the holes where juice can flow in. She hadn't realized that. No repeat of leakage so far.

Not concerned about the extra minute or two fidgeting with the cotton. Compared to the surgeries I have to perform on my Subtank Mini, this is a cakewalk.

To make sure it's seen this is a massive design fault with kangertech. People are wasting there money on buying this tank

If it's just the RBA design, yes, that's still Kanger's fault. But I'm still not willing to discount the Nebox itself. I don't know if it's the different metal/coil type or not, but I've been replacing FAR less cotton and rebuilding far less attys lately. Airflow is good. Taste is good. That tank is massive. And after seeing a teardown, I'm not worried at all about the tank cracking.