RDA Questions

[0rK1ngDAM Good Vapes]

I have been messing around with RDA's and RBA's and what I am finding it the vape they are producing is extremely hot to the point of being unbearable. Does anyone have suggestions of a few RDA's that do not produce extremely hot vapor?
Not extremely worried of price but being I want to buy about 3-4 some under $100.00
Thanks
DAM Good Vape signing off

 

[JXN]

Control the heat with your build and wattage. Pay attention to heat flux numbers you can get from
http://www.steam-engine.org/coil.asp

 

[0rK1ngDAM Good Vapes]

Control the heat with your build and wattage. Pay attention to heat flux numbers you can get from
http://www.steam-engine.org/coil.asp

ok I will take a look at that site
Thanks

 

[scarecrowjenkins]

What resistance are your builds? Generally a lower resistance will produce more heat. Which RDA are you using now? Maybe something more along the lines of a cloud chasing RDA would be better for you, something with a more serious airflow control to help cool the vapor down

 

[0rK1ngDAM Good Vapes]

between 0.37- 0.80
Aris Pro Drip from Council of Vape
The Trident V2
Patriot v1.2
and I have a I-Go W (1st one bought)

 

[freemind]

On top of what mod?

 

[Rayne]

Give something like a TugBoat/Dark Horse/Doge or any other higher airflow RDA a try. I'm thinking airflow is likely your main issue. I always build below .2 ohms, and never have hot vapour production. Find an RDA with both high airflow, and plenty of room for adjustments, and go from there. That should help out with controlling vapour temps. Some of the more flavour minded RDAs will have plenty of airflow too, but they really vary.

I'd stick with cloud chaser RDAs to figure out how much airflow you like. If something like the TugBoat is still too warm for you, you might want to start looking into chuff tops.

 

[montijo505]

I just got a doge V2 and with a dual coil .25 ohm build its barely even warm with airflow wide open, plus it's only $45ish bucks for an authentic!


Sent from my iPhone using Tapatalk

 

[Rayne]

Yeah, the Doge v2 has a lot of airflow, thanks to the giant bore of the chuff. With my Doge v2, I can keep the vapour cold with a .12 ohm coil no problem. It's a pretty awesome RDA, for the price. It won't give you the best flavour, though.

 

[0rK1ngDAM Good Vapes]

I have them on top of a few
MPV 20W
King Mod V2 Unregulated 18650 Battery
KBox 40W
IPV 60W Box mod
I just bought the Tugboat I will give it a try and let you know how it works
Thanks

 

[Rayne]

Original TugBoat, or the TugBoat v2?

 

[ej1024]

Huh?? LOL
BIGBOYVAPER

 

[Xhalin]

Original TugBoat, or the TugBoat v2?

V2

 

[Jah]

you could also just drill out the airflow in your patriot. Being new to building, the patriot is a great deck to build on, very forgiving and plenty of room to mess around with

 

[Rayne]

Dat V2, man.... If you run into build limitations, let me know how well the competition cap/steam stack works for ya.