Problems if Course!

[Steve6]

Hey thanks for looking at my post. I recently bought an Aspire Pegasus its way to tech for my simple self and I am constantly having problems with it. It gurgles constantly, leaks all over the place and frequently spits juice into my mouth. I constantly take it in to the local vape shop for them to fix it and they always say its the coil. I get a new one and that day nothing doing it starts right back to leaking, poping and spitting. I have tried it on higher temp settings like the shop told me to do and also thicker liquid. But it is always doing this. If you have any idea what's wrong with the darn thing please help me out. If not can y'all suggest a better vaporizer? Thanks

 

[Whiskey]

The tank is whats causing the issues, what tank are you using and we can try to help

 

[Steve6]

Here's a picture of the damn thing idk what its specifically called I honestly don't know that much other than how to work it.

 

[Angrygod50]

I don't know that tank but usually leaking and spitting is from a bad seal causing the coil to flood. You need to form a vacuum above the liquid to hold it in. Check and clean the gaskets around the glass or what ever is between the top and bottom of the tank and the gasket at the base of the coil. and make sure everything is clean and tight but not so tight that you cant get it apart again. I think the kit comes with a Triton tank which is a top fill if so make sure the top is sealed good that could be were it has an air leak. Hopefully some one with that tank will have better suggestions. Good luck.

 

[Markw4mms]

Looks like an Aspire Triton. What coil are you using, and what wattage are you vaping?

 

[Markw4mms]

Moving this to Subtanks/Clearomizers/Glassomizers to get you more exposure for help.

 

[f1r3b1rd]

that is an aspire triton...
the two most common issues with any clearomizer will be flooding and dry hits. so replacing it can just move the problem; so, lets try and solve it with this one. The tank is one of the better ones for consistency.

try this:
- take the base off
-take the coil out
- blow any excess juice out of the coil and the coils airflow
- dry off the base
-re-insert the coil and make sure it is TIGHT as you can get it
- out the base back in holding the tank upside down
- Pray to the vapegods
- put it back on your mod and you should be good to go

 

[Markw4mms]

You might want to read over this thread, it might give you the answers you're looking for.
http://vapingunderground.com/threads/triton-mini-tank-leaking-sptiting-horrible.236467/

 

[centella4u]

@f1r3b1rd .... I like yr 7th step


Sent from my iPad using Tapatalk

 

[georgemeadal]

that is an aspire triton...
the two most common issues with any clearomizer will be flooding and dry hits. so replacing it can just move the problem; so, lets try and solve it with this one. The tank is one of the better ones for consistency.

try this:
- take the base off
-take the coil out
- blow any excess juice out of the coil and the coils airflow
- dry off the base
-re-insert the coil and make sure it is TIGHT as you can get it
- out the base back in holding the tank upside down
- Pray to the vapegods
- put it back on your mod and you should be good to go

couple more things

- make sure the coil has the tiny o-ring installed on the bottom
- when you top fill the tank make sure the juice flow control is turned to off
-the top fill / top airflow that just pulls out has a good o-ring. If the o-ring is missing or damaged it will allow air in from the top and juice will flow out the bottom