i bought a 5 pack
Just received mine today with extra coils and ni200. Coils are vert easy to find. I haven't vaped it yet but did unpack it and checked it out. Seems very well built and threads are incredibly smooth. Coils look very nice too. I had a full and active day today so tomorrow I will get it filled and out for a test spin. Oh yea the black version is super sharp looking.
I received a new Mini base today, with a new ni200 it ohmed .12 cold. I tore apart the old base, the insulator showed sine's of being burnt at the top, also used two pares of visegrips and took the thing apart, I found a sliver of stainless in the bottom. I have spoke with Kanger wholesale and they told me they have had complaints from quite a few customers, I think depending on how tight you screw the tank on the mod the insulators compress and somehow change the resistance. I never remember having this trouble with the .50 Kanthal, poor quality control and design flaws with the ni200. Kanger will sooner or later fix it. The woman I spoke with at Kanger told me they had been having these issues with their new K Boxes. Try tighting the thing on the mod and then back it off a half turn, that seems to work sometimes.
Are you using a IPV4?
Love my Herakles. But try the uwell crown, or the smok tfv4
How is the draw, air flow as compared to the horizontal Kanger ni200 coils, seems that Kanger changed something on the original ni200, for me the draw has become tighter and I mean the past three boxes have been much tighter than I remember as apposed to when I first tried the Kanger ni200.
That black tank is sexy as hell....
Kanger ONLY has horizontal nickel coils. No vertical nickel yet.
Thanks Vapin4Joy. I just ordered 4 myself. Haven't even tried the nickel horizontal yet, (just been doing the rba) but love the vertical kanthal.
Not yet. I will be ordering some today.
I find that I am running my tank probably a bit higher than most 510 F, at 43 W. So my coil life has been pretty short but it is great up to that point. I have the RBA all cleaned and ready to be built. Hopefully I will try to get to that tonight lolol.... I would be interested in hearing your thoughts once you get the NI200's
Very Cool. I picked up the VCT, RBA and NI200's all at one time from Sweet-Vapes. One stop shopping lolol. I may try the Kanthal coil here just to see what kind of power they need to give the vape I like. The NI200 are .25 so I was using it around 40+ watts. Below 35 seemed to be too anemic for me. Any of the other .25 Ni200's that I used (Artic etc) were always above 40 so I thought that would be best.I tried stock .5 kanthal coil. Works well at 30w. I will share my thoughts on the ni200 with you when they come in. Efun had them for 10.99
The Kanger 0.2 coils are wrapped with nichrome.
You got it, My Vapor Store has them, my 5 should be in my hands tomorrow.
Which Subtank are you running? Sorry i mightve missed a post somewhere's.
You will need a temp sensing mod like the ipv4, ipv3 li, vapor shark, ni200 is very low ohm. Firing a ni200 coil on a standard regulated mod is not safe, it will fry your batteries.
I agree, I have the Freemax ni200 coils they are great, like I said, Kanger has issues I have spoke with Kanger tech they admit that the grommet at the base has a design flaw, I was hoping the vertical would have a fix, guess not.
