Reuleaux -RX200S- with TFV12

[Kellywells55]

I recently aquired this vape and im new to vaping so i decided to grab the best tank out from what ive heard (TFV12) although the mod came with a TFV8.
1.) Im still learning how to use the undate on the RX200S and i ran across TCR Mode 1,2&3 what would be the best recommendation for TRC 1,2&3 for the TFV 12 before i decide to try myself and do something wrong.
2.) How to set up tcni,tcti,& tcss for best quality vaping.
3.) How to adjust the volts and the ohm's and how to setup the thing next to ohm's bottom left on REULEAUX -RX200S-???

Thank you to whoever help!!

 

[SirRichardRear]

I recently aquired this vape and im new to vaping so i decided to grab the best tank out from what ive heard (TFV12) although the mod came with a TFV8.
1.) Im still learning how to use the undate on the RX200S and i ran across TCR Mode 1,2&3 what would be the best recommendation for TRC 1,2&3 for the TFV 12 before i decide to try myself and do something wrong.
2.) How to set up tcni,tcti,& tcss for best quality vaping.
3.) How to adjust the volts and the ohm's and how to setup the thing next to ohm's bottom left on REULEAUX -RX200S-???

Thank you to whoever help!!

1) you can only use power mode. Smok doesn't make any coils for temp control. TCR is for temp control
2) same as 1. that Ni200 wire, Titanium wire, and SS wire. all of smok coils are kanthal
3) Never adjust the ohms. all you have to do is put the tank on and adjust the wattage. the volts will adjust accordingly automatically

 

[Angrygod50]

↑↑ What he said, also Smok over rates there coils so start at or below the lowest recommended setting and up the watts until you get a good vape.

 

[SirRichardRear]

↑↑ What he said, also Smok over rates there coils so start at or below the lowest recommended setting and up the watts until you get a good vape.

this too^
except the T12 on the TFV12, that thing can actually vape well above the "recommend" range. i took a few hits at 300 and wasn't even that hot lol

 

[XEVU]

You'll find that watts are personal preference. I use 105W on my v12 and v8. Also, don't be too quick to give up on that v8. They are excellent tanks and give great flavor and clouds.
Just my opinion, I'm by no means an expert. =)

I'm not a feather plucker or a feather plucker's son but I'll pluck a feathered pheasant until the feather plucker comes.

 

[Kellywells55]

Thanks for the help one there thing i have a dry tank but its regulated for the single battery mods or starter vapes. I bought the adaptor for it to fit my mod would that tank be used for TCR?

 

[SirRichardRear]

Thanks for the help one there thing i have a dry tank but its regulated for the single battery mods or starter vapes. I bought the adaptor for it to fit my mod would that tank be used for TCR?

what tank is it? and no adapter can make it usable in TCR. to use temp control mods you need to use a wire suitable for it. The best one IMO is SS316L

 

[Kellywells55]

 

[Kellywells55]

Content removed by staff.

Member Warned

 

[SirRichardRear]

Invu dry tank and wax tank

that stuff is banned for discussion on this forum. this isn't the place for it

 

[Kellywells55]

Sorry ill stop talking .

 

[Kellywells55]

.

 

[Angrygod50]

Seems to me you were just told that subject was banned here.