Become a Patron!

Noob to building.

freakknight1

Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
I'm getting into building my own coils. I know the basics on how to actually do it but still learning about different types and gauge of wire. I currently have a dual coil rda subohm tfv4. I'm looking to build a .2ohm dual coil setup. What's the best wire to use as a beginner. My current mod is segelei 75w tc box.

Sent from my SM-G920P using Tapatalk
 

smacksy

Platinum Contributor
Member For 4 Years
I'm getting into building my own coils. I know the basics on how to actually do it but still learning about different types and gauge of wire. I currently have a dual coil rda subohm tfv4. I'm looking to build a .2ohm dual coil setup. What's the best wire to use as a beginner. My current mod is segelei 75w tc box.

Sent from my SM-G920P using Tapatalk
Hi
I'd try 24g Nichrome.. About 8 wraps on a 3mm bit should be around .2-25 ohms..Other folks will chime in with their suggestions as well..

Sent from my XT1080 using Tapatalk
 

freakknight1

Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Any suggestions for wicking. I've heard Japanese cotton is one of the best.

Sent from my SM-G920P using Tapatalk
 

smacksy

Platinum Contributor
Member For 4 Years
I've used organic cotton for yrs in my RDA's..and still use it today..tried Japanese cotton and didn't like it, lol

Sent from my XT1080 using Tapatalk
 

smacksy

Platinum Contributor
Member For 4 Years
my Japanese cotton is organic. thought it all was...... hmmmmm
I'm talking about the organic cotton balls I get at Rite Aid or CVS...they're different than reg cotton balls like Ej was referring to at Walgreen's...organic is natural, wicks fast and a $4 bag lasts a long time (100 balls)..

Sent from my XT1080 using Tapatalk
 

freakknight1

Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
I might try the organic if it's that cheap lol. Does it say organic or unbleached or what

Sent from my SM-G920P using Tapatalk
 

lzbobcat

Member For 4 Years
Member For 3 Years
To get around .2 ohm, I usually do double coils with 24ga kanthal. I do 7 to 8 wraps. That's on the larger coil rod. The ohms will change a little with coil size. I never build under .2 myself.


Sent from my iPhone using Tapatalk
 

freakknight1

Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Sounds good I'll try that when I jet a chance. I just got an RDA so my tank build will be on hold lol. I'll be using the rda mostly but I'll be rebuilding the tank for situations like working on a car or driving on long trips

Sent from my SM-G920P using Tapatalk
 

VU Sponsors

Top