Quad twist question

[CashNVape]

I took two strands of 24g 316L twisted it, took two strands of 26g 316L twisted those then twisted the two strands together for a big twist. Unsure of twist pitch, probably like 0.9 or something. Just need to know what diameter and wrap # for a single 0.4ohm coil?

Sent from my SM-G900V

 

[SirRichardRear]

I took two strands of 24g 316L twisted it, took two strands of 26g 316L twisted those then twisted the two strands together for a big twist. Unsure of twist pitch, probably like 0.9 or something. Just need to know what diameter and wrap # for a single 0.4ohm coil?

Sent from my SM-G900V

Its gonna be trial and error. just remember that essentially each coil you make is 4 coils

 

[SirRichardRear]

deleted

 

[Neunerball]

I took two strands of 24g 316L twisted it, took two strands of 26g 316L twisted those then twisted the two strands together for a big twist. Unsure of twist pitch, probably like 0.9 or something. Just need to know what diameter and wrap # for a single 0.4ohm coil?

Sent from my SM-G900V

Try http://www.steam-engine.org/coil.asp?p=roundmulti&tp=0.9&r=0.4&str=4&awg=26&id=3

 

[HondaDavidson]

The wire wizard on steamengine will get you close..... but it won't do that as a twisted coil only parallel made with twisted wire


Sent from my SCH-I605 using Tapatalk

 

[nightshard]

I would say at 3mm ID around 20 wraps

 

[HondaDavidson]

I would say at 3mm ID around 20 wraps

and about 150watts to fire it.

 

[CashNVape]

I am thinking 9 wraps at 6mm?

Sent from my SM-G900V

 

[HondaDavidson]

I am thinking 9 wraps at 6mm?

Sent from my SM-G900V

Still a huge coil.... your baby will graduate college before it ramps up.

Sent from my SCH-I605 using Tapatalk