So I want to share something I have searched for but have not found. I know that using my dripper until it dry hits will help control the annoying leakage when in your case or pocket. Sometimes, for me, I do not have that luxury. So to the world wide web I go in search of this blanking cap. I found vape bands but really I was wanting something I could use to make a tight fit and easily done. I wanted it to be small enough you could easily carry and make a good seal. To my surprise I found nothing. So I did what I do best and went to the hardware store to look for a few options I could make myself. I found some PVC caps which I was able to use without any modifications except spraying with paint to spruce it up a little. Actually the fit to well that it created a small amount of pressure which forced the cap to pop up and not seat well. I got my drill and the smallest bit and drilled a hole in the top center of the cap. Pressure released and it works great. I also bought some clear rubber hose that was a bit small. I was able to heat it slightly and stretched slightly and it's too fits well. Of course I still had an open end which I corrected by using a PVC threaded plug. This too works well but personally I liked the PVC cap mentioned above.
If anyone is interested in a photo of the two home made cap I can post them.
Even though these worked well I am still curious if maybe anyone had found a cape made for blanking a mod that is in line to what I made? Or maybe one of you has made a similar cap yet different from my two?
If anyone is interested in a photo of the two home made cap I can post them.
Even though these worked well I am still curious if maybe anyone had found a cape made for blanking a mod that is in line to what I made? Or maybe one of you has made a similar cap yet different from my two?