Become a Patron!
Quick question wicking
- Thread starter Angelv942
- Start date
A full thickness on the pads will be too much wicking. Remove the harder outside layers and get the amount of cotton you need from the fluffy inner cotton if using pads.
I used to rebuild Kanger Evod coils. You need a longer taper and a pointy pair of tweezers help to grab it and pull it thru.
Like I mentioned, twist the ends with wet fingers to a point. Also if it won't slide through you have too much cotton.
I don't generally make coils that small, but I use CB all the time. Just speculating here, but seems CB might be a bit to fluffy to get enough of it through such a small ID. You might try good old fashioned pads like KGD whose fibers are more densely packed.
I use unrolled cotton ball.. I just peal off a bit about 3 to 4x bigger than the coil. Lightly roll into cylinder twist an end insert and pull through. .
I forget bit aren't Evod heads the old protank style????
Sent from my SCH-I605 using Tapatalk
I forget bit aren't Evod heads the old protank style????
Sent from my SCH-I605 using Tapatalk
Pretty much, I think the height is slightly different.
I always built those as single verticle coil. Ie Aspire Nauti BVC style. Wicked with stuffed cotton fiber...... I quit smoking using a Protank 3 on a mech with a kick using NET juice. instead of buying a nautilus... I learned to build coils.
The stopping smoking was kinda an accident.... I just found I like vapor better.
Sent from my SCH-I605 using Tapatalk
I just built them as horizontal coils. I did however file out the wick slot a bit wider. Worked much better.
Yeah I opened up the channels also...
Never liked the dual coil factory builds but did prefer the dual coil protank atties. Found a 2mm to 2.5mm verticle gave better flavor. If i wanted more clouds then I did horizontal. As they allow for a bit more air flow.
To the OP..... the best vape purchase I have made yet... was upgrading from a clearmizer to a Kayfun 3.1....... a true rebuildable tank...... even though the 3.1 is not my best tank or even best Kayfun.
Sent from my SCH-I605 using Tapatalk
My best single upgrade has been the Subtank Mini.
Still vape on em after over 1.5 years.
RBA only.