Newest Ecig: ELEAF IStick QC 200W

[Cacuqecig]

The Eleaf iStick QC 200W Kit is an interesting design that manages to produce top power using a built in, 5000mAh LiPo battery. Its high-tech design is relatively compact, with the full kit measuring only 52mm*25mm*139mm overall and weighing only 260g, with the full kit measuring only 52mm*25mm*139mm overall and weighing only 260g. The device comes with native support for Nickel, Titanium and Stainless Steel wire and can be operated in TC mode with a resistance range of 0.05-1.5ohms respectively. In addition to this great functionality, the iStick QC 200W mod also comes with a handy preheat function and 1.5A quick charging capability to ensure minimal downtime during recharge cycles. This full kit sure can give you a very special vaping experience .


From a design perspective, the QC 200W looks almost identical to the Eleaf Istick Nano, but with a larger form factor. The device features a modern look with many available colors that include black, red, silver, brown, green and wood grain. With measurements of 52mm x 25mm x 83mm and a weight of just 195g, it is also quite portable for a high powered mod. The device comes with native support for Nickel, Titanium and Stainless Steel wire and can be operated in TC mode with a resistance range of 0.05-1.5ohms respectively. In addition to this great functionality, the iStick QC 200W mod also comes with a handy preheat function and 1.5A quick charging capability to ensure minimal downtime during recharge cycles.

The OLED is located on the side and allows for easy switching between modes via two adjustment buttons at the bottom of the control face. The menu can be customized with either a simple or detailed configuration. The simple menu shows resistance and wattage/temperature while the detailed interface has additional information such as voltage, puff time and total puffs.



The QC 200W is built with an internal battery that has a whopping 5000mAh capacity to permit very long battery life with steady output. The unit is recharged via the USB port and the process is faster with a charging current of 1.5A if you utilize the optional Avatar quick charger, instead of the included USB cable. There’s also amazing technology that ensures balanced trickle charging of the three built-in batteries that combine as the mod’s power source. Best of all, with an optional reverse charging adapter, the 25mm atomizer bezel at the top can be used as a power bank interface to charge smart phones, tablets and other USB devices in case of an emergency.

When sold as a full kit combo, this statement unit is paired with the new Eleaf Melo 300 Sub-Ohm Tank, which is rated for high power in the upper wattage ranges of 100-300 watts. Its unique capacity for massive vapor production is as a result of the advanced, ES Sextuple-0.17ohm Head that consists of six coils, which make it possible for the tank to accommodate higher wattage outputs and therefore larger vapor production. With the latest operating system installed, the Istick QC 200W is capable of 200 watts of maximum power and will work in temperature mode down to 0.05ohm in the range of 200 to 600 Fahrenheit.



The following output modes are accessible as presets: power mode, smart mode, three temperature control modes (nickel, titanium, stainless steel) and three memory slots for TCR operation. There’s also a preheat function to permit faster initial coil heating. Firmware is also upgradable via the USB port in case there’s a new operating system and there’s a reset button if there’s a software glitch that results in a failed update.

Check more Eleaf Products at cacuqecig here >> http://www.cacuqecig.com/en/brand/eleaf.html