For the regulated bottom fed mods.
Become a Patron!
Regulated BF mods
- Thread starter penguiness
- Start date
I have several regulated BF mods most are SVA. I do have a Spectra Special Powder by Art & Mod.
If you have not had the chance to see one of these beauties, here are some pictures of the same side at differing directions and angles:
If you have not had the chance to see one of these beauties, here are some pictures of the same side at differing directions and angles:
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
trying to stay in and around 150-200$ my absolute cap is 225$
cant justify spending more than that.
cant justify spending more than that.
Mookooo is an excellent mod. While it is 3D printed, they feel really nice in the hand and are more durable than some of the fancier ones.
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
do you have link? I couldn't find anything
They release the new ones in batches. I will post here when the next batch is due to be released (I get email of new products on their site). The site they will be on is https://www.dot-mod.com/collections/mokooo
There are used ones come up once a month or so. I will keep a watch out for those for you. Those usually sell around 190-200 including shipping.
There are used ones come up once a month or so. I will keep a watch out for those for you. Those usually sell around 190-200 including shipping.
Hi Peng...hope you're doing fine...
Thanks for starting a thread for regulated bottom feeders.
I been looking high and low for a 200 watt BF mod....Catfish will have his ready in a couple weeks, but I would still like another source. Seems like every time I find one it's usually on the other side of the pond their sold the same day.
If someone designed a 200 watt bottom feeder for about 250-350 bucks they'd sell better than hotcakes.
Should you come across a DNA 200 squonker please post it...or better yet...PM me, so *I* can snatch it...
I been seriously thinking about making DNA 200 BF mods, there is one hell of a market for them and they are not readily available anywhere in the world (yet).
I'd be happy with a DNA75 Squonker mod.
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
lost vape effusion was said to have one upcoming. haven't heard much about it past thatHi Peng...hope you're doing fine...
Thanks for starting a thread for regulated bottom feeders.
I been looking high and low for a 200 watt BF mod....Catfish will have his ready in a couple weeks, but I would still like another source. Seems like every time I find one it's usually on the other side of the pond their sold the same day.
If someone designed a 200 watt bottom feeder for about 250-350 bucks they'd sell better than hotcakes.
Should you come across a DNA 200 squonker please post it...or better yet...PM me, so *I* can snatch it...
I been seriously thinking about making DNA 200 BF mods, there is one hell of a market for them and they are not readily available anywhere in the world (yet).
Nothing wrong with 3D printed mods. I have yet to break any of mine. In fact, they're the ones I take with me when I'm going places I'd rather not take one of my "nice" mods.
It does look nice Rossum....!Nothing wrong with 3D printed mods. I have yet to break any of mine. In fact, they're the ones I take with me when I'm going places I'd rather not take one of my "nice" mods.
Where would you get a mod like that? Name? Link?Nothing wrong with 3D printed mods. I have yet to break any of mine. In fact, they're the ones I take with me when I'm going places I'd rather not take one of my "nice" mods.
Mokooo Neon-R are DNA40. All of my regulated are DNA40.
Svapiamo makes a regulated 30w with the iStick board for cheap, if that is something that would suit you: http://svapiamo.com/64-box-mod-istick-30-w-bf
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
acrtually , 40w would work, but ideally I'm wanting either an sx350 or a dna200.
I like my 40's but I'm at a point where I'm sick of buying stuff -lol
I built it. I was on gdeal's beta team during the summer of 2014, although the pic is obviously a DNA40 so it's from the fall of 2014.
Unfortunately, gdeal was run off of ECF over a year ago (much like Roxy was more recently) and went back to doing more lucrative things for a living rather than designing mods and sharing the designs freely.
Personally. I've decided I'm just about as happy with mechanicals. But I still use that mod (and its little mechanical brother) regularly.
I haven't had good luck with the SX350 boards but admit that I have only tried two and from the same mod maker.
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
sounds like a bum modder
I love the hell out of my GDNA 40's, but I'd still like a 200 watt for all the crazy attys I have using clapton coils.
Even a printed 200 watt mod would suffice. I need to talk to a friend in the CAD business.
Even a printed 200 watt mod would suffice. I need to talk to a friend in the CAD business.
I live a simple life. I mix all my juice at 15mg which gives me a satisfying vape using a moderate amount of power.
I understand Ross......I don't have any qualms with my DNA 40's....I have other things in mind for the 200's.I live a simple life. I mix all my juice at 15mg which gives me a satisfying vape using a moderate amount of power.
I guess I don't see the tradeoff required in terms of form factor, because I just don't see a way to make a DNA200 based squonk mod that could be described as "svelte". Hopefully someone will prove me wrong at some point, but given that I've been happy vaping at well under 40 watts for 2+ years, I don't have any use for a boxy, fat mod.
I see! Thank you anyways!
During my research, I found one place for a DNA200 mod. However, it's a DIY kit, that comes in various colors.
http://www.shapeways.com/product/6ESX2FFXK/squonklab950-dna200-chassis?optionId=58603649
EDIT:
According to the measurements given for the LiPo pack, I found three packs with larger Capacity. If you decide to order from that vendor, make sure to select the proper warehouse (international = China, US-East, US-West)
http://www.hobbyking.com/hobbyking/...t_1000mAh_3S_25C_Lipo_Pack_AR_Warehouse_.html
http://www.hobbyking.com/hobbyking/...t_1000mAh_3s_40c_Lipo_Pack_AR_Warehouse_.html
http://www.hobbyking.com/hobbyking/...t_1300mAh_3S_25C_Lipo_Pack_AR_Warehouse_.html
http://www.shapeways.com/product/6ESX2FFXK/squonklab950-dna200-chassis?optionId=58603649
EDIT:
According to the measurements given for the LiPo pack, I found three packs with larger Capacity. If you decide to order from that vendor, make sure to select the proper warehouse (international = China, US-East, US-West)
http://www.hobbyking.com/hobbyking/...t_1000mAh_3S_25C_Lipo_Pack_AR_Warehouse_.html
http://www.hobbyking.com/hobbyking/...t_1000mAh_3s_40c_Lipo_Pack_AR_Warehouse_.html
http://www.hobbyking.com/hobbyking/...t_1300mAh_3S_25C_Lipo_Pack_AR_Warehouse_.html
Last edited:
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
that's a distinct possibility. depending on what the lost vape model retails at. I may go this route.
Neuner....I'm going to give it a shot at building the 200, the 40 watt shapeways was built very well.
Cool! Let us know, how it works out for you. I'll have to wait for a while, due to having spent a lot of money on vape gear recently.
For those that didn't see the post in the other thread, here's the Lost Vape Squonker.
https://originvape.com/product/lost-vape-halcyon-squonker-dna200/
Just noticed, they (shapeways) also have a larger DIY mod to hold a 1500 mAh LiPo http://www.shapeways.com/product/XY...0-chassis?optionId=58556183&li=more-from-shop
Dog, you know the dimensions of the soft Italian squonk bottles? I don't have anything here to measure it at the moment.
If there is a problem with real-estate holding an oval 8.5 ml Italian bottle I may go with this one for the extra space and stay with the smaller battery. Although, for the price of the shells I think I'll buy both to experiment with batteries and bottles.
17 point something. I've seen this discussion a few times on facebook. People buy the print, then can't get a bottle to fit.
Thanks man....!
The batteries listed above, are smaller than the LiPo's measurements shown on the page.
Just to make sure, besides the parts needed from elsewhere, you'll need a few parts for the box itself.
For the 950 mAh LiPo box, you'd need:
Chassis $43.00
Insert $28.00
Door $13.00
Buttons $4.00
Neuner, I'm going to buy a two of each boxes and different size batteries, make four mods to find out what the best configuration is.
Evic board squonkers are available under $150 USD:
http://www.svapiamo.com/64-box-mod-istick-30-w-bf
http://www.svapiamo.com/64-box-mod-istick-30-w-bf
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
I likes that!!!!!!!!!!!!!!!!Another shout out to a Spectra Special Powder. I LOVE this thing! Next try, a Special Powder (purple of course) EVO. A girl can dream right?
View attachment 49709
Purrrity!Another shout out to a Spectra Special Powder. I LOVE this thing! Next try, a Special Powder (purple of course) EVO. A girl can dream right?
View attachment 49709
Another shout out to a Spectra Special Powder. I LOVE this thing! Next try, a Special Powder (purple of course) EVO. A girl can dream right?
View attachment 49709
Congrats, AngiBe! Love the colors. What do you get at differing angles, color-wise? I get yellow to orange, black to purple, green to black. Green and yellow are the main colors (present the most often).
AngiBe
Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Thanks girl! It's not "new" anymore. I've had it about a month. The colors I get are a deep purple:
a copper, kind of a hot pink/rosey color, a vivid Blue/purple (that color in the upper right corner) and black. I absolutely LOVE the copper/dark purple combo and that's actually a lot of colors in my house. LOLOLThe only thing I'd change on it would be the door. I think if the door was a metallic copper or dark purple, it would be cool. Or even black. The door is a lighter purple.
Thanks girl! It's not "new" anymore. I've had it about a month. The colors I get are a deep purple:
The only thing I'd change on it would be the door. I think if the door was a metallic copper or dark purple, it would be cool. Or even black. The door is a lighter purple.
They will make a new door for you (each is custom fit and not interchangeable), but you would be without it for a couple of months from what I have seen. I don't want to be without mine that long!
AngiBe
Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Ugh! Would LOVE a new door but that's a long time. Do they want the whole mod or could I just ship my current door and they can fit to size with that?
Just your current door, but you do need to arrange it with them beforehand so they have time to gather the wood that you want. Most people get more than one made so they only pay the DHL shipping to/from once.
