Recommend Me Some Easy .2 Kanthal Builds

[DrVapenstein]

So my standard build is 5 wraps of either twisted 26ga or 26ga fused clapton and they always fall between .23 and .25. I'm going to want a slightly lower resistance for my new squonkers and want to shoot for .19 to .2.

I suck at steam engine, and this is what I have or have in the mail.
twisted 26ga
alien 3*26/32
fused 26*2/32

I could sort this out through trial and error but I sure wouldn't mind a nudge toward a starting point. Thanks!

 

[bx10r]

Are you asking cause your going to make? You say you have in the mail...if there premade theyll tell u ohms. Or are they spools? Im confused a bit. If you have an android phone. Get vapetool pro. Itll be your best friend

Sent from a very cloudy room

 

[DrVapenstein]

no I don't use premade, I buy spools

 

[bx10r]

So these spools u list. All k1?

Sent from a very cloudy room

 

[bx10r]

If so 26x2/32 fused go 4 wraps on a 3.5
After pulse...about .2
On the alien go 5 wrap
How many core on the twisted?


Sent from a very cloudy room

 

[DrVapenstein]

How many core on the twisted?

2

 

[bx10r]

2

4 wraps

Sent from a very cloudy room

 

[zephyr]

So my standard build is 5 wraps of either twisted 26ga or 26ga fused clapton and they always fall between .23 and .25. I'm going to want a slightly lower resistance for my new squonkers and want to shoot for .19 to .2.

I suck at steam engine, and this is what I have or have in the mail.
twisted 26ga
alien 3*26/32
fused 26*2/32

I could sort this out through trial and error but I sure wouldn't mind a nudge toward a starting point. Thanks!

Single coil? 20g A1 fecral, 3mm id, 5/4 wraps