Hi Vaping Underground members, In this review i take a look at the Revenant Vape X TVL Delta 100w Squonk Kit with Reload RDA which is manufactured by Vaporesso. The Delta Squonk Kit was supplied for the purpose of this review by Jessica from Vaporesso.
https://www.revenantvape.com/delta-kit/
Introduction
The Delta kit is a collaboration between TVL and Revenant Vape and is manufactured by Vaporesso. The Reload is a 24 mm single-coil or mesh RDA that is designed mainly for squonking and has a leakproof design. The Delta is a single battery device which supports a 20700/21700 (or 18650 with adapter). The Delta is a regulated squonk device that houses Vaporesso’s OMNI 4.0 board and fires up to 100 watts. It also features a very innovative squonk mechanism, using a button instead of pressing a soft bottle, and a practical push-to-fill (PTF) design that allows you to fill the internal squonk tank without removing it from the device.
-----------------------------------------------------------------------------------------------------
In the Box
Contents:
1x Delta Mod (Battery Adapter inside)
1x Reload RDA Tank
1x Plastic Bottle
3x Clapton Coils Wire (NI80, 0.2Ω)
1x 510 Drip Tip Adapter
6x Tank Seal Ring
2x Drip Tip Seal Ring
4x Slotted Screw-Side
1x Slotted Screw-Bottom
1x Allen Key T Screwdriver
1x USB Cable
1x User Manual
-----------------------------------------------------------------------------------------------------
Aesthetics and Ergonomics
The Delta Kit came in quite plain Black cardboard packaging which is a contrast to the device it'self which is a bright, busy looking device full of colour. Some people will not like the heavy use of branding on the device but others will find the device eye catching in all colours. I received the Rainbow version which consists of a Rainbow accented rim around the device with colourful fill design and branding, the main chassis is Gunmetal and it comes with a matching Rainbow Reload RDA. The other colour options are Gold+Silver, Black+Red and Black+Silver, in my opinion all options look aesthetically appealing. The Delta i believe is constructed using Zinc Alloy and the casing is thick, the build quality is excellent but it is quite a heavy device. The two sides are mainly the Rainbow rim with fill design, the spine has a juice viewing window. The front of the device has a large rectangular fire button at the top followed by the 0.96″ TFT Colour Screen, underneath is the navigational buttons on a rocker which surrounds a central mode button, finally at the bottom is the micro USB port. The base of the device is the battery door which has venting, branding and the juice tank valve visible so it can be filled without opening the device. Moving to the top we have a flat surface one side that houses the 510 plate with Gold plated, spring loaded BF 510, the other side is sloped and houses the squonk press button. The device is very comfortable in the hand with convenient positioning of the squonk button.
-----------------------------------------------------------------------------------------------------
Delta Kit Specs:
Dimensions: 55.9×29.8x127mm
Refillable Tank Capacity: 6.5ml
Display: 0.96″ TFT Colour Screen
Single Battery: 21700/20700/18650
Power Range: 5-100W
Resistance Range: 0.03~5Ω
Colours: Rainbow, Gold+Silver, Black+Red, Black+Silver
Delta Kit Features:
Push-to-Squonk, One button to fill e-juice
Powered by Single Battery 21700/20700/18650, can fire up to 100W.
Insta-Fire Technology, 0.001s Firing Speed
RELOAD RDA Tank Composite Heating Materials, Minimizes Leaking
Omni Board 4.0 Super Player Mode, 1A quick charging
PTF Filling System is Easy, simple, and secure
-----------------------------------------------------------------------------------------------------
Reload RDA Overview
It's the good, average and the why when it comes to the Reload RDA. The why i will get on with straightaway, i know there are countless vaping products that have been released and coming up with original names might not be as easy as it sounds but i find it hard to believe TVL were unaware their was a popular RDA with the title Reload in the marketplace already.
The deck has 2 large flattened posts (like blocks) with a slot in the top of each post as if the RDA was meant to be used with mesh yet only normal coils are provided, so a pro and con as obviously the RDA is suitable for both mesh and standard coil builds but some included mesh would of been a good move.
The Reload is a single coil build deck and fitting your coil legs using the slots couldn't be easier but you do need to leave your legs longer than normal as the terminals are a distant apart, wicking is standard just feed your cotton ends into the juice channels.
The deck as a raised pin and there is also a channel between negative and positive posts so when you squonk the liquid goes into the channel and disperses evenly, some juice goes onto the post tops but these are very slightly slanted (not noticeable by eye) and this liquid immediately flows to the centre and into the channel, any access gets sucked back into the squonk tank.
The airflow is pretty standard dual cyclops with stopper and is directly aimed at the middle of your coil, tolerance when adjusting is very good so fine adjusting is no problem, finally the top-cap locks into position and has a leakproof design.
The Reload does also come with all the spares you would expect, 3 Clapton Coils (NI80, 0.2Ω), 510 drip tip adaptor and a standard pin.
-----------------------------------------------------------------------------------------------------
Fitting The Battery
Your single 2x700 battery or 18650 with supplied adaptor is fitted via the battery door on the bottom of the device. To open you need to push the bottom outwards then it lifts up to reveal both battery compartment and to the other side the plastic squonk tank with bottom valve. Simply place the battery in place negative up and then push down the door and slide shut. The door fastens in place very securely and is as sturdy as the rest of the device, a job very well done!
-----------------------------------------------------------------------------------------------------
The Squonk System
Rather than using a soft bottle which is pressed to force liquid up a tube and through the BF 510 the delta uses an internal plastic tank with a bottom valve. The tank can be removed for cleaning but slots back into place with no issues, the bottom door (already described) has a cutout hole that lines up with the valve on the bottom of the tank so you can fill the tank without removing it from the device and without opening the door. The kit comes with an empty bottle with an ideal nozzle for filling the tank through the push valve but many bottles will work just fine. On the top of the device on a nicely angled slant we have a sturdy, nicely machined button which has etched on it "PUSH TO SQUONK", pressing this button feeds liquid from the tank to the 510 and pumping the button is not needed simply hold the button down for 3 or 4 seconds and the cotton is nicely saturated, the system works impressively smoothly. The only time the system becomes less smooth is when the liquid level in the tank gets low so filling when still about 15% full worked best for me, your level can easily be seen through the viewing window on the spine of the device and filling is so hassle free filling when still 15% of your juice left was no issue i suppose unless you want to change flavours.
-----------------------------------------------------------------------------------------------------
Review Continued Below:
https://www.revenantvape.com/delta-kit/
Introduction
The Delta kit is a collaboration between TVL and Revenant Vape and is manufactured by Vaporesso. The Reload is a 24 mm single-coil or mesh RDA that is designed mainly for squonking and has a leakproof design. The Delta is a single battery device which supports a 20700/21700 (or 18650 with adapter). The Delta is a regulated squonk device that houses Vaporesso’s OMNI 4.0 board and fires up to 100 watts. It also features a very innovative squonk mechanism, using a button instead of pressing a soft bottle, and a practical push-to-fill (PTF) design that allows you to fill the internal squonk tank without removing it from the device.
-----------------------------------------------------------------------------------------------------
In the Box
Contents:
1x Delta Mod (Battery Adapter inside)
1x Reload RDA Tank
1x Plastic Bottle
3x Clapton Coils Wire (NI80, 0.2Ω)
1x 510 Drip Tip Adapter
6x Tank Seal Ring
2x Drip Tip Seal Ring
4x Slotted Screw-Side
1x Slotted Screw-Bottom
1x Allen Key T Screwdriver
1x USB Cable
1x User Manual
-----------------------------------------------------------------------------------------------------
Aesthetics and Ergonomics
The Delta Kit came in quite plain Black cardboard packaging which is a contrast to the device it'self which is a bright, busy looking device full of colour. Some people will not like the heavy use of branding on the device but others will find the device eye catching in all colours. I received the Rainbow version which consists of a Rainbow accented rim around the device with colourful fill design and branding, the main chassis is Gunmetal and it comes with a matching Rainbow Reload RDA. The other colour options are Gold+Silver, Black+Red and Black+Silver, in my opinion all options look aesthetically appealing. The Delta i believe is constructed using Zinc Alloy and the casing is thick, the build quality is excellent but it is quite a heavy device. The two sides are mainly the Rainbow rim with fill design, the spine has a juice viewing window. The front of the device has a large rectangular fire button at the top followed by the 0.96″ TFT Colour Screen, underneath is the navigational buttons on a rocker which surrounds a central mode button, finally at the bottom is the micro USB port. The base of the device is the battery door which has venting, branding and the juice tank valve visible so it can be filled without opening the device. Moving to the top we have a flat surface one side that houses the 510 plate with Gold plated, spring loaded BF 510, the other side is sloped and houses the squonk press button. The device is very comfortable in the hand with convenient positioning of the squonk button.
-----------------------------------------------------------------------------------------------------
Delta Kit Specs:
Dimensions: 55.9×29.8x127mm
Refillable Tank Capacity: 6.5ml
Display: 0.96″ TFT Colour Screen
Single Battery: 21700/20700/18650
Power Range: 5-100W
Resistance Range: 0.03~5Ω
Colours: Rainbow, Gold+Silver, Black+Red, Black+Silver
Delta Kit Features:
Push-to-Squonk, One button to fill e-juice
Powered by Single Battery 21700/20700/18650, can fire up to 100W.
Insta-Fire Technology, 0.001s Firing Speed
RELOAD RDA Tank Composite Heating Materials, Minimizes Leaking
Omni Board 4.0 Super Player Mode, 1A quick charging
PTF Filling System is Easy, simple, and secure
-----------------------------------------------------------------------------------------------------
Reload RDA Overview
It's the good, average and the why when it comes to the Reload RDA. The why i will get on with straightaway, i know there are countless vaping products that have been released and coming up with original names might not be as easy as it sounds but i find it hard to believe TVL were unaware their was a popular RDA with the title Reload in the marketplace already.
The deck has 2 large flattened posts (like blocks) with a slot in the top of each post as if the RDA was meant to be used with mesh yet only normal coils are provided, so a pro and con as obviously the RDA is suitable for both mesh and standard coil builds but some included mesh would of been a good move.
The Reload is a single coil build deck and fitting your coil legs using the slots couldn't be easier but you do need to leave your legs longer than normal as the terminals are a distant apart, wicking is standard just feed your cotton ends into the juice channels.
The deck as a raised pin and there is also a channel between negative and positive posts so when you squonk the liquid goes into the channel and disperses evenly, some juice goes onto the post tops but these are very slightly slanted (not noticeable by eye) and this liquid immediately flows to the centre and into the channel, any access gets sucked back into the squonk tank.
The airflow is pretty standard dual cyclops with stopper and is directly aimed at the middle of your coil, tolerance when adjusting is very good so fine adjusting is no problem, finally the top-cap locks into position and has a leakproof design.
The Reload does also come with all the spares you would expect, 3 Clapton Coils (NI80, 0.2Ω), 510 drip tip adaptor and a standard pin.
-----------------------------------------------------------------------------------------------------
Fitting The Battery
Your single 2x700 battery or 18650 with supplied adaptor is fitted via the battery door on the bottom of the device. To open you need to push the bottom outwards then it lifts up to reveal both battery compartment and to the other side the plastic squonk tank with bottom valve. Simply place the battery in place negative up and then push down the door and slide shut. The door fastens in place very securely and is as sturdy as the rest of the device, a job very well done!
-----------------------------------------------------------------------------------------------------
The Squonk System
Rather than using a soft bottle which is pressed to force liquid up a tube and through the BF 510 the delta uses an internal plastic tank with a bottom valve. The tank can be removed for cleaning but slots back into place with no issues, the bottom door (already described) has a cutout hole that lines up with the valve on the bottom of the tank so you can fill the tank without removing it from the device and without opening the door. The kit comes with an empty bottle with an ideal nozzle for filling the tank through the push valve but many bottles will work just fine. On the top of the device on a nicely angled slant we have a sturdy, nicely machined button which has etched on it "PUSH TO SQUONK", pressing this button feeds liquid from the tank to the 510 and pumping the button is not needed simply hold the button down for 3 or 4 seconds and the cotton is nicely saturated, the system works impressively smoothly. The only time the system becomes less smooth is when the liquid level in the tank gets low so filling when still about 15% full worked best for me, your level can easily be seen through the viewing window on the spine of the device and filling is so hassle free filling when still 15% of your juice left was no issue i suppose unless you want to change flavours.
-----------------------------------------------------------------------------------------------------
Review Continued Below:
