Newest Ecigs: Kanger Dripbox 2 Starter Kit.

[Cacuqecig]

Kangertech is back at it again with the updated and more powerful version of the popular Dripbox Kit which is called the Kanger Dripbox 2 Starter Kit. The Dripbox 2 Starter Kit features the same "squonker" design or also known as a bottom feeder to provide a convenient dripper experience without the hassles of dripping. The Dripbox 2 Mod now features a variable wattage output from 5 to 80 watts and also features a temperature control mode which supports Nickel 200, Titanium and Stainless Steel wire in temperature control mode.The new Dripbox 2 still features a dripping experience in a squonker setup but has an increased output of 80 watts. The Subdrip 2 RDA has dimensions of 26mm x 22mm and is made of stainless steel.

It features a 510 threaded connection type and has adjustable airflow. Airflow can be set for either direct-to-lung or mouth-to-lung vaping. The Subdrip 2 RDA is built with a screwless two post deck that is simply pressed to install wire for easy coil building. Make your own coil or use the included 0.2Ω kanthal coil. Kanger DRIPBOX 2 Kit inherits DRIPBOX design and makes unique innovation, which includes SUBDRIP 160 and MBEBOX. It features adjustable airflow and integrated battery. It uses 7ml ejuice capacity and OLED display, which shapes temperature control and high power output 80W. With novel design and upgradeable firmware, it will be more popular and attractive by MTL and DL vaping.



Following up on the success of the original Dripbox, Kanger does not reinvent the wheel but instead fine tunes a phenomenal product within a steps short of perfection. The ultimate fill and go product packs enough juice to get you through a day of vaping and provides you with the flavor only RDA can without having to constantly drip liquid onto your wicks. Give your Dripbox 2 a squeeze and its ready to keep producing delicious clouds. The quality of the Dripbox 2 cannot be overstated.

80W Kanger Dripbox 2 TC Starter Kit comes with SUBDRIP 160 and MBEBOX, MBEBOX integrated battery and tank with capacity of 7.0mL. User can easy squeeze the tank and pump the appropriate Juice from the MBEBOX to SUBDRIP 160. With temperature control and high power output, user can enjoy the fun of dripping. In additional, replacement drip coil make the coil changing much easy.The Dripbox mod measures 84mm x 57mm x 23mm and is constructed from zinc alloy. It is built with a bottom e-juice feeding mechanism, also known as a squonker design, which allows for a dripper experience without dripping hassles.


With this setup, juice travels from an internal mod bottle to the RDA to saturate the cotton. Inside the mod, you will find a 7ml e-juicebottle that allows for vaping without refills for extended periods and is refilled from the top for convenience. On the control face, you’ll see an OLED that features an easy menu and a USB charging port for firmware upgrades and to charge the single 18650 cell that powers the unit.

The mod will put out up to 80 of power, supports atomizers with resistance of only 0.1Ω and has temperature control capability with allcoil types (Ni, Ti, SS) from 200°F to 600°F.The Dripbox 2 Kit features the Subdrip 2 RBA and a Dripbox 2 Mod all together in one convenient kit. The Subdrip 2 RBA supports replaceable 0.2ohm cotton drip kanthal coils which are easily replaced or can be rebuilt to your own personal preferences. The Subdrip 2 RBA can also be filled from the top as well. The Dripbox 2 Mod can fire up to 80 watts and has a incredible capacity of 7ml due to the bottom feeding design. The Dripbox 2 requires (1) 18650 High Amp Battery (sold separately) and features a Micro USB charging port.

The Subdrip 2 RBA features a juice delivery mechanism at the bottom of the 510 threads which allows e-liquid to saturate the cotton. E-liquid is simply squeezed/refilled using the e-liquid bottle located at the bottom of the device to saturate your cotton and is now ready to be vaped for massive flavor. The Subdrip 2 RBA now features a screwless two post deck for easier and improved builds. You may press down on the posts to release and change your coils. No need to hassle yourself with screws anymore due to this screwless design.