Quick Question Series Build

[vapin_5118]

I'm using omega 26 gauge wire and I did a 4mm 13 wrap dual coil build. It ohms out to .6 on my rx but when I had a single coil in I was at a .5 so I thought with duals it would ohm out to a .25 roughly. However my rx is showing a .6 HELP !!!!
I'm using Sony vtc5's and the wismec cricket/ anarchist box

 

[DED420]

Try re-tightening the leads, and make sure the coils aren't in contact with the posts. Did you also remove the atty before rechecking the resistance? (take RDA off mod, fire mod with no RDA, should display "No Atomizer" warning, then reinstall the RDA to the mod and see if it resets).