Hello ive been vaping for like four monthd but im obssessed and dove headfirst into it all. the past two months ive been doing alot if rda builds but i recently returned my ipv 5 and in the inbetween period ive been building on a mini rba for my nebox. ive been using a triple twisted 24g kanthal a1 build thats been working amazing but i recently got free 28g Ni200 wire so i built with that to finally experience TC mode. It started put awesome but all of a sudden my nebox started reading the coil at 9.99ohms. Since then ive built five more coils on 3 different mini rba decks and also tried a premade kangertech ni .15 ohm coil and it reads all of them at 9.99ohms. ive done the coil test of twisting off the leads to make sure they are stable amd tight, the leads werent touching the metal anywhere, the coil was elevated off the base, they were perfectly spaced wraps, it was all prestine. it just wont read Ni. But yet the rba deck with the kanthal build reads just fine. Does anyone know whats wrong with it?
Become a Patron!
Nebox Not Reading Ni200
- Thread starter ACataldi
- Start date
my nebox wont read the ni200 build in my mini rba anymore and it wint read the kangertexh premade .15 ohm ni coils anymore eiher. ive tried a million diff nickel builds in three different mini rba decks and it registers at 9.99 ohms everytime. it will however automatcally switch to tc mode when i put the ni builds in so its reconizing ni200 but its not reading ohms. the coil leads are tight amd not touching the chimney or deck and the coil is sturdy and the wraps are perfectly spaced. the twist is it will still read my kanthal builds on those same rba decks. anyone know whats wrong?
I did a bunch of times that's not the problem the problem is it's really just won't read nickel wire and occasionally it won't even read the RBA with the Kanthal wire in it it won't even read regular pre-made coils for KangerTech I don't know what's wrong but I think it has with the base for the nebox