Become a Patron!

Please recommend me new vape

Gents

Member For 3 Years
Member For 2 Years
Member For 1 Year
I had a Tesla invader 3 I loved it, but it broke. I'm looking to get a new one with same or better quality I'm not very sure of the market and whats best right now. I wanna stay around 40 - 60$ any suggestions are great thanks !

websites that you usually buy from ?

I understand my Tesla was unregulated and I'm not against a regulated mod.

I differently wanna stick with box mod
please no cyclones
 

lordmage

The Sky has Fallen. the End is Here.
Staff member
Senior Moderator
VU Donator
Gold Contributor
ECF Refugee
Member For 5 Years
RX200S ... is still the strong suite... or get that smok 4 18650 mod
Power Engine 400W Box Mod
 

f1r3b1rd

https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
at least 200w , around 40 - 60 bucks


https://101vape.com/vvvw-box-mods/1087-black-ipv400-200-watt-box-mod-by-pioneer4you.html
http://www.vapordna.com/Pioneer4you-iPV-6X-200W-Large-Screen-Box-Mod-p/ipv6xs.htm
or
http://www.vapordna.com/Wismec-Reuleaux-RX200S-200W-Box-Mod-Jay-Bo-Designs-p/rx200s.htm

coupon code JOE10 should get you 10% off that 2nd and 3rd link
all are 200w mods, the first and second use a yihi board the 3rd uses a joyetech board
first is 2 batteries, the first and second, the 3rd is 3, the third battery will give you a longer run time, and put less strain on the batteries at higher power.
 
Last edited:

Gents

Member For 3 Years
Member For 2 Years
Member For 1 Year
https://101vape.com/vvvw-box-mods/1087-black-ipv400-200-watt-box-mod-by-pioneer4you.html
http://www.vapordna.com/Pioneer4you-iPV-6X-200W-Large-Screen-Box-Mod-p/ipv6xs.htm
or
http://www.vapordna.com/Wismec-Reuleaux-RX200S-200W-Box-Mod-Jay-Bo-Designs-p/rx200s.htm

coupon code JOE10 should get you 10% off that 2nd and 3rd link
all are 200w mods, the first and second use a yihi board the 3rd uses a joyetech board
first is 2 batteries, the first and second, the 3rd is 3, the third battery will give you a longer run time, and put less strain on the batteries at higher power.
I like the 3rd link a lot , but I don't wanna run 3 batteries , any other suggestions?
 

f1r3b1rd

https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon

Gents

Member For 3 Years
Member For 2 Years
Member For 1 Year
True I just saw that after I posted yeah my boyfriend says I should get it, but idk I'm not convinced!
 

Paratech

I forgot
VU Donator
Gold Contributor
Member For 4 Years
SMOK Alien
Pioneer4You IPV6X
SMOK H-Priv
SMOK X Cube ULTRA

60% of the vendors on this link;
http://vapingunderground.com/threads/vendors-that-ship-from-usa.266680

The IPV5 is indeed good however the paint quality is poor (easily rubs off) it is a bit taller, and heavy.

Another option is Ijoy LUX.
It is a dual 26650 mod that comes with batteries.
About the lowest I've seen in the states in vaportekusa
 

Artdragon

Bronze Contributor
Member For 4 Years
Smok Alien
I second this. I just got it and so far, im in love with it. It was $80 at my local shop but we're kind of a "want it now" family and don't want to wait long for vape mail lol. I'm sure it's cheaper online. It comes with a smok baby beast tf-v8 and I put it on my kbox 120w. I'm not much of a tank kinda girl anymore, but the cloud production and flavor from it is excellent. And the alien itself works like a champ. I haven't run it dead yet since I've only had it 1 day, but I've been vaping half the day and only ran it down a little less than half way

Sent from my SM-G900P using Tapatalk
 

skt239

VU Donator
Platinum Contributor
Member For 4 Years
SMOK Alien
Pioneer4You IPV6X
SMOK H-Priv
SMOK X Cube ULTRA

60% of the vendors on this link;
http://vapingunderground.com/threads/vendors-that-ship-from-usa.266680

The IPV5 is indeed good however the paint quality is poor (easily rubs off) it is a bit taller, and heavy.

Another option is Ijoy LUX.
It is a dual 26650 mod that comes with batteries.
About the lowest I've seen in the states in vaportekusa

The magnets on the door of the IPV5 also have a tendency to pop out. One of mine fell off while on a hike and disappeared. Now I have to use it with a silicone sleeve and I hate silicone sleeves so it sits on the shelf.
 

MannyScoot

Diamond Contributor
Member For 4 Years
Get a DNA200...... This is mine.....IMAG2007_1.jpg

Or an RX200
IMAG1917_2.jpg

Or a 1590g pwm
IMAG2005.jpg


Sent from my 710C using Tapatalk
 

conanthewarrior

Gold Contributor
Member For 5 Years
I own a fair few mods(26 regulated mods) so can give you an insight into a fair few that you like the look of, the IPV5 as you mention is a very nice mod indeed.
It works well, TC is great on it, I own the SS version so haven't encountered any paint chips myself and can really recommend it if you like the look of it.

The RX200 as mentioned is another great mod-but the 510 pin is lacking and a weak area of the device, as with all Joyetech devices at the moment unfortunately. I haven't had a problem with mine though, I have in the past with the Cuboid but this was fixable.

The IPV5 does have a good board board by Yihi, my oldest dual 18650 mod uses a similar board, the Sigelei 150 (Original, I also have the TC though, and both are going strong after a lot of use).

In your price range the DNA200 is out of the question really, but you can still get a great mod in your price range. The IPV6X and SMOK Alien is a nice sized mod for a dual 18650 device-unfortunately these are 2 mods that I don't own at the moment though, so can't comment on them fairly.

I really do think this is a great mod though, the RX 2/3- if you are not sure if you want a single or dual 18650 device, you can choose, and in dual 18650 mode it is rather small-
vypcnsS.jpg
 
Last edited:

Gents

Member For 3 Years
Member For 2 Years
Member For 1 Year
I own a fair few mods(26 regulated mods) so can give you an insight into a fair few that you like the look of, the IPV5 as you mention is a very nice mod indeed.
It works well, TC is great on it, I own the SS version so haven't encountered any paint chips myself and can really recommend it if you like the look of it.

The RX200 as mentioned is another great mod-but the 510 pin is lacking and a weak area of the device, as with all Joyetech devices at the moment unfortunately. I haven't had a problem with mine though, I have in the past with the Cuboid but this was fixable.

The IPV5 does have a good board board by Yihi, my oldest dual 18650 mod uses a similar board, the Sigelei 150 (Original, I also have the TC though, and both are going strong after a lot of use).

In your price range the DNA200 is out of the question really, but you can still get a great mod in your price range. The IPV6X and SMOK Alien is a nice sized mod for a dual 18650 device-unfortunately these are 2 mods that I don't own at the moment though, so can't comment on them fairly.

I really do think this is a great mod though, the RX 2/3- if you are not sure if you want a single or dual 18650 device, you can choose, and in dual 18650 mode it is rather small-
vypcnsS.jpg
Thanks for the great info and help everyone! I'm her boyfriend she got the 2/3 in the cyan color witch I don't like so much, BUT! I really like how it feels with the 2 batteries in it , I cant stand it with with 3 battery pack door on, it's just way to big I have big hands and I still feel like it's to big in my hand. I use IPV3 atm and I'm looking at getting a new one now just because I'm jealous haha, I like the look of the IPV5 , but not convinced on what to get, I also checked out the Smok alien it's not bad looking but after watching a review there was a flaw in the fire pin. Faulty or loose. They say it might be fixed, but idk if I wanna take the risk because I'll be ordering offline.

That 1590g Pwm is not my style at all, but thanks for recommendation, I don't like the bulkiness. Does the RX200 or DNA200 run only on 3 batteries or 2? Also I as well wanna stay around 40 - 50$
 

conanthewarrior

Gold Contributor
Member For 5 Years
Thanks for the great info and help everyone! I'm her boyfriend she got the 2/3 in the cyan color witch I don't like so much, BUT! I really like how it feels with the 2 batteries in it , I cant stand it with with 3 battery pack door on, it's just way to big I have big hands and I still feel like it's to big in my hand. I use IPV3 atm and I'm looking at getting a new one now just because I'm jealous haha, I like the look of the IPV5 , but not convinced on what to get, I also checked out the Smok alien it's not bad looking but after watching a review there was a flaw in the fire pin. Faulty or loose. They say it might be fixed, but idk if I wanna take the risk because I'll be ordering offline.

That 1590g Pwm is not my style at all, but thanks for recommendation, I don't like the bulkiness. Does the RX200 or DNA200 run only on 3 batteries or 2? Also I as well wanna stay around 40 - 50$
Hi mate.

Ahh, you are lucky, your missus also vapes, same situation here- you won't have the stress a lot of people have of money going on a new mod and having to explain to her where it has gone lol.

I use the RX 2/3 in dual 18650 mode too as I prefer it that way. The RX200 only works with 3 batteries, while the RX 2/3 can use either, and with a DNA200 it really depends what model you go for, as it is quite an in depth mod with software that goes with it called Escribe, most run on 3 cell set ups but you can change it to run with 2, but in all honesty I don't think you will get one in the $40-50 price range, and also due to the nature of the mod it might not be best for a beginner, a lot of features would go wasted.

The IPV3 is a nice mod, I have the IPV 3 LI, a solid mod that again uses a board made by Yihi, that should last you for a fair time, but I know what it is like wanting a new device. As you already have the IPV3, the IPV5 would not be a bad choice at all, the SMOK alien is a lovely looking mod and I wanted one myself, but gearbest did not have any stock to send me one out, so they gave me a H-Priv instead(awaiting that now).

The alien is a nice size for a dual 18650 mod, similar to the IPV6X in shape. Out of all my mods, I have bought them online due to saving money, and have been OK in regards to customer service.

I would say that brings it down to either the IPV5 that you like, and also the SMOK alien. I would choose based on the form factor I preferred, SMOK's boards did not used to be very good at temperature control, but I hear the newer devices are a lot better, while the IPV 5 is again a Yihi board, which work fantastically.
 

Gents

Member For 3 Years
Member For 2 Years
Member For 1 Year
Hi mate.

Ahh, you are lucky, your missus also vapes, same situation here- you won't have the stress a lot of people have of money going on a new mod and having to explain to her where it has gone lol.

I use the RX 2/3 in dual 18650 mode too as I prefer it that way. The RX200 only works with 3 batteries, while the RX 2/3 can use either, and with a DNA200 it really depends what model you go for, as it is quite an in depth mod with software that goes with it called Escribe, most run on 3 cell set ups but you can change it to run with 2, but in all honesty I don't think you will get one in the $40-50 price range, and also due to the nature of the mod it might not be best for a beginner, a lot of features would go wasted.

The IPV3 is a nice mod, I have the IPV 3 LI, a solid mod that again uses a board made by Yihi, that should last you for a fair time, but I know what it is like wanting a new device. As you already have the IPV3, the IPV5 would not be a bad choice at all, the SMOK alien is a lovely looking mod and I wanted one myself, but gearbest did not have any stock to send me one out, so they gave me a H-Priv instead(awaiting that now).

The alien is a nice size for a dual 18650 mod, similar to the IPV6X in shape. Out of all my mods, I have bought them online due to saving money, and have been OK in regards to customer service.

I would say that brings it down to either the IPV5 that you like, and also the SMOK alien. I would choose based on the form factor I preferred, SMOK's boards did not used to be very good at temperature control, but I hear the newer devices are a lot better, while the IPV 5 is again a Yihi board, which work fantastically.

Hmm so its the IPV5 or RX2/3 I feel like I'm gonna get what she got (RX 2/3) it hits soooo nice man, just in black! At least I know what I'm getting and I haven't heard anything negative about it, also today the supplies for making my own juice should arrive today! as I'm new to making my own juice, but my buddy does it and will be helping me, I'm super excited !

I actually held that hammer of god at a vendor , it's just way to bulky, but the guy had nothing but good things to say abiout it. I just don't wanna carry something that big around
 

conanthewarrior

Gold Contributor
Member For 5 Years
Hmm so its the IPV5 or RX2/3 I feel like I'm gonna get what she got (RX 2/3) it hits soooo nice man, just in black! At least I know what I'm getting and I haven't heard anything negative about it, also today the supplies for making my own juice should arrive today! as I'm new to making my own juice, but my buddy does it and will be helping me, I'm super excited !

I actually held that hammer of god at a vendor , it's just way to bulky, but the guy had nothing but good things to say abiout it. I just don't wanna carry something that big around
Hey man.

You will be pleased with the RX 2/3-it is a lot of mod for not too much money. The only thing I suggest is if you are using a tank or RDA with a long 510 pin, put a washer between it and the mod-the only weak part I find of the Joyetech/Wismec mods is the 510 connection.
I have 6 though, and have never had a lasting problem with them, the only issue was on a cuboid, and I managed to sort that.

In regards to making your own juice, well done man! It is simple and will save you a LOT of money, and you get your own premium juice at a fraction of the cost of buying it.

The hammer of god looks cool-but I couldn't really recommend it to a newer vaper, and it is large. With the amount of cheap, and good regulated mods out there, you will be safer using something like the RX which is regulated, while the hammer is a mechanical mod. You may wish to try out Mechanical mods sometime, but for now I would stay regulated.
 

Warfcat

Member For 3 Years
Member For 2 Years
ECF Refugee
If your running anything over 50watts I would suggest a 3 battery 18650 mod or a single 22650 mod vw regulated ofc.

Sent from my HTC One using Tapatalk
 

Gents

Member For 3 Years
Member For 2 Years
Member For 1 Year
Yeah I'm dripping I run at 85w 3mg nic, I have a IPV3 li with filmware runs it to 220w I believe, but yeah I stay at 85w, I like the dual batteries, and the RX2/3 feels really nice in my hand I recommend checking it out. with just 2 batteries in it her clouds are just so nice with just a 3- 4 sec hits it's way cleaner then ipv3 in my opinion and my RDA runs 3 coils, but I want a new RDA or a tank

Got the juice today and it was cake making it I used the ejuice me up calc, it was simple I wanna get more flavors and check out some recipes online, but hell yeah! I saved tons of money .

any good sites with recipes? or where do you guys buy your flavors at? my buddy said he goes to AC moore? idk how much I trust that lol, I want quality and a nice selection
 

SirRichardRear

AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
hohm wrecker G2 is 171 watts, great temp control and under 70 bucks on ecig.com
 

SirRichardRear

AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
Yeah I'm dripping I run at 85w 3mg nic, I have a IPV3 li with filmware runs it to 220w I believe, but yeah I stay at 85w, I like the dual batteries, and the RX2/3 feels really nice in my hand I recommend checking it out. with just 2 batteries in it her clouds are just so nice with just a 3- 4 sec hits it's way cleaner then ipv3 in my opinion and my RDA runs 3 coils, but I want a new RDA or a tank

Got the juice today and it was cake making it I used the ejuice me up calc, it was simple I wanna get more flavors and check out some recipes online, but hell yeah! I saved tons of money .

any good sites with recipes? or where do you guys buy your flavors at? my buddy said he goes to AC moore? idk how much I trust that lol, I want quality and a nice selection
bullcityvapors.com is where i but all my flavors. great price and selection.

for recipes there is a DIY section here with a bunch
 

SirRichardRear

AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
whys it so cheap on that site and everywhere else it's 130 ish and up? I mean that worries me is there fake ones?
Because they have good sales. I got 3 from there. All good. So have a few others on the site. Also hohmtech has a great warranty Center and customer service

Sent from my SM-G935V using Tapatalk
 

SirRichardRear

AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
alright I mean i'm watching Mike vapes on youtube. he did a review and I mean I'm pretty sold haha , how could anyone pass this up
The only con with the mod is once you buy one you'll want to buy another one and another one lol

Sent from my SM-G935V using Tapatalk
 

VU Sponsors

Top