Hi Vaping Underground members, In this review I take a look at the Pagee Pod Kit from Nevoks. The Pagee Pod Kit was supplied for the purpose of this review by Agnes from Nevoks.
https://www.nevoks.com/products/pagee/
Introduction
In their short existense Nevoks have become pod device specialist and have shown as their devices have progressed they listen to feedback in an attempt to bring the vaper products they require! I have only just reviewed the Veego 80 which was a SBS Pod Mod with 510 thread adaptor and with the Pagee we see a return to the "Credit Card" style pod device which we saw about 18months ago!
Like the Veego 80 the Pagee ticks a lot of boxes and also brings us what's claimed to be the first 360 degree bottom adjustable airflow! It offers both button activation and Auto Draw, has adjustable wattage and is said to be for both MTL and RDL styles, Let's crack on!
_________________________________________________________________________
In The Box
Contents:
_________________________________________________________________________
Aesthetics and Ergonomics
The Pagee comes in cardboard box packaging with outer cardboard sleeve, on the front we have a picture of the device in the chosen colour and contents etc on the reverse. I received the Black version which has a Gunmetal Zinc Alloy chassis and Black Carbon Fiber effect panels both sides, the options are Black, Violet Rainbow, Dark Green or Space Grey, the colour refers to the Carbon Fiber effect side panels!
At only 70g the device is lightweight and even for what's become known as "Credit Card" style devices this must be the smallest I have used yet. We have a tinted flat pod with Delrin 510 drip tip, the drip tip is quite wide but has tapered sides to give it a flattened look! Below the pod on the main chassis on one side we have "nevoks" and on the opposite side "PAGEE", within the Carbon Fiber effect panel on one side we have a small screen!
Down the spine of the device we have towards the top a protruding rectangular fire button which has the Nevoks logo embossed into the metal button, below in a vertical position is the Type C USB port. Above the fire button we have an opening and then looking at the top rear we find the opening at the top of the spine comes out here forming a rail for the included lanyard to be attached, staying up top we also have a protruding rectangular wattage adjustment button.
Moving to the base we have branding, venting holes and to the leading edge a plastic adjustable dial for airflow control. The device just gets swallowed up in the hand so is ideal for when out and about!
_________________________________________________________________________
Pagee Specs and Features:
_________________________________________________________________________
What You Receive?
As well as the device and empty pod you also get 2 different coil heads which are the SPL-10 mesh coil 0.6ohm and the SPL-10 mesh coil 1.0ohm. You also receive paperwork, a short Type C USB cable and although it's not something I would use a rather nice lanyard!
_________________________________________________________________________
The Pod
The Pod is a flattish almost square shape and although tinted I had no issues seeing the juice level inside. Up top we have a wide drip tip with tapered sides which can turn to have in the most comfortable position depending on how you hold the device, it is also a standard 510 fitting so like me you could also fit an alternative if you prefer!
On the side where the pod slides into the bay so will be hidden from view we have a silicone bung which can be pulled out (while still remaining attached to the pod) to reveal a good sized fill port, as side fill ports go I had no issues being able to fill fast, mess free while completely filling the capacity!
Moving to the base of the pod we have the cylindrical opening for the coil head to be fitted, to one side we have a large magnet and to the other quite a large opening which will feed air to the coil head, this opening lines up with the airflow opening in the pod bay which gets fed by the bottom adjustable airflow control!
_________________________________________________________________________
The Coils and Fitting Them
The Pagee Pod deploys the usual plug and play method we see with most of the popular pod mod pods so the coil head just gets press fitted into the pod where it will be sealed via an O-ring and will also seal to the chimney via the top set of dual O-rings.
Two coil heads are included which are the SPL-10 mesh 0.6ohm coil head rated between 18w to 25w and the SPL-10 1.0ohm mesh coil head rated between 10w to 13w. The coil heads are the same that came with the Feelin, it's good to see this cross compatibility!
_________________________________________________________________________
Fitting The Pod
The pod fits via the vertical rail on the device and also strong magnets, we have no play whatsoever! Looking inside the bay we can see the Gold plated positive and negative contacts and large opening which leads right down to the airflow control. We also have two rectangular magnets and the opening to the membrane switch for draw activation!
_________________________________________________________________________
Review Continued:
https://www.nevoks.com/products/pagee/
Introduction
In their short existense Nevoks have become pod device specialist and have shown as their devices have progressed they listen to feedback in an attempt to bring the vaper products they require! I have only just reviewed the Veego 80 which was a SBS Pod Mod with 510 thread adaptor and with the Pagee we see a return to the "Credit Card" style pod device which we saw about 18months ago!
Like the Veego 80 the Pagee ticks a lot of boxes and also brings us what's claimed to be the first 360 degree bottom adjustable airflow! It offers both button activation and Auto Draw, has adjustable wattage and is said to be for both MTL and RDL styles, Let's crack on!
_________________________________________________________________________
In The Box
Contents:
- Pagee Device
- Pagee empty pod 2ml
- SPL-10 mesh coil 0.6ohm
- SPL-10 mesh coil 1.0ohm
- Type-c Cable x 1
- User Manual
- Warranty card
- Lanyard
_________________________________________________________________________
Aesthetics and Ergonomics
The Pagee comes in cardboard box packaging with outer cardboard sleeve, on the front we have a picture of the device in the chosen colour and contents etc on the reverse. I received the Black version which has a Gunmetal Zinc Alloy chassis and Black Carbon Fiber effect panels both sides, the options are Black, Violet Rainbow, Dark Green or Space Grey, the colour refers to the Carbon Fiber effect side panels!
At only 70g the device is lightweight and even for what's become known as "Credit Card" style devices this must be the smallest I have used yet. We have a tinted flat pod with Delrin 510 drip tip, the drip tip is quite wide but has tapered sides to give it a flattened look! Below the pod on the main chassis on one side we have "nevoks" and on the opposite side "PAGEE", within the Carbon Fiber effect panel on one side we have a small screen!
Down the spine of the device we have towards the top a protruding rectangular fire button which has the Nevoks logo embossed into the metal button, below in a vertical position is the Type C USB port. Above the fire button we have an opening and then looking at the top rear we find the opening at the top of the spine comes out here forming a rail for the included lanyard to be attached, staying up top we also have a protruding rectangular wattage adjustment button.
Moving to the base we have branding, venting holes and to the leading edge a plastic adjustable dial for airflow control. The device just gets swallowed up in the hand so is ideal for when out and about!
_________________________________________________________________________
Pagee Specs and Features:
- Power Range- 5W-30W
- Output- 3.3-4.2v
- Battery Capacity- 950mAh
- Size- 77.6*44.6*12.6mm
- Material: Zinc Alloy
- Weight- 70g
- Pod Capacity- 2ml
- Multiple Safety functions
- Type-C Fast Charging (2A/5v)
- 360 degree Airflow adjustment
- Button or Auto Draw
- 510 drip tip fitting
- Replaceable coils
- Old School Display
- Colours: Black, Violet Rainbow, Dark Green, Space Grey
_________________________________________________________________________
What You Receive?
As well as the device and empty pod you also get 2 different coil heads which are the SPL-10 mesh coil 0.6ohm and the SPL-10 mesh coil 1.0ohm. You also receive paperwork, a short Type C USB cable and although it's not something I would use a rather nice lanyard!
_________________________________________________________________________
The Pod
The Pod is a flattish almost square shape and although tinted I had no issues seeing the juice level inside. Up top we have a wide drip tip with tapered sides which can turn to have in the most comfortable position depending on how you hold the device, it is also a standard 510 fitting so like me you could also fit an alternative if you prefer!
On the side where the pod slides into the bay so will be hidden from view we have a silicone bung which can be pulled out (while still remaining attached to the pod) to reveal a good sized fill port, as side fill ports go I had no issues being able to fill fast, mess free while completely filling the capacity!
Moving to the base of the pod we have the cylindrical opening for the coil head to be fitted, to one side we have a large magnet and to the other quite a large opening which will feed air to the coil head, this opening lines up with the airflow opening in the pod bay which gets fed by the bottom adjustable airflow control!
_________________________________________________________________________
The Coils and Fitting Them
The Pagee Pod deploys the usual plug and play method we see with most of the popular pod mod pods so the coil head just gets press fitted into the pod where it will be sealed via an O-ring and will also seal to the chimney via the top set of dual O-rings.
Two coil heads are included which are the SPL-10 mesh 0.6ohm coil head rated between 18w to 25w and the SPL-10 1.0ohm mesh coil head rated between 10w to 13w. The coil heads are the same that came with the Feelin, it's good to see this cross compatibility!
_________________________________________________________________________
Fitting The Pod
The pod fits via the vertical rail on the device and also strong magnets, we have no play whatsoever! Looking inside the bay we can see the Gold plated positive and negative contacts and large opening which leads right down to the airflow control. We also have two rectangular magnets and the opening to the membrane switch for draw activation!
_________________________________________________________________________
Review Continued: