Ohmega BFT Plus

[Paratech]

This turns out to be a bit of a surprise to me.
I was unaware it was in production.










Drip Tip:
16.25mm tall
11mm will remain out of top cap
12.3mm ID tapering down to 9.5mm
15.64mm OD at top, 12.6mm that'll go into top cap

 

[Paratech]

Top Cap:
(this is a PULL OFF top cap)
29.83mm OD
12.69mm ID (for drip tip)
22.88mm OD at threading
8.49mm tall
5mm available for gripping to remove for filling





Chimney Section:
28.1mm tall
30mm OD at top
21mm OD at bell
Bell is 13.8mm deep to bevel and 15.6mm to chimney tube
Chimney is 10.6mm ID
Fill holes are 12.6mm X 4mm
Top ring is 3mm tall






Tanks:
29.05mm OD X 30mm tall for the straight tank
29mm expanding to 33mm OD to 30mm tall for the bubbled tank
These are NOT glass they are PMMA
Advertised as 8m; and 12ml
(using the bubble tank I was able to fit 15ml in)




Deck:
30mm OD
The 2.75mm post holes are 14mm apart
24.5mm from bottom of base to top of posts
Air flow holes are 8mm X 3.4mm ID and are raised 6.5mm above the base
The deck its self is 9.5mm thick
Adjustable air flow slots are 10.7mm X 2.8mm ID
Airflow adjustment ring is removable

 

[Paratech]

Coils from b_d_builders

 

[Paratech]

Alien Framed Staple 4mm ID from b_d_builders











Made of stainless steel
Velocity style deck
Phillips grub screws
4 wicking channels
Comes with both PMMA tanks (Poly(methyl methacrylate)
Dual adjustable air flow
Pull off top cap for top filling
Copper positive pin
Available in Black/Gunmental and Stainless Steel


Spare Parts include:
O-Rings, screws, and screw driver

 

[Paratech]

First wicking was a bit light and wanted to leak just a bit.
Rewicked (as shown in pics) and haven't had any troubles since.

The Ijoy Captain is reading it as 0.13Ω
Adjusted up to 120 watts and the flavor is amazing.
Naturally clouds fill the room making it difficult to see to type but that's expected.
Running with airflow wide open and it is working perfect for me.
Tested with airflow half open and it weakened the flavor just a bit and was twice as loud.

I picked this up from vaporworld for $31.50 during the Memorial Day sale.
Now that I've tested it, I should have ordered a few more.

Damn sure looks great on the Captain with the matchy matchy color.

 

[MWorthington]

Nice! I like it!

Great breakdown and review by the way.

 

[Paratech]

Nice! I like it!

Great breakdown and review by the way.

Thanks

 

[r055co]

Good review, for me the plastic tank is the deal breaker.

 

[Paratech]

Good review, for me the plastic tank is the deal breaker.

I was a bit hesitant myself but after checking it out, it's stronger than glass.
I'm not big on the frosted part but I can still easily see how much juice is in there.
I bet if I were to spend the time comparing it to some of my other 200+ tanks I could find another glass to fit it in the event it bothered me too much.
But after using the ones in the following pic, it makes it easier to accept.

 

[r055co]

I was a bit hesitant myself but after checking it out, it's stronger than glass.
I'm not big on the frosted part but I can still easily see how much juice is in there.
I bet if I were to spend the time comparing it to some of my other 200+ tanks I could find another glass to fit it in the event it bothered me too much.
But after using the ones in the following pic, it makes it easier to accept.

View attachment 83610

I despise plastic tanks

 

[MrMeowgi]

Not a bad tank. Picked it up today.the pouring juice out was a shocker though.But all in all I like it.